Download or read book Glass Fibre Directory and Databook written by Trevor Starr and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass-Fibre Directory and Databook is a comprehensive listing of all commercially available glass-fibres, whether used for reinforcement, insulation or filtration. Full details - addresses, telephone and facsimile numbers - of the respective manufacturers, their affiliates, licensees and subsidiaries, agents and distributors are provided, together with tabulated specifications of the materials each offers. The volume is therefore an invaluable source of information for all those concerned in any way with glass-fibres in both the industrial and academic worlds. It enables professionals such as design engineers, consultants, purchase managers and specifiers to make an optimum choice from the wide range of materials now available so that the properties are more effectively tailored to both the application and the performance specification required.
Download or read book Carbon and High Performance Fibres Directory and Databook written by Trevor Starr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: PURPOSE Since the publication of the previous, Fifth Edition of this volume in 1991, the 'advanced' sector of the world-wide composites industry in particular, has seen many company changes in reorganisation, realignment and ownership. These changes have affected the raw material suppliers as well as those moulding the finished product. Changes in the demands of the aerospace, defence and allied industries have largely been the cause. That situation has been particularly true for those manufacturing and distributing reinforcement fibres and fabrics, necessitating this comprehensive Sixth Edition revision. However publication is also timely, because a major and important consequence is the better consideration now being given by the 'commercial' market sector, to the use - and advantages - of some of the carbon, aramid and other high-performance reinforcements, described within these pages. Although supplying at a much lower finished component cost than applies for the aerospace and defence markets, the total tonnage output answering the typically lower-performance requirements of the 'commercial' sector, is higher by many factors. Overall therefore, the summation of output tonnage and price, will continue to favour the latter. Nevertheless this 'commercial' market sector must, albeit slowly, ultimately benefit to a marked degree from an increasing technology spin-off, promoted to an extent somewhat earlier than might otherwise have been expected, by the noted changes in market place demand.
Download or read book Glass Fibre Databook written by Trevor F. Starr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing of Polymer Composites written by B. Tomas Astrom and published by Routledge. This book was released on 2018-04-27 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential application areas for polymer composites are vast. While techniques and methodologies for composites design are relatively well established, the knowledge and understanding of post-design issues lag far behind. This leads to designs and eventually composites with disappointing properties and unnecessarily high cost, thus impeding a wider industrial acceptance of polymer composites. Manufacturing of Polymer Composites completely covers pre- and post-design issues. While the book enables students to become fully comfortable with composites as a possible materials choice, it also provides sufficient knowledge about manufacturing-related issues to permit them to avoid common pitfalls and unmanufacturable designs. The book is a fully comprehensive text covering all commercially significant materials and manufacturing techniques while at the same time discussing areas of research and development that are nearing commercial reality.
Download or read book Thermoplastics written by D.P. Bashford and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall aim of this book is to aid the process of sourcing and selecting appropriate thermoplastic polymers. There are now a wide diversity of thermoplastics offered for commercial uses. At one end of the range are the high-volume commodity materials for short life consumer applications. Whereas at the other end are the high value engineering materials; with significant levels of mechanical, physical and electrical performance. Within this publication, the generic groups of thermoplastics can be identified, along with their respective attributes and limitations. All thermoplastics are available in different grades. The constituents selected to form a grade are chosen to modify aspects of material behaviour, both during processing and in the final moulded form. The directory addresses materials which can be obtained in granular, powder or paste form for subsequent processing. Information is not provided directly on semi-finished product forms, such as films, fibres, sheet or profiles, other than when inferred from the processing descriptions of specified grades. The directory covers virgin or compounded material. It does not specifically address reclaimed or recycled grades. Data is provided for the mechanical and physical properties of moulded grades as processed by the route intended by the primary manufacturer (M) or compounder (C). Material grades can be obtained from a number of sources; either the original polymer manufacturer or a recognised compounder who produces a range of grades.
Download or read book Advanced Inorganic Fibers written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2011-04-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: F. T. Wallenberger This book serves as an introduction to advanced inorganic fibers and aims to support fundamental research, assist applied scientists and designers in industry, and facilitate materials science instruction in universities and colleges. Its three main sections deal with fibers which are derived from the vapor phase such as single crystal silicon whiskers or carbon nanotubes, from the liquid phase such as advanced glass and single crystal oxide fibers, and from solid precursor fibers such as carbon and ceramic fibers. Contents FIBERS FROM THE VAPOR, LIQUID AND SOLID PHASE 1.1 The most important phase isthe liquid phase 1.2 Afiber by any name isstill afiber 1.3 Biographic sketches ofthe authors 1.4 Acknowledgments CHAPTER 1 FIBERS FROM THE VAPOR, LIQUID AND SOLID PHASE F. T. Wallenberger The book describes advanced inorganic fibers, focuses on principles and concepts, analyzes experimental and commercial processes, and relates process variables to structures, structures tofiber properties and fiber properties to end-use performance. In principle, there are discontinuous or inherently short, and continuous or potentially endless, fibers. Short fibers range from asbestos fibers, which were described as early as 300 BC to carbon nanotubes which were discovered in 1991 [1] and have been fully described in 1999 [2].
Download or read book Fiberglass and Glass Technology written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2009-11-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiberglass and Glass Technology: Energy-Friendly Compositions and Applications provides a detailed overview of fiber, float and container glass technology with special emphasis on energy- and environmentally-friendly compositions, applications and manufacturing practices which have recently become available and continue to emerge. Energy-friendly compositions are variants of incumbent fiberglass and glass compositions that are obtained by the reformulation of incumbent compositions to reduce the viscosity and thereby the energy demand. Environmentally-friendly compositions are variants of incumbent fiber, float and container glass compositions that are obtained by the reformulation of incumbent compositions to reduce environmentally harmful emissions from their melts. Energy- and environmentally-friendly compositions are expected to become a key factor in the future for the fiberglass and glass industries. This book consists of two complementary sections: continuous glass fiber technology and soda-lime-silica glass technology. Important topics covered include: o Commercial and experimental compositions and products o Design of energy- and environmentally-friendly compositions o Emerging glass melting technologies including plasma melting o Fiberglass composite design and engineering o Emerging fiberglass applications and markets Fiberglass and Glass Technology: Energy-Friendly Compositions and Applications is written for researchers and engineers seeking a modern understanding of glass technology and the development of future products that are more energy- and environmentally-friendly than current products.
Download or read book Directories in Print 26 V3 Supplement written by and published by . This book was released on 2007-02 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Care and Repair of Advanced Composites written by Keith B Armstrong and published by SAE International. This book was released on 2005-06-22 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition has been extensively updated to keep pace with the growing use of composite materials in commercial aviation. A worldwide reference for repair technicians and design engineers, the book is an outgrowth of the course syllabus that was developed by the Training Task Group of SAE's Commercial Aircraft Composite Repair Committee (CACRC) and published as SAE AIR 4938, Composite and Bonded Structure Technician Specialist Training Document. Topics new to this edition include: Nondestructive Inspection (NDI) Methods Fasteners for Composite Materials A Method for the Surface Preparation of Metals Prior to Adhesive Bonding Repair Design Although this book has been written primarily for use in aircraft repair other applications including marine and automotive are also covered.
Download or read book Crain s Market Data Book and Directory of Class Trade and Technical Publications written by and published by . This book was released on 1920 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Manufacturing Processes written by Renu Kumari and published by Springer Nature. This book was released on 2021-08-11 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the National Conference on Research and Developments in Material Processing, Modelling and Characterization (RDMPMC 2020). It covers the recent advances in manufacturing processes. The book explains various manufacturing process technologies based on surface modification, welding, mechanical deformation, and heat treatment. It also covers the topics such as microstructural characterization and properties evaluation, corrosion, and tribology. The book will be useful to researchers, students and professionals working in areas related to materials processing and characterization.
Download or read book Polymeric Nanocomposites with Carbonaceous Nanofillers for Aerospace Applications written by Ayesha Kausar and published by Woodhead Publishing. This book was released on 2022-10-06 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Nanocomposites with Carbonaceous Nanofillers for Aerospace Applications offers a comprehensive paperback on the aerospace relevance of polymer/carbonaceous nanofiller-based nanocomposite. This manuscript summarizes all specific information on the design, fabrication and application areas of aerospace industry that employ polymer/carbonaceous nanofiller-based nanocomposites. In addition, it points to the potential of aeronautical nanocomposites towards lightning strike, radiation shielding, anti-corrosion, electronic/optical features, thermal management, antistatic application, self-healing aptitude, and green nanocomposites. The modeling of mechanical and essential properties of aerospace nanocomposites is also discussed, along with challenges and future forecasts of polymer/carbonaceous nanofiller nanocomposites. - Focuses on essential aerospace composites, carbonaceous nanofillers, and ensuing polymer/carbonaceous nanofiller-based nanocomposites - Explores indispensable properties of aeronautical nanocomposites, modeling of physical properties, and combined influence of carbonaceous nanofillers and carbon fibers on space material properties - Includes up-to-date technical applications of polymer/carbonaceous nanofiller-based nanocomposites in design, mechanical robustness, heat resistance, non-flammability, anti-corrosion, radiation shielding, lightning strike prevention, electronic/optical features, antistatic application, self-healing, thermal management, and green nanocomposites for aeronautical relevance
Download or read book Polymers written by Bryan Ellis and published by CRC Press. This book was released on 2008-10-29 with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reliable source for scientific and commercial information on over 1,000 polymers, this revised and updated edition features 25 percent new material, including 50 entirely new entries that reflect advances in such areas as conducting polymers, hydrogels, nano-polymers, and biomaterials. The second edition also comes with unlimited access to a complete, fully searchable web version of the reference. Powerful retrieval software allows users to customize their searches and refine results. Each entry includes trade names, properties, manufacturing processes, commercial applications, supplier details, references, and links to constituent monomers.
Download or read book Crain s Market Data Book and Directory written by and published by . This book was released on 1920 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Cumulative Book Index written by and published by . This book was released on 1998 with total page 2348 pages. Available in PDF, EPUB and Kindle. Book excerpt: A world list of books in the English language.
Download or read book Directories in Print written by and published by . This book was released on 2011 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Market Data Book written by and published by . This book was released on 1926 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
