Download or read book Geothermal Well Drilling Fluid Technology written by Kenneth J. Liles and published by . This book was released on 1976 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Renewable Energy Systems written by Martin Kaltschmitt and published by Springer. This book was released on 2012-12-06 with total page 1898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity is facing a steadily diminishing supply of fossil fuels, causing researchers, policy makers, and the population as a whole to turn increasingly to alternative and especially renewable sources of energy to make up this deficit. Gathering over 80 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technologies, Renewable Energy Systems provides an authoritative introduction to a wide variety of renewable energy sources. State-of-the-art coverage includes geothermal power stations, ocean energy, renewable energy from biomass, waste to energy, and wind power. This comprehensive, two-volume work provides an excellent introduction for those entering these fields, as well as new insights for advanced researchers, industry experts, and decision makers.
Download or read book Geothermal Reservoir Engineering written by Malcolm Alister Grant and published by Academic Press. This book was released on 2011-04-01 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: As nations alike struggle to diversify and secure their power portfolios, geothermal energy, the essentially limitless heat emanating from the earth itself, is being harnessed at an unprecedented rate. For the last 25 years, engineers around the world tasked with taming this raw power have used Geothermal Reservoir Engineering as both a training manual and a professional reference. This long-awaited second edition of Geothermal Reservoir Engineering is a practical guide to the issues and tasks geothermal engineers encounter in the course of their daily jobs. The book focuses particularly on the evaluation of potential sites and provides detailed guidance on the field management of the power plants built on them. With over 100 pages of new material informed by the breakthroughs of the last 25 years, Geothermal Reservoir Engineering remains the only training tool and professional reference dedicated to advising both new and experienced geothermal reservoir engineers. - The only resource available to help geothermal professionals make smart choices in field site selection and reservoir management - Practical focus eschews theory and basics- getting right to the heart of the important issues encountered in the field - Updates include coverage of advances in EGS (enhanced geothermal systems), well stimulation, well modeling, extensive field histories and preparing data for reservoir simulation - Case studies provide cautionary tales and best practices that can only be imparted by a seasoned expert
Download or read book Underbalanced Drilling Limits and Extremes written by Bill Rehm and published by Elsevier. This book was released on 2013-11-25 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present crude oil and natural gas reservoirs around the world have depleted conventional production levels. To continue enhancing productivity for the remaining mature reservoirs, drilling decision-makers could no longer rely on traditional balanced or overbalanced methods of drilling. Derived from conventional air drilling, underbalanced drilling is increasingly necessary to meet today’s energy and drilling needs. While more costly and extreme, underbalanced drilling can minimize pressure within the formation, increase drilling rate of penetration, reduce formation damage and lost circulation, making mature reservoirs once again viable and more productive. To further explain this essential drilling procedure, Bill Rehm, an experienced legend in drilling along with his co-editors, has compiled a handbook perfect for the drilling supervisor. Underbalanced Drilling: Limits and Extremes, written under the auspices of the IADC Technical Publications Committee, contain many great features and contributions including: Real case studies shared by major service companies to give the reader guidelines on what might happen in actual operations Questions and answers at the end of the chapters for upcoming engineers to test their knowledge Common procedures, typical and special equipment involved, and most importantly, the limits and challenges that still surround this technology
Download or read book Composition and Properties of Drilling and Completion Fluids written by Ryen Caenn and published by Gulf Professional Publishing. This book was released on 2011-09-29 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal
Download or read book Lost Circulation written by Alexandre Lavrov and published by Gulf Professional Publishing. This book was released on 2016-03-16 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lost Circulation: Mechanisms and Solutions provides the latest information on a long-existing problem for drilling and cementing engineers that can cause improper drilling conditions, safety risks, and annual losses of millions of wasted dollars for oil and gas companies. While several conferences have convened on the topic, this book is the first reliable reference to provide a well-rounded, unbiased approach on the fundamental causes of lost circulation, how to diagnose it in the well, and how to treat and prevent it in future well planning operations. As today's drilling operations become more complex, and include situations such as sub-salt formations, deepwater wells with losses caused by cooling, and more depleted reservoirs with reduced in-situ stresses, this book provides critical content on the current state of the industry that includes a breakdown of basics on stresses and fractures and how drilling fluids work in the wellbore. The book then covers the more practical issues caused by induced fractures, such as how to understand where the losses are occurring and how to use proven preventative measures such as wellbore strengthening and the effect of base fluid on lost circulation performance. Supported by realistic case studies, this book separates the many myths from the known facts, equipping today's drilling and cementing engineer with a go-to solution for every day well challenges. - Understand the processes, challenges and solutions involved in lost circulation, a critical problem in drilling - Gain a balance between fundamental understanding and practical application through real-world case studies - Succeed in solving lost circulation in today's operations such as wells involving casing drilling, deepwater, and managed pressure drilling
Download or read book Geothermal Power Generation written by Ronald DiPippo and published by Elsevier. This book was released on 2024-10-11 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Power Generation, New Developments and Innovations, Second Edition provides an update to the advanced energy technologies that are urgently required to meet the challenges of economic development, climate change mitigation, and energy security. Edited by respected and leading experts in the field, this book provides a comprehensive overview of the major aspects of geothermal power production. Chapters cover resource discovery, resource characterization, energy conversion systems, design, economic considerations, and a range of fascinating and updated case studies from across the world.Geothermal resources are considered renewable and are currently the only renewable source able to generate baseload electricity while producing very low levels of greenhouse gas emissions, thus playing a key role in future energy needs. - Provides readers with a comprehensive and systematic overview of geothermal power generation - Presents an update to advanced energy technologies that are urgently required to meet the challenges of economic development, climate change mitigation, and energy security - Edited by authorities in the field and contributed to by global experts in their areas - Supports sustainability and the United Nations Sustainable Development Goals (UN SDGs) 7, 9, 11 and 13
Download or read book Substitution of Phosphate Slime for Bentonite in Geothermal Well Drilling Fluids written by Alan H. Goode and published by . This book was released on 1975 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geothermal Power Plants written by Ronald DiPippo and published by Elsevier. This book was released on 2011-04-08 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ron DiPippo, Professor Emeritus at the University of Massachusetts Dartmouth, is a world-regarded geothermal expert. This single resource covers all aspects of the utilization of geothermal energy for power generation from fundamental scientific and engineering principles. The thermodynamic basis for the design of geothermal power plants is at the heart of the book and readers are clearly guided on the process of designing and analysing the key types of geothermal energy conversion systems. Its practical emphasis is enhanced by the use of case studies from real plants that increase the reader's understanding of geothermal energy conversion and provide a unique compilation of hard-to-obtain data and experience. An important new chapter covers Environmental Impact and Abatement Technologies, including gaseous and solid emissions; water, noise and thermal pollutions; land usage; disturbance of natural hydrothermal manifestations, habitats and vegetation; minimisation of CO2 emissions and environmental impact assessment.The book is illustrated with over 240 photographs and drawings. Nine chapters include practice problems, with solutions, which enable the book to be used as a course text. Also includes a definitive worldwide compilation of every geothermal power plant that has operated, unit by unit, plus a concise primer on the applicable thermodynamics.* Engineering principles are at the heart of the book, with complete coverage of the thermodynamic basis for the design of geothermal power systems* Practical applications are backed up by an extensive selection of case studies that show how geothermal energy conversion systems have been designed, applied and exploited in practice* World renowned geothermal expert DiPippo has including a new chapter on Environmental Impact and Abatement Technology in this new edition
Download or read book Information Circular written by and published by . This book was released on 1976 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gemini Surfactants written by Raoul Zana and published by CRC Press. This book was released on 2003-10-07 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generating much interest in both academic and scientific circles, Gemini Surfactants gathers the most up-to-date research in gemini surfactantproduction and demonstrates how their propertiesand performance can revolutionize the current industrial application of these surfactants. It surveys the state of special gemini surfactants, including nonionic, zwitterionic, fluorinated, and amino-acid-based surfactants. Gemini Surfactants considers the synthesis, phase behavior, and rheology of gemini and related surfactants and clarifies the adsorption and surface tension behavior of gemini surfactants at air–water, oil–water, and solid–water interfaces. The book also details the physicochemical properties and microstructure of aqueous micellar solutions of gemini surfactants and describes mixed micellization between gemini surfactants and conventional surfactants.
Download or read book Well Cementing written by E.B. Nelson and published by Newnes. This book was released on 1990-09-24 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cementing is arguably the most important operation performed on a well. Well cementing technology is an amalgam of many interdependent scientific and engineering disciplines which are essential to achieve the primary goal of well cementing - zonal isolation. This textbook is a comprehensive and up-to-date reference concerning the application of these disciplines to cementing a well.``Well Cementing'' is envisioned as an upper-level university book, as well as a reference for practicing engineers and scientists. The first section of the book illustrates how the quality of the hydraulic seal provided by the cement sheath can affect well performance. The second section concentrates on the design phase of a cementing treatment, and various aspects of cement job execution are covered in the third section. The fourth section addresses cement job evaluation. The text is supported by many tables and figures, an extensive bibliography and an index. There are also chapters devoted to subjects which are currently of particular interest to the industry, including the prevention of annular gas migration, foamed cements, and cementing horizontal wellbores. The chemistry associated with well cementing is presented in detail.Most of the contributors to this volume are employees of Dowell Schlumberger, one of the leading companies in this field.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Research Abstracts written by and published by . This book was released on 1975 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geothermal Energy Update written by and published by . This book was released on 1976 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Super Deep Continental Drilling and Deep Geophysical Sounding written by Karl Fuchs and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles in this volume were selected from a series of reports delivered in the So viet Union at Yaroslavl during the International Seminar "Super-deep drilling and deep geophysical research", which was organized and held in August 1988 by the Ministry of Geology of the USSR, jointly with the Inter-Union Commission on the Lithosphere. One of the most important problems of modem geology, is the state and prospects of further development of deep continental structure investigations, was discussed at the seminar with the participation of 245 scientists and specialists from 19 countries. At the plenary and sectional meetings of the seminar, 83 reports were delivered, discussions on the most interesting problems were organized, the exchange of ideas between the leading scientists a round table took place in discussion. The distinctive feature of the present collection of articles is the wide scope of the investigation of the Earth's crust. The reports elucidate such subjects of world impor tance as (1) achievements in implementation of major scientific programs investi gating deep Earth structure and plans for their further materialization; (2) theoretical problems of carrying out geological-geophysical explorations and drilling operations; and (3) new approaches to the study of the Earth's interior. The results of deep inves tigations of individual countries and organizations are considered, and concrete tech nical elaboration, methods of work execution, etc. are discussed.
Download or read book Low Enthalpy Geothermal Resources for Power Generation written by D. Chandrasekharam and published by CRC Press. This book was released on 2008-07-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many developing countries the exponentially growing electricity demand can be covered by using locally available, sustainable low-enthalpy geothermal resources (80-150 °C). Such low-enthalpy sources can make electricity generation more independent from oil imports or from the over-dependence on hydropower. Until now this huge energy resource has only been used by some developed countries like the USA, Iceland and New Zealand. The reason why low-enthalpy geothermal resources are not used for electricity generation is that there is still a misconception that low-enthalpy thermal fluids are fit only for direct application. The advancement of drilling technology, development of efficient heat exchangers and deployment of high sensitive binary fluids contribute to the useful application of this energy resource on a much wider scale. This book focuses on all aspects of low enthalpy geothermal thermal fluids. It will be an important source book for all scientists working on geothermal energy development. Specifically those involved in research in developing countries rich in such thermal resources, and for agencies involved in bilateral and international cooperation.
