Download or read book Geotechnik Grundbau 3e written by Möller and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Improvement Third Edition written by Klaus Kirsch and published by CRC Press. This book was released on 2012-11-26 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: When finding another location, redesigning a structure, or removing troublesome ground at a project site are not practical options, prevailing ground conditions must be addressed. Improving the ground—modifying its existing physical properties to enable effective, economic, and safe construction—to achieve appropriate engineering performance is an increasingly successful approach. This third edition of Ground Improvement provides a comprehensive overview of the major ground improvement techniques in use worldwide today. Written by recognized experts who bring a wealth of knowledge and experience to bear on their contributions, the chapters are fully updated with recent developments including advancements in equipment and methods since the last edition. The text provides an overview of the processes and the key geotechnical and design considerations as well as equipment needed for successful execution. The methods described are well illustrated with relevant case histories and include the following approaches: Densification using deep vibro techniques or dynamic compaction Consolidation employing deep fabricated drains and associated methods Injection techniques, such as permeation and jet grouting, soil fracture grouting, and compaction grouting New in-situ soil mixing processes, including trench-mixing TRD and panel-mixing CSM approaches The introductory chapter touches on the historical development, health and safety, greenhouse gas emissions, and two less common techniques: blasting and the only reversible process, ground freezing. This practical and established guide provides readers with a solid basis for understanding and further study of the most widely used processes for ground improvement. It is particularly relevant for civil and geotechnical engineers as well as contractors involved in piling and ground engineering of any kind. It would also be useful for advanced graduate and postgraduate civil engineering and geotechnical students.
Download or read book Interaction Between Structural and Geotechnical Engineers written by Rolf Katzenbach and published by Thomas Telford. This book was released on 2003 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report has been prepared in the framework of the Co-operation in Science and Technology (COST) Action C7 for Soil-Structure Interaction in the Urban Civil Engineering. Based on a survey in 13 European countries and with additional input from the COST C7 members, the report focuses on several aspects effecting the interaction between structural and geotechnical engineers. As the theoretical foundation for the interaction between both disciplines is laid during education, the civil engineering education system of several European countries are described and evaluated.
Download or read book Numerical Modelling of Construction Processes in Geotechnical Engineering for Urban Environment written by Theodoros Triantafyllidis and published by CRC Press. This book was released on 2006-02-23 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become increasingly important, particularly in an urban environment, to predict soil behaviour and to confine the settlement or deformation of buildings adjacent to construction sites. One important factor is the choice of construction procedure for the installation of piles, sheet pile walls, anchors or for soil improvement techniques, ground freezing and tunnelling methods. The modelling of construction processes, which are frequently associated with large deformations of the soil and with strong changes in the structure of the soil around the construction plant, in the case of, for example, a drill, a bit, a vibrator, or an excavation tool, requires sophisticated and new methods in numerical modelling. Often the simulation of the construction procedure is neglected in the calculations. Such methods are described and discussed in this book, as are examples of the methods applied to geotechnical practice, field and laboratory testing as well as case studies. This volume provides a valuable source of reference for scientists in geotechnical engineering and numerical modelling, geotechnical engineers, post graduate students, construction companies and consultants, manufacturers of geotechnical construction plants and software suppliers and developers of geotechnical construction methods.
Download or read book Holistic Simulation of Geotechnical Installation Processes written by Theodoros Triantafyllidis and published by Springer. This book was released on 2015-10-30 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines in detail the entire process involved in implementing geotechnical projects, from a well-defined initial stress and deformation state, to the completion of the installation process. The individual chapters provide the fundamental knowledge needed to effectively improve soil-structure interaction models. Further, they present the results of theoretical fundamental research on suitable constitutive models, contact formulations, and efficient numerical implementations and algorithms. Applications of fundamental research on boundary value problems are also considered in order to improve the implementation of the theoretical models developed. Subsequent chapters highlight parametric studies of the respective geotechnical installation process, as well as elementary and large-scale model tests under well-defined conditions, in order to identify the most essential parameters for optimizing the process. The book provides suitable methods for simulating boundary value problems in connection with geotechnical installation processes, offering reliable predictions for the deformation behavior of structures in static contexts or dynamic interaction with the soil.
Download or read book Numerical Methods in Geotechnical Engineering written by Helmut F. Schweiger and published by CRC Press. This book was released on 2006-08-17 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of recent developments in constitutive modelling, numerical implementation issues, and coupled and dynamic analysis. There is a special section dedicated to the numerical modelling of ground improvement techniques, with applications of numerical methods for solving practical boundary value problems, such as deep excavations, tunne
Download or read book Numerical Methods in Geotechnical Engineering written by Thomas Benz and published by CRC Press. This book was released on 2010-05-25 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering contains 153 scientific papers presented at the 7th European Conference on Numerical Methods in Geotechnical Engineering, NUMGE 2010, held at Norwegian University of Science and Technology (NTNU) in Trondheim, Norway, 2 4 June 2010.The contributions cover topics from emerging research to engineering pra
Download or read book Recommendations on Excavations written by Deutsche Gesellschaft für Geotechnik and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the issue of these recommendations, which have the character of a standard, the "Building Excavations" working group of the German Geotechnics Association (DGGT) aims to provide assistance with the design and structural calculation of excavation support works. The introduction of the Eurocodes for building control purposes made necessary a revision of the previous edition of the recommendations to comply with the requirements of DIN EN 1997-1:2009 together with the national annex DIN 1997-1/NA:2010-12 and the supplementary regulations of DIN 1054:2010-12. All recommendations were thoroughly checked, revised where necessary and adapted to new knowledge. Chapter 10 "Building excavations in water" was substantially revised. Due to the progress of development of measurement instruments and the more stringent requirements, Chapter 14 "Instrumentation for the monitoring and supervision of building excavation support works" was formulated completely anew. The recommendations of the working group "Building Excavations" should be of assistance, - to simplify the design and structural calculation of excavation support works, - to harmonise loading assumptions and calculation procedures, - to ensure the structural stability of excavation support works and their individual elements and - to improve the cost-effectiveness of excavation support works.
Download or read book Geotechnical Engineering Handbook Procedures written by Ulrich Smoltczyk and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the Handbook covers the geotechnical procedures used in manufacturing anchors and piles as well as for improving or underpinning foundations, securing existing constructions, controlling ground water, excavating rocks and earth works. It also treats such specialist areas as the use of geotextiles and seeding.
Download or read book Advances in Spatio Temporal Analysis written by Xinming Tang and published by CRC Press. This book was released on 2007-08-23 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Geographic Information Technology have raised the expectations of users. A static map is no longer enough; there is now demand for a dynamic representation. Time is of great importance when operating on real world geographical phenomena, especially when these are dynamic. Researchers in the field of Temporal Geographical Information Systems (TGIS) have been developing methods of incorporating time into geographical information systems. Spatio-temporal analysis embodies spatial modelling, spatio-temporal modelling and spatial reasoning and data mining. Advances in Spatio-Temporal Analysis contributes to the field of spatio-temporal analysis, presenting innovative ideas and examples that reflect current progress and achievements.
Download or read book Small strain Stiffness of Soils and Its Numerical Consequences written by Thomas Benz and published by . This book was released on 2007 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommendations on Excavations written by Deutsche Gesellschaft fr and published by John Wiley & Sons. This book was released on 2008-06-23 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of these recommendations is to harmonize and further develop the methods, according to which excavations are prepared, calculated and carried out. Since 1980, these have been drawn up by the working group "Excavations" at the German Geotechnical Society (Deutsche Gesellschaft fur Geotechnik DGGT) and are similar to a set of standards. They help to simplify analysis of excavation enclosures, to unify load approaches and analysis procedures, to guarantee the stability and serviceability of the excavation structure and its individual components, and to find out an economic design of the excavation structure. For this new edition, all recommendations have been reworked in accordance with EN 1997-1 (Eurocode 7) and DIN 1054-1. In addition, new recommendations on the use of the modulus of subgrade reaction method and the finite element method (FEM), as well as a new chapter on excavations in soft soils, have been added.
Download or read book Analysis of Pile Foundations Subject to Static and Dynamic Loading written by Amir M. Kaynia and published by CRC Press. This book was released on 2021-08-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.
Download or read book Recommendations on Excavations written by Deutsche Gesellschaft für Geotechnik and published by John Wiley & Sons. This book was released on 2009-02-05 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of these recommendations is to harmonize and further develop the methods, according to which excavations are prepared, calculated and carried out. Since 1980, these have been drawn up by the working group "Excavations" at the German Geotechnical Society (Deutsche Gesellschaft fur Geotechnik DGGT) and are similar to a set of standards. They help to simplify analysis of excavation enclosures, to unify load approaches and analysis procedures, to guarantee the stability and serviceability of the excavation structure and its individual components, and to find out an economic design of the excavation structure. For this new edition, all recommendations have been reworked in accordance with EN 1997-1 (Eurocode 7) and DIN 1054-1. In addition, new recommendations on the use of the modulus of subgrade reaction method and the finite element method (FEM), as well as a new chapter on excavations in soft soils, have been added.
Download or read book Cone Penetration Testing 2022 written by Guido Gottardi and published by CRC Press. This book was released on 2022-06-23 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 5th International Symposium on Cone Penetration Testing (CPT’22), held in Bologna, Italy, 8-10 June 2022. More than 500 authors - academics, researchers, practitioners and manufacturers – contributed to the peer-reviewed papers included in this book, which includes three keynote lectures, four invited lectures and 169 technical papers. The contributions provide a full picture of the current knowledge and major trends in CPT research and development, with respect to innovations in instrumentation, latest advances in data interpretation, and emerging fields of CPT application. The paper topics encompass three well-established topic categories typically addressed in CPT events: - Equipment and Procedures - Data Interpretation - Applications. Emphasis is placed on the use of statistical approaches and innovative numerical strategies for CPT data interpretation, liquefaction studies, application of CPT to offshore engineering, comparative studies between CPT and other in-situ tests. Cone Penetration Testing 2022 contains a wealth of information that could be useful for researchers, practitioners and all those working in the broad and dynamic field of cone penetration testing.
Download or read book High Performance Computing in Science and Engineering 01 written by Egon Krause and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume summarizes the state of the art in supercomputing, with special emphasis on the industrial relevance of the presented results and methods. The book showcases an innovative usage of state-of-the-art modeling, novel numerical algorithms and the use of leading-edge high-performance computing systems in a GRID-like environment.
Download or read book Numerical Simulation in Tunnelling written by Gernot Beer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the results of the joint research initiative "Numercial Simulation in Tunneling". In doing so it provides a thorough guide to improving the safety and economy of tunnels by discussing the application of numerical simulation methods to assist tunnel engineers. Numerical simulation tools for the estimation of the required tunnel support and the required construction measures are described in this book. By using them, it is possible to study the impact on the construction and on the environment at the planning stadium and during construction. This will result in an improvement of the safety and economy of tunnels.
