Download or read book Glass Construction Manual written by Christian Schittich and published by Walter de Gruyter. This book was released on 2012-12-10 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass offers a wide variety of possible applications for the realization of even the most ambitious designs in architecture, and in the past two decades it has experienced an unparalleled burst of innovation. For planners, this means working constantly with this high-performance material. In compact and appealing form, the completely revised Glass Construction Manual presents the current state of the art on planning and building with glass, from the history through the technical foundations all the way to the most innovative applications. Astonishing perspectives on thermal insulation and solar protection and the addition of thoughtfully selected new practical examples round off this comprehensive reference work.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
Download or read book Materials for Architects and Builders written by Arthur R. Lyons and published by Routledge. This book was released on 2007 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bricks and brickwork -- Blocks and blockwork -- Lime, cement and concrete -- Timber and timber products -- Ferrous and non-ferrous metals -- Bitumen and flat roofing materials -- Glass -- Ceramic materials -- Stone and cast stone -- Plastics -- Glass-fibre reinforced plastics, cement and gypsum -- Plaster and board materials -- Insulating materials -- Energy-saving materials and components -- Recycled and ecological materials -- Sealants, gaskets and adhesives -- Paints, wood stains, varnishes and colour.
Download or read book Building Openings Construction Manual written by Thomas Stark and published by Detail. This book was released on 2016-05-30 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building openings provide light, ventilation and climate control for rooms. At the same time, they are essential functional and design elements of facades. This manual offers solid facts on standards and safety features. It covers materials, construction types and specifics of structural connections, incl. solutions on how to deal with existing older windows and issues of ventilation, the use of solar energy and ecological sustainability.
Download or read book AGC Glass Building written by Philippe Samyn and published by Lannoo Publishers. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A monograph documenting one of the biggest passive energy buildings in Belgium. It retraces the history of this project and its construction in Louvain-la-Neuve, Belgium. The sketches, drawings, photos and explanations show all the aspects of the realisation of an office supporting ecological sustainability.
Download or read book Structural Use of Glass written by Matthias Haldimann and published by IABSE. This book was released on 2008 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to redress this issue by providing an overview of the recent developments in this field thereby providing a basis for the understanding of the structural performance and design of glass in buildings. Each chapter draws on the latest developments in practice and research and contains contributions from various international glass experts. The mix of general and specialist content ranging from rules of thumb to fracture mechanics and novel applications to post-breakage performance make this book useful to practitioners and researchers. Furthermore, the text is supplemented by tables of the major codes of practice and by an extensive list of references.
Download or read book Glass Structures written by Jan Wurm and published by Springer Science & Business Media. This book was released on 2007 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flat glass opens up more possibilities for the planner than virtually any other material. Because of the technological complexity of using it, however, no specific structural forms have been developed for glass supporting frameworks as they have been for wood, concrete, and steel. This book is thus the first to present a coherent guide to the planning and design of glass supporting frameworks. The focus is on the pressure-resistant, flat supporting element as a basic building block for broad supporting structures. The spatial and constructive forms of multifunctional, self-supporting glass envelopes are vividly illustrated and systematically explained. The constructions presented exhibit new aesthetic qualities, based not on the dictum of "dematerialization" but on the poetry of gleaming and transparent planes. They ring in a new chapter in the history of glass architecture.
Download or read book Concrete Repair to EN 1504 written by Michael Raupach and published by CRC Press. This book was released on 2014-05-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Construction Sector Is Increasingly Focused On RepairAs concrete structures are maintained longer for both environmental and financial reasons, the diagnosis, design, and selection of products, and repair work all depend on the individual condition of the buildings and require specialist knowledge from everyone involved. Concrete Repair to EN 1
Download or read book Building Materials written by S.K. Duggal and published by Routledge. This book was released on 2017-12-04 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text on building materials includes discussion of structural clay products, rocks and stones, wood, materials for making concrete, ferrous and non-ferrous metals, and miscellaneous materials.
Download or read book Degradation of Implant Materials written by Noam Eliaz and published by Springer Science & Business Media. This book was released on 2012-08-21 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current understanding of the mechanical, chemical and biological processes that are responsible for the degradation of a variety of implant materials. All 18 chapters will be written by internationally renowned experts to address both fundamental and practical aspects of research into the field. Different failure mechanisms such as corrosion, fatigue, and wear will be reviewed, together with experimental techniques for monitoring them, either in vitro or in vivo. Procedures for implant retrieval and analysis will be presented. A variety of biomaterials (stainless steels, titanium and its alloys, nitinol, magnesium alloys, polyethylene, biodegradable polymers, silicone gel, hydrogels, calcium phosphates) and medical devices (orthopedic and dental implants, stents, heart valves, breast implants) will be analyzed in detail. The book will serve as a broad reference source for graduate students and researchers studying biomedicine, corrosion, surface science, and electrochemistry.
Download or read book Loft Conversion Project Guide written by Corporate Products Association and published by Riba Publishing. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to loft conversions that provides building control officers, builders and DIY enthusiasts with guidance on achieving compliance with the Building Regulations. Starting with chapters on the existing structure and proposed structure, it is divided into chapters on the main considerations for a loft conversion. The Loft Conversion Project Guide is an easy-to-use guide to loft conversions and provides building control, builders and DIY enthusiasts with up-to-date and reliable guidance on achieving compliance with the Building Regulations. The need for industry to develop a project guide for loft conversions was identified in the Future of Building Control Implementation Plan, published by Communities and Local Government (CLG) in 2009. As a direct outcome of the Plan, the Construction Products Association has developed this guide, which is supported by the CLG, in collaboration with the National House Building Council, Local Authority Building Control, Energy Saving Trust, Association of Consultant Approved Inspectors and the Federation of Master Builders. It brings together solutions offered in the Approved Documents and third tier guidance, such as industry literature, in one concise and fully illustrated guide. Starting with chapters on the existing structure and proposed structure, the guide is then divided into chapters on the main considerations for a loft conversion, covering topics such as fire safety, windows and doors, and insulation. This is an essential read for anyone looking for a guide which simplifies the building regulations process and offers solutions, where applicable, to achieve minimum, good and best standards for construction.
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book Architects Data written by Ernst Neufert and published by Wiley-Blackwell. This book was released on 1991-01-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an essential aid in the initial design and planning of a project. The relevant building type is located by a comprehensive index and cross reference system, a condensed commentary covers user requireements, planning criteria, basic dimensions and other considerations of function, siting aspect etc. A system of references based on an extensive bibliography supports the text. In every section plans, sections, site layouts, design details and graphs illustrated key aspects of a building type's design. Most illustrations are dimensioned or scaled - the metric system of measurement is used throughout, and the equivalent in feet/inches can easily be read either off a graphic scale on the page or from the built-in conversion table. The illustrations are international in origin and include both well know and less famous designers. Architects Data is primarily a handbook of building types rather than of construction techniques and details. However its treatment of components (such as doors and windows) and of spaces for building services is extremely thorough, since consideration of this data is an essential element of the planning process. The opening pages of basic data on man and his buildings cover critical subjects such as scale, drawing practice, noise, light and space for the same reason. Particular attention has also been paid to the implications of energy conservation, means of escape from fire and the needs of the elderly and the disabled.
Download or read book Advances in Air Conditioning and Refrigeration written by Maddali Ramgopal and published by Springer Nature. This book was released on 2020-10-10 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed papers from the International Conference on Recent Advancements in Air Conditioning and Refrigeration (RAAR) 2019. The focus is on current research in a very topical area of HVAC technology, which has wide-ranging applications. The topics covered include modern air conditioning and refrigeration practices, environment-friendly refrigerants, high-performance components, computer-assisted design, manufacture, operations and data management, energy-efficient buildings, and application of solar energy to heating and air conditioning. This book is useful for researchers and industry professionals working in the field of heating, air conditioning and refrigeration.
Download or read book Externally Bonded FRP Reinforcement for RC Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2001-01-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 1996, the then CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. The Task Group consists of about 60 members, representing most European universities, research institutes and industrial companies working in the field of advanced composite reinforcement for concrete structures, as well as corresponding members from Canada, Japan and USA. Meetings are held twice a year and on the research level its work is supported by the EU TMR (European Union Training and Mobility of Researchers) Network "ConFibreCrete”. The work of fib TG 9.3 is performed by five working parties (WP): Material Testing and Characterization (MT&C) Reinforced Concrete (RC) Prestressed Concrete (PC) Externally Bonded Reinforcement (EBR) Marketing and Applications (M&A) This technical report constitutes the work conducted as of to date by the EBR party. This bulletin gives detailed design guidelines on the use of FRP EBR, the practical execution and the quality control, based on the current expertise and state-of-the-art knowledge of the task group members. It is regarded as a progress report since it is not the aim of this report to cover all aspects of RC strengthening with composites. Instead, it focuses on those aspects that form the majority of the design problems. several of the topics presented are subject of ongoing research and development, and the details of some modelling approaches may be subject to future revisions. as knowledge in this field is advancing rapidly, the work of the EBR WP will continue. Inspite of this limit in scope, considerable effort has been made to present a bulletin that is today’s state-of-art in the area of strengthening of concrete structures by means of externally bonded FRP reinforcement.
Download or read book Ceramic Materials written by Philippe Boch and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily an introduction to the vast family of ceramic materials. The first part is devoted to the basics of ceramics and processes: raw materials, powders synthesis, shaping and sintering. It discusses traditional ceramics as well as “technical” ceramics – both oxide and non-oxide – which have multiple developments. The second part focuses on properties and applications, and discusses both structural and functional ceramics, including bioceramics. The fields of abrasion, cutting and tribology illustrate the importance of mechanical properties. It also deals with the questions/answers of a ceramicist regarding electronuclear technology. As chemistry is an essential discipline for ceramicists, the book shows, in particular, what soft chemistry can contribute as a result of sol-gel methods.
Download or read book Cradle to Cradle written by William McDonough and published by North Point Press. This book was released on 2010-03-01 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: A manifesto for a radically different philosophy and practice of manufacture and environmentalism "Reduce, reuse, recycle" urge environmentalists; in other words, do more with less in order to minimize damage. But as this provocative, visionary book argues, this approach perpetuates a one-way, "cradle to grave" manufacturing model that dates to the Industrial Revolution and casts off as much as 90 percent of the materials it uses as waste, much of it toxic. Why not challenge the notion that human industry must inevitably damage the natural world? In fact, why not take nature itself as our model? A tree produces thousands of blossoms in order to create another tree, yet we do not consider its abundance wasteful but safe, beautiful, and highly effective; hence, "waste equals food" is the first principle the book sets forth. Products might be designed so that, after their useful life, they provide nourishment for something new-either as "biological nutrients" that safely re-enter the environment or as "technical nutrients" that circulate within closed-loop industrial cycles, without being "downcycled" into low-grade uses (as most "recyclables" now are). Elaborating their principles from experience (re)designing everything from carpeting to corporate campuses, William McDonough and Michael Braungart make an exciting and viable case for change.
