Download or read book Glass in Building Curved Glass Requirements for Curved Tempered and Curved Laminated Safety Glass written by British Standards Institute Staff and published by . This book was released on 1914-09-30 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass, Construction materials, Curved, Buildings, Quality control
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2019-08-28 with total page 1204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components.
Download or read book Challenging Glass 3 written by IOS Press and published by IOS Press. This book was released on 2012-06-21 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are two things everybody knows about glass: it is transparent, and it breaks! These are also the properties that constitute the challenge of glass as an architectural and structural material. This book presents papers from the third Challenging Glass Conference (CGC3), held at the Technical University (TU) Delft, the Netherlands, in June 2012. The conference brings together glass engineering, research and design specialists. Papers are grouped under seven topic headings: project and case studies; joints, fixings and adhesives; strength, stability and safety (a category which includes a quarter of all the papers presented at the conference); laminates and composite design; curved and bended glass; architectural design and lighting and finally, glass in facades. Glass remains one of the most exciting materials available to designers and architects today. This book will be of interest to all those involved in working with glass in an architectural and structural context.
Download or read book Glass in Building Curved Glass Quality Requirements written by British Standards Institute Staff and published by . This book was released on 1912-12-31 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass, Construction materials, Curved, Buildings, Quality control
Download or read book Glass Structures written by Jan Wurm and published by Walter de Gruyter. This book was released on 2007-06-22 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flat glass opens up more possibilities for the planner than virtually any other material. Because of the technological complexity of using it, however, no specific structural forms have been developed for glass supporting frameworks as they have been for wood, concrete, and steel. This book is thus the first to present a coherent guide to the planning and design of glass supporting frameworks. The focus is on the pressure-resistant, flat supporting element as a basic building block for broad supporting structures. The spatial and constructive forms of multifunctional, self-supporting glass envelopes are vividly illustrated and systematically explained. The constructions presented exhibit new aesthetic qualities, based not on the dictum of "dematerialization” but on the poetry of gleaming and transparent planes. They ring in a new chapter in the history of glass architecture.
Download or read book Metric Handbook written by Pamela Buxton and published by Taylor & Francis. This book was released on 2021-11-25 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Metric Handbook is the major handbook of planning and design data for architects and architecture students, with over 100,000 copies sold to successive generations of architects and designers. It remains the ideal starting point for any project and belongs in every design office. The seventh edition references the latest regulations and construction standards and includes new chapters on data centres and logistics facilities alongside basic design data for all the major building types. For each building type, the book gives the basic design requirements and all the principal dimensional data, and succinct guidance on how to use the information and what regulations the designer needs to be aware of. As well as buildings, the Metric Handbook deals with broader aspects of design such as materials, acoustics, and lighting, and general design data on human dimensions and space requirements. The Metric Handbook is the unique reference for solving everyday planning problems.
Download or read book Modern Construction Handbook written by Andrew Watts and published by Birkhäuser. This book was released on 2022-11-21 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: New edition of the popular handbook The Modern Construction Handbook has become a classic of advanced construction literature, not least due to its regular revisions and clear structure with chapters titled “Material”, “Wall”, “Roof”, “Structure”, “Environment,” and “Applications”. Tried and tested component details, examples focusing on sustainability and energy consumption, and an update on finite element analysis (FEA) and computational fluid dynamics (CFD) introduced in the last edition set new standards for this handbook which serves as a foundational textbook in many architecture courses. As a primer Handbook to building design, it is a starting point for the more advanced books Modern Construction Envelopes, Modern Construction Case Studies, Modern Environmental Design and Modern Structural Design by Andrew Watts. Relevant details and examples for studies The most important aspects of building design covered in six chapters Project-neutral drawings Andrew Watts an architect and engineer and the author of the Modern Construction series of textbooks. He specialises in the architectural and engineering design of large-scale buildings of complex form. Andrew is a founding director of Newtecnic. He is a Fellow of three UK engineering institutions in recognition of his engineering-based designs; the Institution of Civil Engineers; the Institution of Engineering Designers; the Institution of Engineering and Technology. Andrew holds charterships in the UK for architecture and engineering from the Royal Institute of British Architects and the Institution of Engineering Designers. In the US, he holds an ASCE membership.
Download or read book Innovative Design and Construction written by Stefan Behling and published by Walter de Gruyter. This book was released on 2013-01-07 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: How is innovative architecture created? How can efficient synergies between planners and manufacturers be achieved? And how does an enterprise such as seele, with its proven high-level qualifications in the area of steel and glass, respond to planners' design ideas? These are just some of the questions answered in Innovative Design + Construction, the new publication in the DETAILdevelopment series. Using prestigious international projects as examples, the book explains the working philosophy and approach of the seele company, which stands for innovation in construction and customised solutions using the materials of glass, steel, aluminium and membranes like few other companies.
Download or read book GB 15763 3 2009 Translated English of Chinese Standard GB15763 3 2009 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-08-15 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part specifies the terms and definitions, classification, material, requirements, test methods and inspection rules of laminated glass in building. This part is applicable to the laminated glass in building.
Download or read book Construction Materials written by Caleb Hornbostel and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exhaustive list of materials used in construction and architecture. Inforamation on each category includes history and manufacture, the physical and chemical properties, and the conditions of use. Although an American publication all measurements in the book include metric equivalients.
Download or read book Glass Construction Manual written by Christian Schittich and published by Walter de Gruyter. This book was released on 2012-12-10 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass offers a wide variety of possible applications for the realization of even the most ambitious designs in architecture, and in the past two decades it has experienced an unparalleled burst of innovation. For planners, this means working constantly with this high-performance material. In compact and appealing form, the completely revised Glass Construction Manual presents the current state of the art on planning and building with glass, from the history through the technical foundations all the way to the most innovative applications. Astonishing perspectives on thermal insulation and solar protection and the addition of thoughtfully selected new practical examples round off this comprehensive reference work.
Download or read book COST Action TU0905 Mid term Conference on Structural Glass written by Jan Belis and published by CRC Press. This book was released on 2013-04-05 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of glass as a structural material may seem surprising initially, yet pioneering glass structures were first built two decades ago already. Ever since, Structural Glass has been developing at a very high pace thanks to very intensive scientific and industrial research and new technological developments. Right at the heart of these rapidly evolving developments, the European COST Action TU0905 'Structural Glass – Novel Design Methods and Next Generation Products' is active. With its main goals of unifying, harmonizing and boosting the ongoing developments in structural glass research, COST Action TU0905 frequently organizes international expert meetings and Training Schools, and supports scientific research missions. This proceedings volume of the COST Action TU0905 Mid-term Conference on Structural Glass offers a great insight into the latest developments in Structural Glass by means of more than 60 peer-reviewed papers by nearly 140 authors. Contributions cover all major topics in the field, ranging from in-depth material investigations to full glass structures and facades. As such, it represents an appealing work on this very young and dynamic field, and is intended for a global readership of researchers and practitioners, including structural and civil engineers, architects, material scientists, building consultants, contractors, material suppliers and product manufacturers, as well as other professionals involved in the design and realization of structural glass projects. The COST Action TU0905 Mid-Term Conference was held as a unique event, strongly embedded in COST Action TU0905 'Structural Glass – Novel Design Methods and Next Generation Products'. As such, it reflects the Action’s strong position as probably the largest Structural Glass research network worldwide, and disseminates the ultimate COST philosophy: true cooperation in Science and Technology.
Download or read book Construction Materials written by Manuel Bustillo Revuelta and published by Springer Nature. This book was released on 2021-03-02 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Materials is a comprehensive textbook covering all raw materials and products related to the construction processes, and not only those applied to building structures. The book is organized to help readers achieve competent knowledge about construction materials. At the beginning of the book the author offers the general concepts, definitions, and standards adopted worldwide for these materials to be used along the book. The central part of the text covers the primary construction materials required to manufacture concrete and mortars, the most relevant construction materials in the last century. Expressly, concrete and mortar are treated in detail in dedicated chapters per component. In addition, the author addresses other relevant materials in construction such as ceramic materials, metals and alloys, bituminous materials, and geosynthetic materials. Finally, since the construction industry is one of the largest single waste producing sector in the world, the last chapter outlines the main types and characteristics of construction and demolition waste (e.g. recycled aggregates). The book appeals to students but also professionals interested in construction materials and construction and civil engineering.
Download or read book Advances in Fusion and Processing of Glass III written by James R. Varner and published by John Wiley & Sons. This book was released on 2012-04-11 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass continues to be a material of great scientific and technological interest; however, the economic pressures on the glass industry, the emphasis on global markets, and the worldwide attention to energy and environmental conservation continue to increase. Forty-seven papers offer new solutions to the challenges of glass manufacturing, particularly as they pertain to melting and forming. Proceedings of the 7th International Conference on Advances in Fusion and Processing of Glass, July 27-31, 2003, Rochester, New York; Ceramic Transactions, Volume 141.
Download or read book Highway Safety Literature written by United States. National Highway Safety Bureau and published by . This book was released on 1969 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Highway Safety Literature written by and published by . This book was released on 1969 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interior Graphic Standards written by Corky Binggeli and published by John Wiley & Sons. This book was released on 2011-11-29 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new student edition of the definitive reference on architectural interiors Interior Graphic Standards, Student Edition is a carefully edited treatment of the authoritative Interior Graphic Standards Professional Edition. Designed and organized to give students the specific information they require, this is an essential reference for anyone studying architectural interiors. New topics include accessible design basics, computing technologies, fire-resistive construction, fire protection systems, security and communications systems, interior equipment, evidence-based design, and climate considerations. In addition, this second Student Edition offers more material on residential design, is packed with more than 1,300 informative illustrations, and includes the latest coverage for students to find real help understanding the critical material they need for the core classes required by all curriculums. Additional revisions to this edition include: Updated coverage of sustainable design and materials and ADA Standards for Accessible Design Companion website featuring online resources for students Expert advice and details for designing interior project types including commercial, residential, healthcare, retail, hospitality, educational, performance, and museum spaces, as well as existing building interiors Like Interior Graphic Standards Professional Edition, this student edition's Second Edition provides essential specification and detailing information for working inside the structural shell, covering interior partitions and floor systems, updated lighting practices, furnishings, equipment, and wall, floor, and ceiling finishes.
