Download or read book Glocalized Solutions for Sustainability in Manufacturing written by Jürgen Hesselbach and published by Springer Science & Business Media. This book was released on 2011-03-19 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 continues a long tradition of scientific meetings focusing on the exchange of industrial and academic knowledge and experiences in life cycle assessment, product development, sustainable manufacturing and end-of-life-management. The theme “Glocalized Solutions for Sustainability in Manufacturing” addresses the need for engineers to develop solutions which have the potential to address global challenges by providing products, services and processes taking into account local capabilities and constraints to achieve an economically, socially and environmentally sustainable society in a global perspective. Glocalized Solutions for Sustainability in Manufacturing do not only involve products or services that are changed for a local market by simple substitution or the omitting of functions. Products and services need to be addressed that ensure a high standard of living everywhere. Resources required for manufacturing and use of such products are limited and not evenly distributed in the world. Locally available resources, local capabilities as well as local constraints have to be drivers for product- and process innovations with respect to the entire life cycle. The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 serves as a platform for the discussion of the resulting challenges and the collaborative development of new scientific ideas.

Download or read book Glocalized Solutions for Sustainability in Manufacturing written by J Rgen Hesselbach and published by Springer. This book was released on 2011-03-30 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Glocalized Solutions for Sustainability in Manufacturing written by Jürgen Hesselbach and published by Springer. This book was released on 2011-03-23 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 continues a long tradition of scientific meetings focusing on the exchange of industrial and academic knowledge and experiences in life cycle assessment, product development, sustainable manufacturing and end-of-life-management. The theme “Glocalized Solutions for Sustainability in Manufacturing” addresses the need for engineers to develop solutions which have the potential to address global challenges by providing products, services and processes taking into account local capabilities and constraints to achieve an economically, socially and environmentally sustainable society in a global perspective. Glocalized Solutions for Sustainability in Manufacturing do not only involve products or services that are changed for a local market by simple substitution or the omitting of functions. Products and services need to be addressed that ensure a high standard of living everywhere. Resources required for manufacturing and use of such products are limited and not evenly distributed in the world. Locally available resources, local capabilities as well as local constraints have to be drivers for product- and process innovations with respect to the entire life cycle. The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 serves as a platform for the discussion of the resulting challenges and the collaborative development of new scientific ideas.

Download or read book Sustainable Manufacturing written by Rainer Stark and published by Springer. This book was released on 2017-01-16 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the research results of the Collaborative Research Center 1026 “Sustainable manufacturing - shaping global value creation”. The book aims at providing a reference guide of sustainable manufacturing for researchers, describing methodologies for development of sustainable manufacturing solutions. The volume is structured in four chapters covering the following topics: sustainable manufacturing technology, sustainable product development, sustainable value creation networks and systematic change towards sustainable manufacturing. The target audience comprises both researchers and practitioners in the field of sustainable manufacturing, but the book may also be beneficial for graduate students.

Download or read book Sustainable Manufacturing written by Günther Seliger and published by Springer Science & Business Media. This book was released on 2012-06-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annual series Global Conferences on Sustainable Manufacturing (GCSM) sponsored by the International Academy for Production Engineering (CIRP) is committed to excellence in the creation of sustainable products and processes that conserve energy and natural resources, have minimal negative impacts upon the natural environment and society, and adhere to the core principle of sustainability by considering the needs of the present without compromising the ability of future generations to meet their own needs. To promote this noble goal, there is a great need for increased awareness in education and training, including the dissemination of new findings on principles and practices of sustainability applied to manufacturing. The series Global Conferences on Sustainable Manufacturing offers international colleagues the opportunity to network, expand their knowledge, and improve practice globally.

Download or read book Leveraging Technology for a Sustainable World written by David A. Dornfeld and published by Springer Science & Business Media. This book was released on 2012-04-23 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 19th CIRP Conference on Life Cycle Engineering continues a strong tradition of scientific meetings in the areas of sustainability and engineering within the community of the International Academy for Production Engineering (CIRP). The focus of the conference is to review and discuss the current developments, technology improvements, and future research directions that will allow engineers to help create green businesses and industries that are both socially responsible and economically successful. The symposium covers a variety of relevant topics within life cycle engineering including Businesses and Organizations, Case Studies, End of Life Management, Life Cycle Design, Machine Tool Technologies for Sustainability, Manufacturing Processes, Manufacturing Systems, Methods and Tools for Sustainability, Social Sustainability, and Supply Chain Management.

Download or read book Re engineering Manufacturing for Sustainability written by Andrew Y. C. Nee and published by Springer Science & Business Media. This book was released on 2013-04-08 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing, etc.

Download or read book Sustainable Design and Manufacturing 2017 written by Giampaolo Campana and published by Springer. This book was released on 2017-04-25 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes papers presented at the 4th International Conference on Sustainable Design and Manufacturing (SDM-17) held in Bologna, Italy, in April 2017. The conference covered a wide range of topics from cutting-edge sustainable product design and service innovation, sustainable processes and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of the societal impact of sustainability including research for circular economy. Application areas are wide and varied, and the book provides an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

Download or read book Sustainable Production Automation written by Jingshan Li and published by Momentum Press. This book was released on 2017-01-12 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable production automation, as an effective way to enable and expedite transitions to sustainability and enhance resource utilizations, attracts substantial efforts from researchers in both academy and industry. This book presents the recent development of innovative algorithms, models, heuristics, hardware and software in broad areas of sustainable production systems. It focuses on design, analysis and management of the processes involved in the product life cycle (from design to delivery to return) to have the minimal negative impacts on society (including environmental, economic and social). The contributors are experts from both universities and industrial research centers.

Download or read book Planning of Eco efficient Process Chains for Automotive Component Manufacturing written by Christopher Schmidt and published by Springer Nature. This book was released on 2021-01-04 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the introduction of emerging manufacturing technologies and planning cases with established technologies. The planning of eco-efficient process chains is crucial for manufacturing companies. However, in the state-of-the-art planning, various barriers exist towards the integration of the environmental dimension. Against this background, a concept for the integration of classic lean and environmental criteria into the three planning phases of process chains is presented. During concept planning, the Technology Assessment Tool supports planners in the identification of eco-efficient technologies. During rough planning, the Value Stream Design Tool enables the derivation of a production line based on workpiece characteristics. For detailed planning, tools for eco-efficient machine and process chain configuration are provided. Three case studies from large-scale automotive component manufacturing with established and emerging technologies demonstrate the tool applicability.

Download or read book Advances in Production Management Systems Competitive Manufacturing for Innovative Products and Services written by Christos Emmanouilidis and published by Springer. This book was released on 2013-08-13 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes IFIP AICT 397 and 398 constitute the thoroughly refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2012, held in Rhodes, Greece, in September 2012. The 182 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 6 parts: sustainability; design, manufacturing and production management; human factors, learning and innovation; ICT and emerging technologies in production management; product and asset lifecycle management; and services, supply chains and operations.

Download or read book Resource Efficiency in Manufacturing Value Chains written by Stefan Alexander Blume and published by Springer Nature. This book was released on 2020-11-04 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a concept for fostering resource efficient manufacturing. The protection of our environment demands a more responsible use of natural resources, and a higher degree of transparency along manufacturing value chains will be required in order to make significant advances in this context. Industrial decision makers must be provided with adequate methods and tools to simultaneously and systematically pursue technical, economic and environmental targets. Building on established and complementary methods, such as material and energy flow analysis (MEFA), value stream mapping (VSM), life cycle costing (LCC) and environmental life cycle assessment (LCA), this book introduces a concept that allows a holistic modeling and multi-dimensional performance assessment of manufacturing systems on different levels – from processes up to entire value chains and product life cycles. It also demonstrates the application of the concept using two case studies from the metal mechanic industry.

Download or read book Progress in Sustainable Manufacturing written by Jayakrishna Kandasamy and published by Springer Nature. This book was released on 2023-06-12 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides recent developments in sustainable manufacturing ranging from product designing to product delivery. It focuses on key challenges and solutions at various stages such as product design, material selection, material processing, manufacturing and energy consumption to ensure sustainability at every stage of product lifecycle. It further offers solutions to build sustainable product by responsible consumption and production. The role of advanced technologies in sustainable manufacturing is also covered in this book. Given the topics covered, this book will be useful for the researchers and professionals working in the area of mechanical engineering, especially industrial and production engineering.

Download or read book Advances in Sustainable Manufacturing written by Günther Seliger and published by Springer Science & Business Media. This book was released on 2011-05-27 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-renewable materials can no longer be disposed once humankind's ever increasing needs cannot be fulfilled anymore due to limited resources. Reuse and recycling become inevitable requirements for product and process design. Renewable resources must not be consumed in quantities higher than can be regained. New technologies have to be developed and applied for a Sustainable Product Development and Life Cycle Engineering to fulfill the needs of humankind, protecting public health, welfare, and environment. The 8th Global Conference on Sustainable Manufacturing brings together some of the world’s leading experts to present a scientific conference in Abu Dhabi, one of the world’s fastest growing economies and a global leader in the development of sustainable technologies. The conference will focus on 7 areas: Value adding by sustainable manufacturing in the UAE Potentials of renewables Education for sustainability engineering Green supply chain and transportation Microelectronics and resource efficiency Technology driven startups Sustainable products and manufacturing processes

Download or read book Sustainable Manufacturing written by Kapil Gupta and published by Elsevier. This book was released on 2021-03-30 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Manufacturing examines the overall sustainability of a wide range of manufacturing processes and industrial systems. With chapters addressing machining, casting, additive and gear manufacturing processes; and hot topics such as remanufacturing, life cycle engineering, and recycling, this book is the most complete guide to this topic available. Drawing on experts in both academia and industry, coverage addresses theoretical developments and practical improvements from research and innovations. This unique book will advise readers on how to achieve sustainable manufacturing processes and systems, and further the clean and safe environment. This handbook is a part of the four volume set entitled Handbooks in Advanced Manufacturing. The other three address Advanced Machining and Finishing, Advanced Welding and Deforming, and Additive Manufacturing. Provides basic to advanced level information on various aspects of sustainable manufacturing Presents the strategies and techniques to achieve sustainability in numerous areas of manufacturing and industrial engineering such as environmentally benign machining, sustainable additive manufacturing, remanufacturing and recycling, sustainable supply chain, and life cycle engineering Combines contributions from experts in academia and industry with the latest research and case studies Explains how to attain a clean, green, and safe environment via sustainable manufacturing Presents recent developments and suggests future research directions

Download or read book Sustainable Manufacturing and Remanufacturing Management written by Weidong Li and published by Springer. This book was released on 2018-06-29 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the latest research and applications in the fields of sustainable manufacturing and remanufacturing, as well as process planning and optimization technologies. It introduces innovative algorithms, methodologies, industrial case studies and applications. It focuses on two topics: sustainable manufacturing for machining technologies and remanufacturing of waste electronic equipment, and various methods are covered for each one, including macro process planning, dynamic scheduling, selective disassembly planning and cloud-based disassembly planning. The experimental analysis provided for every method explains the benefits, as well as how they are sustainable for various real-world applications. Further, a theoretical analysis and algorithm design is presented for each, accompanied by the contributors’ relevant research, including: • step-by-step guides; • application scenarios; • relevant literature surveys; • implementation details and case studies; and • critical reviews on the relevant technologies. This book is a valuable resource for researchers in sustainable manufacturing, remanufacturing and product lifecycle management communities, as well as practicing engineers and decision-makers in industry and all those interested in sustainable product development. It is also useful reading material for postgraduates and academics wanting to conduct relevant research, and a reference resource for manufacturing engineers developing innovative tools and methodologies.

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.