EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Geothermal Reservoir Evaluation Using Well Testing and Analytical Modelling

Download or read book Geothermal Reservoir Evaluation Using Well Testing and Analytical Modelling written by Shakiru Idrissa; UNU Geothermal Training Programme (Iceland) Kajugus and published by . This book was released on 2015 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Geothermal Reservoir Engineering

Download or read book Geothermal Reservoir Engineering written by Malcolm Alister Grant and published by Academic Press. This book was released on 2011-04-01 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: As nations alike struggle to diversify and secure their power portfolios, geothermal energy, the essentially limitless heat emanating from the earth itself, is being harnessed at an unprecedented rate. For the last 25 years, engineers around the world tasked with taming this raw power have used Geothermal Reservoir Engineering as both a training manual and a professional reference. This long-awaited second edition of Geothermal Reservoir Engineering is a practical guide to the issues and tasks geothermal engineers encounter in the course of their daily jobs. The book focuses particularly on the evaluation of potential sites and provides detailed guidance on the field management of the power plants built on them. With over 100 pages of new material informed by the breakthroughs of the last 25 years, Geothermal Reservoir Engineering remains the only training tool and professional reference dedicated to advising both new and experienced geothermal reservoir engineers. - The only resource available to help geothermal professionals make smart choices in field site selection and reservoir management - Practical focus eschews theory and basics- getting right to the heart of the important issues encountered in the field - Updates include coverage of advances in EGS (enhanced geothermal systems), well stimulation, well modeling, extensive field histories and preparing data for reservoir simulation - Case studies provide cautionary tales and best practices that can only be imparted by a seasoned expert

Book Geothermal Well Test Analysis

Download or read book Geothermal Well Test Analysis written by Sadiq J. Zarrouk and published by Academic Press. This book was released on 2019-04-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Well Test Analysis: Fundamentals, Applications and Advanced Techniques provides a comprehensive review of the geothermal pressure transient analysis methodology and its similarities and differences with petroleum and groundwater well test analysis. Also discussed are the different tests undertaken in geothermal wells during completion testing, output/production testing, and the interpretation of data. In addition, the book focuses on pressure transient analysis by numerical simulation and inverse methods, also covering the familiar pressure derivative plot. Finally, non-standard geothermal pressure transient behaviors are analyzed and interpreted by numerical techniques for cases beyond the limit of existing analytical techniques. Provides a guide on the analysis of well test data in geothermal wells, including pressure transient analysis, completion testing and output testing Presents practical information on how to avoid common issues with data collection in geothermal wells Uses SI units, converting existing equations and models found in literature to this unit system instead of oilfield units

Book Analysis of Well Test Data in the Olkaria West Geothermal Field  Kenya

Download or read book Analysis of Well Test Data in the Olkaria West Geothermal Field Kenya written by UNU Geothermal Training Programme (Iceland). and published by . This book was released on 1985 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Thermal Well Test Analysis and Evaluation of Reservoir Characterization Methods Using an Analytical Multi region Composite Reservoir Model

Download or read book Thermal Well Test Analysis and Evaluation of Reservoir Characterization Methods Using an Analytical Multi region Composite Reservoir Model written by Luis Guillermo Acosta and published by . This book was released on 1994 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Geothermal Energy Update

Download or read book Geothermal Energy Update written by and published by . This book was released on 1976 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Well Test Analysis and Reservoir Modeling of Geopressured geothermal Systems  includes Topical Reports on Analyses for

Download or read book Well Test Analysis and Reservoir Modeling of Geopressured geothermal Systems includes Topical Reports on Analyses for written by and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Automated inversion of pressure transient data from the Pleasant Bayou and Gladys McCall geopressured test wells has allowed the resolution of several outstanding questions concerning the two reservoirs. The added accuracy of the interpretation of the various data sets from each well provides convincing evidence that the formation response of each of the reservoirs behaved in an essentially linear fashion throughout its multi-year depletion/recovery test history. The only exception was in the immediate vicinity of the sandface; the skin factor in each of the wells varies during the course of its test history (see Appendices for detailed discussions of the variations and the likely causes of the variations for each well). (a) The six bottomhole pressure transient tests of Pleasant Bayou Well No. 2 over a twelve year period (1980-1992) yield estimates for the permeability-thickness product that are in excellent agreement (kh = 3.665 D-m). Inversion of the 45-day buildup portion of the 1980 RLT yields an estimate of X{sub a} = 869 m as the distance from the well to the nearest boundary. The inversion of the data from the other five tests, of much shorter duration, yield estimates in the range X{sub a} = 427-503 m. The RLT estimate would normally be given much more credence. The failure, repair and resetting of the gauge after the first ten days of the start of the buildup test, however, may have affected the RLT data. Calculations are employed to estimate bottomhole pressures from surface recordings subsequent to removal of the bottomhole gauge following the 1992 70-hr buildup test. These estimated values were combined with the 70-hr data to form the 111-day (from September 12, 1992 through January 1, 1993) LTT buildup test data set. The LTT data were inverted to yield an estimate of X{sub a} = 452 m. Since this is in agreement with the range of estimates from the five short-term bottomhole test, we believe the range X{sub a} = 427-503 m to represent the best estimate for the distance from the well to the nearest boundary. The simulation model presented in Appendix B used L1 = 990 m (Figure 3 in Appendix B) as the distance from the test well to the nearest boundary. The simulation model could probably be improved using a smaller value for L1. The actual location of the boundary to the south of the well is not known from the available geological information. (b) The five bottomhole pressure transient tests of Gladys McCall Well No. 2 over an eight-year period (1983-1991) yield estimates for the permeability-thickness product that differ significantly from each other. The differences, however, can be explained by the partial plugging of the near-well formation during an aborted attempt to inject a scale-inhibitor pill in May 1985, followed by subsequent scouring out the pill precipitates by the flowing fluid during the May 1985-August 1987 production testing. The partial plugging of the near-well formation in conjunction with a known shale stringer that prevents vertical communication in sand 8 (Figure 2 in Appendix A) would reduce the apparent value of kh to about sixty percent of the original RLT value of 13.44 D-m. Inversion of the 79-hr (1985) and 92-hr (1986) buildup tests yield kh estimates of 7.69 and 8.86 D-m, respectively. Inversions of the valid MRT (1987) and FDT (1991) pressure transient data yield estimates very near the original RLT value. The reinterpretation of the MRT data represents a correction of our earlier conclusion (in Appendix A); we now believe that the data from the first and second gauges employed during the MRT are incompatible. Data from the first (''old'') gauge during the drawdown portion of the MRT could not be adequately corrected for the observed drift in the recorded data. Only the second (''new'') gauge data are considered reliable and inversion of the buildup data it recorded yields the estimate for kh that is in agreement with estimates obtained from inversion of the RLT and FDT pressure transient data.

Book Transient Well Testing in Two phase Geothermal Reservoirs

Download or read book Transient Well Testing in Two phase Geothermal Reservoirs written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of well test analysis techniques in two-phase geothermal reservoirs has been conducted using a three-dimensional, two-phase, wellbore and reservoir simulation model. Well tests from Cerro Prieto and the Hawaiian Geothermal project have been history matched. Using these well tests as a base, the influence of reservoir permeability, porosity, thickness, and heat capacity, along with flow rate and fracturing were studied. Single and two-phase transient well test equations were used to analyze these tests with poor results due to rapidly changing fluid properties and inability to calculate the flowing steam saturation in the reservoir. The injection of cold water into the reservoir does give good data from which formation properties can be calculated.

Book Modeling of Geothermal Reservoirs

Download or read book Modeling of Geothermal Reservoirs written by and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This article attempts to critically evaluate the present state of the art of geothermal reservoir simulation. Methodological aspects of geothermal reservoir modeling are briefly reviewed, with special emphasis on flow in fractured media. Then we examine applications of numerical simulation to studies of reservoir dynamics, well test design and analysis, and modeling of specific fields. Tangible impacts of reservoir simulation technology on geothermal energy development are pointed out. We conclude with considerations on possible future developments in the mathematical modeling of geothermal fields. 45 refs., 4 figs., 2 tabs.

Book Thermal Well Test Analysis and Evaluation of Resevoir Characterization Methods Using an Analytical Multi region Composite Reservoir Model

Download or read book Thermal Well Test Analysis and Evaluation of Resevoir Characterization Methods Using an Analytical Multi region Composite Reservoir Model written by Luis Guillermo Acosta and published by . This book was released on 1994 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Renewable Energy Systems

Download or read book Renewable Energy Systems written by Martin Kaltschmitt and published by Springer. This book was released on 2012-12-06 with total page 1898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity is facing a steadily diminishing supply of fossil fuels, causing researchers, policy makers, and the population as a whole to turn increasingly to alternative and especially renewable sources of energy to make up this deficit. Gathering over 80 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technologies, Renewable Energy Systems provides an authoritative introduction to a wide variety of renewable energy sources. State-of-the-art coverage includes geothermal power stations, ocean energy, renewable energy from biomass, waste to energy, and wind power. This comprehensive, two-volume work provides an excellent introduction for those entering these fields, as well as new insights for advanced researchers, industry experts, and decision makers.

Book Integrated Reservoir Asset Management

Download or read book Integrated Reservoir Asset Management written by John Fanchi and published by Gulf Professional Publishing. This book was released on 2010-07-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: All too often, senior reservoir managers have found that their junior staff lack an adequate understanding of reservoir management techniques and best practices needed to optimize the development of oil and gas fields. Written by an expert professional/educator, Integrated Reservoir Asset Management introduces the reader to the processes and modeling paradigms needed to develop the skills to increase reservoir output and profitability and decrease guesswork. One of the only references to recognize the technical diversity of modern reservoir management teams, Fanchi seamlessly brings together concepts and terminology, creating an interdisciplinary approach for solving everyday problems. The book starts with an overview of reservoir management, fluids, geological principles used to characterization, and two key reservoir parameters (porosity and permeability). This is followed by an uncomplicated review of multi-phase fluid flow equations, an overview of the reservoir flow modeling process and fluid displacement concepts. All exercises and case studies are based on the authors 30 years of experience and appear at the conclusion of each chapter with hints in addition of full solutions. In addition, the book will be accompanied by a website featuring supplementary case studies and modeling exercises which is supported by an author generated computer program. - Straightforward methods for characterizing subsurface environments - Effortlessly gain and understanding of rock-fluid interaction relationships - An uncomplicated overview of both engineering and scientific processes - Exercises at the end of each chapter to demonstrate correct application - Modeling tools and additional exercise are included on a companion website

Book Geothermal Reservoir Engineering Research in New Zealand

Download or read book Geothermal Reservoir Engineering Research in New Zealand written by and published by . This book was released on 1978 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although nowadays much of the New Zealand geothermal reservoir research effort is still being concentrated on the older fields of Wairakei and Broadlands there has been a definite advance over recent years in our approach to the studies. On the practical side, long term reinjection trials are now in progress at Broadlands, and drilling, for field evaluation, is well underway at Ngawha, a field characterized by a steam discharge coupled with a hydrostatic pressure gradient. On the theoretical side, well pressure transient analysis and reservoir behavior modeling are probably the primary interests. For the former both multi-element computer modeling programs and two-phase pressure diffusion analysis (Grant, 1978, Grant and Sorey, 1979) are being used by M.A. Grant, E. Bradford and F. Sutton (AMD*) and M.L. Sorey (PEL). Geometry and boundary influences are dominant and estimated steam flows are higher than are consistent with the Corey (1954) expressions for relative permeability. Both of these effects are probably due to the fracture permeability of the reservoirs. A. McNabb (AMD) is currently taking this into account by determining the response to discharge in a fracture-block medium. He is working with 100 meter blocks, consistent with data from lumped parameter models and from well records, with a block permeability of 10−15 m2. Reservoir behavior modeling is probably the research area of greatest current interest with most research groups here involved to some extent. The models range over a wide spectrum, from extreme simplification to sophisticated detail. At the simpler extreme is the model of J. Elder (AU). This consists of two resistors and a condenser in electrical analog form but is coupled with models of the well system and the above surface plant to enable overall system effects and interactions to be assessed.

Book Tenth Workshop on Geothermal Reservoir Engineering

Download or read book Tenth Workshop on Geothermal Reservoir Engineering written by and published by . This book was released on 1985 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The workshop contains presentations in the following areas: (1) reservoir engineering research; (2) field development; (3) vapor-dominated systems; (4) the Geysers thermal area; (5) well test analysis; (6) production engineering; (7) reservoir evaluation; (8) geochemistry and injection; (9) numerical simulation; and (10) reservoir physics. (ACR).