Download or read book Geotechnical Technical Guidance Manual written by U. S. Department of Transportation and published by Createspace Independent Pub. This book was released on 2013-01-10 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Geotechnical Technical Guidance Manual (TGM) provides technical guidance for geotechnical work performed by the Federal Lands Highway (FLH). It provides guidance for understanding and applying policies, standards and criteria in recognition of the need to manage financial and public safety risk and accomplish the missions of FHWA, FLH and partner agencies. Specific topics include geotechnical reconnaissance, site and subsurface investigation, analysis and design, reporting, PS&E involvement, construction support, performance monitoring, emergency response and consultant roles. The guidance in this TGM supports the policies, standards and standard practices presented in Chapter 6 of the Project Development and Design Manual (PDDM). Additionally, the TGM provides guidance for activities where standards and standard practices do not exist and it provides access to and guidance for the use of new technologies. Chapter 6 of the PDDM is the source for general direction on “what” should be performed, whereas guidance herein provides recommendations and options for “how” to perform these tasks. Like the PDDM, the TGM is intended to be used primarily as a web-based electronic reference document. Not all guidance is presented directly in the manual. When published sources present guidance that satisfies the requirements of FLH, or does so with only minor modification required, the TGM provides citations and links to those sources. If necessary, commentary on the application of these sources is provided here. This is done to keep the TGM small and more manageable, and also to allow easy and timely incorporation of new guidance as it is developed and published by FLH, FHWA and others. Technical guidance references cited and linked in this manual are classified as either “Primary”, or “Secondary”. Primary sources either present preferred guidance on how to accomplish a task or, when equal guidance is available through many sources, the Primary source is most widely available. “Secondary” sources are additional documents that are often relied on for FLH work; they present guidance to augment the Primary source. The PDDM presents work requirements through the official statement of policy and standards so it is an essential companion manual to the TGM. The TGM does not stand alone; policies and standards are repeated here only as necessary to offer guidance on their application. If discrepancy in the statement of policy or standards exists, the PDDM has precedence. Division-level documents also exist within FLH to provide guidance on unique technical practices or procedures at FLH Divisions; where these exist they should be followed for work within that Division. Also, although the organization of each of the Divisions is similar, there are differences. For this reason, the project delivery process and how the Geotechnical Discipline works within that process is described largely at the Division level.
Download or read book Technical Guidance Documents written by Hong Kong Geotechnical Engineering Office and published by . This book was released on 2002 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Guidance Documents written by Hong Kong Geotechnical Engineering Office and published by . This book was released on 2007 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Manual written by and published by . This book was released on 2012 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Highway Subdrainage Design written by Lyle K. Moulton and published by . This book was released on 1980 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Deep Mixing Method written by Masaki Kitazume and published by CRC Press. This book was released on 2013-02-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book EPA National Publications Catalog written by United States. Environmental Protection Agency and published by . This book was released on 1999 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federal Lands Highway written by and published by . This book was released on 1991 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EPA 200 B written by and published by . This book was released on 1998 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects written by United States. Federal Highway Administration and published by . This book was released on 1981 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Geotechnical Design Codes of Practice written by IOS Press and published by IOS Press. This book was released on 2012-12-18 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ground is one of the most highly variable of engineering materials. It is therefore not surprising that geotechnical designs depend on local site conditions and local engineering experience. Engineering practices, relating to investigation and design methods (site understanding) and to safety levels acceptable to society, will therefore vary between different regions. The challenge in geotechnical engineering is to make use of worldwide geotechnical experience, established over many years, to aid in the development and harmonization of geotechnical design codes. Given the significant uncertainties involved, empiricism and engineering judgment will undoubtedly always be an essential element of geotechnical design. However, rigorous and scientific approaches based on probability theory are finding increased attention in the calibration of modern geotechnical codes of practice and these codes can and should be used to aid fundamental engineering judgment. Containing contributions on Code Implementation, Code Application and Code Development, this book provides a single resource that code developers, practitioners, and researchers can use to understand the different choices made by national code developers around the world. Furthermore, the book highlights some of the key challenges faced worldwide concerning the ongoing process of harmonizing geotechnical design code specifications.
Download or read book ICE Manual of Geotechnical Engineering Volume 1 written by Tim Chapman and published by Emerald Group Publishing. This book was released on 2023-11-17 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Manual of Geotechnical Engineering, Second edition brings together an exceptional breadth of material to provide a definitive reference on geotechnical engineering solutions. Written and edited by leading specialists, each chapter provides contemporary guidance and best practice knowledge for civil and structural engineers in the field.
Download or read book Gravel Roads written by Ken Skorseth and published by . This book was released on 2000 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.
Download or read book Guide to Technical Resources for the Design of Land Disposal Facilities written by and published by . This book was released on 1989 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical and Geoenvironmental Engineering Handbook written by R. Kerry Rowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface. Dedication. List of Figures. List of Tables. List of Contributors. Basic Behavior and Site Characterization. 1. Introduction; R.K. Rowe. 2. Basic Soil Mechanics; P.V. Lade. 3. Engineering Properties of Soils and Typical Correlations; P.V. Lade. 4. Site Characterization; D.E. Becker. 5. Unsaturated Soil Mechanics and Property Assessment; D.G. Fredlund, et al. 6. Basic Rocks Mechanics and Testing; K.Y. Lo, A.M. Hefny. 7. Geosynthetics: Characteristics and Testing; R.M. Koerner, Y.G. Hsuan. 8. Seepage, Drainage and Dewatering; R.W. Loughney. Foundations and Pavements. 9. Shallo.
Download or read book Highway and Rail Transit Tunnel Inspection Manual written by and published by . This book was released on 2005 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
