Download or read book Grain Boundary Cracking in Metals Under Stress at Elevated Temperatures written by JACK. BRETT and published by . This book was released on 1961 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study was made of the effect of purification and of a number of metal and oxide additions upon the occurrence of intergranular cracking in brass, Cu, Ni, Ti and Zr under t nsion at elevated temperatur s. Purificatio by a variety of means inhibited in ergranular cracking in brass, Cu, and Ni. Zr additions also decreased the frequency of grain boundary cracks in brass and Cu, while Al2O3 additions increased the number of cracks. Under a wide variety of conditions, Ti and Zr of commercial purity were immune to grain boundary cracks and intergranular fracture. A few experiments re performed to demonstrate t e parallel effect of impurities and additions upon the nucleation of voids during diffusion; the initiation of grain boundary cracks during creep; the mechanism of crack nucleation by vacancy condensation is discussed (Aut or).
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book Deformation and Fracture of Metals at Elevated Temperatures written by Arup R. Chaudhuri and published by . This book was released on 1958 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture at High Temperatures written by Hermann Riedel and published by Springer. This book was released on 2014-01-13 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Behavior of Materials at Elevated Temperatures written by Francis Reynolds Shanley and published by . This book was released on 1961 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings Creep Fracture in High Temperature Components written by I. A. Shibli and published by DEStech Publications, Inc. This book was released on 2009 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compendium of European and worldwide research investigating creep, fatigue and failure behaviors in metals under high-temperature and other service stresses. It helps set the standards for coordinating creep data and for maintaining defect-free quality in high-temperature metals and metal-based weldments.
Download or read book Flow and Fracture at Elevated Temperatures written by Rishi Raj and published by . This book was released on 1985 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the journal of Courtney Von Dragen Smith: middle child, product of divorce, would-be vegetarian. She writes the first mega-negative page the day after her boyfriend, "such a Dave, " breaks up with her because he's heading off to college. Angry and humiliated, Courtney vows to survive senior year on the anti-guy plan. But can she really give up guys and focus on friends, school, and her job at the hip cafe Truth or Dairy? Or will a stint in student government, an epileptic dog, and a guy named Grant ("like-the lake") Superior turn her world upside down and prove her journal right?
Download or read book Fatigue and Durability of Metals at High Temperatures written by S. S. Manson and published by ASM International. This book was released on 2009 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept to application, this book describes the method of strain-range partitioning for analyzing time-dependent fatigue. Creep (time-dependent) deformation is first introduced for monotonic and cyclic loading. Multiple chapters then discuss strain-range partitioning in details for multi-axial loading conditions and how different loading permutations can lead to different micro-mechanistic effects. Notably, the total-strain method of strain-range partitioning (SRP) is described, which is a methodology that sees use in several industries. Examples from aerospace illustrate applications, and methods for predicting time-dependent metal fatigue are critiqued.
Download or read book Creep and High Temperature Deformation of Metals and Alloys written by Stefano Spigarelli and published by MDPI. This book was released on 2019-12-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.
Download or read book A Review of Underclad Cracking in Pressure vessel Components written by A. G. Vinckier and published by . This book was released on 1974 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elevated Temperature Testing Problem Areas written by H. R. Voorhees and published by ASTM International. This book was released on 1970 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion and Materials Applications written by George Y. Lai and published by ASM International. This book was released on 2007-01-01 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Lai's 1990 book, High-Temperature Corrosion of Engineering Alloys, is recognized as authoritative and is frequently consulted and often cited by those in the industry. His new book, almost double in size with seven more chapters, addresses the new concerns, new technologies, and new materials available for those engaged in high-temperature applications. As we strive for energy efficiency, the realm of high-temperature environments is expanding and the need for information on high temperature materials applications was never greater. In addition to extensive expansion on most of the content of the original book, new topics include erosion and erosion-corrosion, low NOx combustion in coal-fired boilers, fluidized bed combustion, and the special demands of waste-to-energy boilers, waste incinerators, and black liquor recovery boilers in the pulp and paper industry. The corrosion induced by liquid metals is discussed and protection options are presented.
Download or read book Grain Boundary Segregation in Metals written by Pavel Lejcek and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.
Download or read book Stress Corrosion Cracking written by V S Raja and published by Elsevier. This book was released on 2011-09-22 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of stress corrosion cracking (SCC), which causes sudden failure of metals and other materials subjected to stress in corrosive environment(s), has a significant impact on a number of sectors including the oil and gas industries and nuclear power production. Stress corrosion cracking reviews the fundamentals of the phenomenon as well as examining stress corrosion behaviour in specific materials and particular industries.The book is divided into four parts. Part one covers the mechanisms of SCC and hydrogen embrittlement, while the focus of part two is on methods of testing for SCC in metals. Chapters in part three each review the phenomenon with reference to a specific material, with a variety of metals, alloys and composites discussed, including steels, titanium alloys and polymer composites. In part four, the effect of SCC in various industries is examined, with chapters covering subjects such as aerospace engineering, nuclear reactors, utilities and pipelines.With its distinguished editors and international team of contributors, Stress corrosion cracking is an essential reference for engineers and designers working with metals, alloys and polymers, and will be an invaluable tool for any industries in which metallic components are exposed to tension, corrosive environments at ambient and high temperatures. - Examines the mechanisms of stress corrosion cracking (SCC) presenting recognising testing methods and materials resistant to SCC - Assesses the effect of SCC on particular metals featuring steel, stainless steel, nickel-based alloys, magnesium alloys, copper-based alloys and welds in steels - Reviews the monitoring and management of SCC and the affect of SCC in different industries such as petrochemical and aerospace
Download or read book Creep and Fatigue in Elevated Temperature Applications written by and published by . This book was released on 1975 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grain boundary Cracking in Pure Metals at Low Temperatures written by Paul Frederic Weihrauch and published by . This book was released on 1969 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elevated Temperature Effects on Fatigue and Fracture written by Robert S. Piascik and published by ASTM International. This book was released on 1997 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:
