Download or read book Geotechnical Design and Practice written by K. Ilamparuthi and published by Springer. This book was released on 2018-06-27 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles covering a wide spectrum of topics in geotechnical engineering, including properties of soils, unsaturated soil mechanics, ground improvement, liquefaction and seismic studies, soil-structure interaction and stability analysis of man-made and natural slopes. The contributing authors are renowned researchers in their respective fields, which include soft ground improvement, seismic response of retaining structure using soil-structure Interaction (SSI) principles, and unsaturated soils. Based on keynote addresses and invited talks presented at the Indian Geotechnical Conference 2016, this book will prove a valuable resource for practicing engineers and researchers in the field of geotechnical engineering.
Download or read book Modern Geotechnical Design Codes of Practice written by Patrick Arnold and published by IOS Press. This book was released on 2013 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ground is one of the most highly variable of engineering materials. It is therefore not surprising that geotechnical designs depend on local site conditions and local engineering experience. Engineering practices, relating to investigation and design methods site understanding and to safety levels acceptable to society, will therefore vary between different regions.The challenge in geotechnical engineering is to make use of worldwide geotechnical experience, established over many years, to aid in the development and harmonization of geotechnical design codes. Given the significant uncertainties involved, empiricism and engineering
Download or read book Geotechnical Design to Eurocode 7 written by Trevor L.L. Orr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to explain the philosophy set out in Eurocode 7, the new European code of practice for geotechnical design, and, by means of series of typical examples, to show how this philosophy is used in practice. This book is aimed at: • practising engineers, to assist them to carry out geotechnical designs to Eurocode 7 using the limit state design method and partial factors; • lecturers and students on courses where design to Eurocode 7 is being taught. It is envisaged that practising engineers, using this book to assist them carry out geotechnical designs to Eurocode 7, will have access to the prestandard version of Eurocode 7, ENV 1997 -I, so the authors have concentrated on the main principles and have not provided a commentary on all the clauses. However sufficient detail has been included in the book to enable it to be used on its own by those learning the design principles who may not have access to Eurocode 7. For example, the values of the partial factors and the principal equations given in Eurocode 7 have been included and these are used in the design examples in this book. To assist the reader, the numbering, layout and titles of the chapters closely follow those presented in Eurocode 7.
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Technology and Practice in Geotechnical Engineering written by Adeyeri, Joseph B. and published by IGI Global. This book was released on 2014-09-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge surrounding the behavior of earth materials is important to a number of industries, including the mining and construction industries. Further research into the field of geotechnical engineering can assist in providing the tools necessary to analyze the condition and properties of the earth. Technology and Practice in Geotechnical Engineering brings together theory and practical application, thus offering a unified and thorough understanding of soil mechanics. Highlighting illustrative examples, technological applications, and theoretical and foundational concepts, this book is a crucial reference source for students, practitioners, contractors, architects, and builders interested in the functions and mechanics of sedimentary materials.
Download or read book From Research to Practice in Geotechnical Engineering written by James E. Laier and published by ASCE Publications. This book was released on 2008 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Research to Practice in Geotechnical Engineering, GSP 180, honors Dr. John H. Schmertmann, Professor Emeritus and P.E., for his contributions to civil engineering. It begins with his biography, a list of his students and writings, followed by reprints of his selection of 16 representative papers from his career. Twenty-eight new, mostly invited papers follow on a great variety of subjects, including: the installation and testing of piles; pile-structure interaction; liquefaction and its mitigation; case histories of settlement and landslide mitigation and capping a superfund landfill; and computer modeling. The authors include six members of the National Academy of Engineering. This GSP concludes with a paper by one of these, Dr. Schmertmann, which itself concludes with a suggestion for improving your technical writing. Everyone working in the geotechnical profession will find something interesting and useful herein.
Download or read book Sound Geotechnical Research to Practice written by Robert D. Holtz and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 230 contains 39 papers on applied geotechnical engineering in soft ground construction, reinforced soils, and fundamental soil behavior presented in honor of Robert D. Holtz.
Download or read book Geotechnical Engineering Design written by Ming Xiao and published by John Wiley & Sons. This book was released on 2015-05-26 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible, clear, concise, and contemporary course in geotechnical engineering design. covers the major in geotechnical engineering packed with self-test problems and projects with an on-line detailed solutions manual presents the state-of-the-art field practice covers both Eurocode 7 and ASTM standards (for the US)
Download or read book Geotechnical Engineering written by Richard L. Handy and published by McGraw Hill Professional. This book was released on 2007-01-26 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the Latest Developments in Soil Testing and New Applications of Geotechnical Engineering Geotechnical Engineering: Principles and Practices offers students and practicing engineers a concise, easy-to-understand approach to the principles and methods of soil and geotechnical engineering. This updated classic builds from basic principles of soil mechanics and applies them to new topics, including mechanically stabilized earth (MSE), and intermediate foundations. This Fifth Edition features: Over 400 detailed illustrations and photographs Unique background material on the geological, pedological, and mineralogical aspects of soils with emphasis on clay mineralogy, soil structure, and expansive and collapsible soils. New coverage of mechanically stabilized earth (MSE); intermediate foundations; in-situ soil testing: statistical analysis of data; “FORE,” a scientific method for analyzing settlement; writing the geotechnical report; and the geotechnical engineer as a sleuth and expert witness. Get Quick Access to Every Soil and Geotechnical Engineering Topic • Igneous Rocks as Ultimate Sources for Soils • The Soil Profile • Soil Minerals • Particle Size and Gradation • Soil Fabric and Soil Structure • Soil Density and Unit Weight • Soil Water • Soil Consistency and Engineering Classification • Compaction • Seepage • Stress Distribution • Settlement • Shear Strength • Lateral Stress and Retaining Walls • MSE Walls and Soil Nailing • Slope Stability, Landslides, Embankments, and Earth Dams • Bearing Capacity of Shallow Foundations • Deep Foundations • Intermediate Foundations • Loads on Pipes • In-Situ Testing • Introduction to Soil Dynamics • The Geotechnical Report
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2014-02-10 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains in a concise tabular format the key issues relevant to geotechnical investigations, assessments and designs in common practice. There are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation and the classification of the soil and rock properties, after which some of the more used testing is covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. The emphasis throughout is on application to practice. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses. It evolved from the need to have a "go to" reference book which has both breadth and depth of information to apply immediately to projects. To keep to a handbook size one has to compress/restrict details to a few key bullet points – but a comprehensive reference list provides the "appendix" for additional information if required. This 2nd edition keeps to that format but contains updated information and adjustments that take into account feedback received since initial publication.
Download or read book Geotechnical Engineering written by V.N.S. Murthy and published by CRC Press. This book was released on 2002-10-25 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth retaining wall and explores a pioneering approach for predicting the nonlinear behavior of laterally loaded long vertical and batter piles. As complete and authoritative as any volume on the subject, it discusses soil formation, index properties, and classification; soil permeability, seepage, and the effect of water on stress conditions; stresses due to surface loads; soil compressibility and consolidation; and shear strength characteristics of soils. While this book is a valuable teaching text for advanced students, it is one that the practicing engineer will continually be taking off the shelf long after school lets out. Just the quick reference it affords to a huge range of tests and the appendices filled with essential data, makes it an essential addition to an civil engineering library.
Download or read book Geotechnical Practice for Waste Disposal written by D.E. Daniel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earth scientists and geotechnical engineers are increasingly challenged to solve environmental problems related to waste disposal facilities and cleanup of contaminated sites. The effort has given rise to a new discipline of specialists in the field of environmental geotechnology. To be effective, environmental geotechnologists must not only be armed with the traditional knowledge of fields such as geology and civil engineering, but also be knowledgeable of principles of hydrogeology, chemistry, and biological processes. In addition, the environmental geotechnologist must be completely up to date on the often complex cadre of local and national regulations, must comprehend the often complex legal issues and sometimes mind-boggling financial impli cations of a project, and must be able to communicate effectively with a host of other technical specialists, regulatory officials, attorneys, local land owners, journalists, and others. The field of environmental geo technology will no doubt continue to offer unique challenges. The purpose of this book is to summarize the current state of practice in the field of environmental geotechnology. Part One covers broadly applicable principles such as hydrogeology, geochemistry, and con taminant transport in soil and rock. Part Two describes in detail the underlying principles for design and construction of new waste disposal facilities. Part Three covers techniques for site remediation. Finally, Part Four addresses the methodologies for monitoring. The topics of 'waste disposal' and 'site remediation' are extra ordinarily broad.
Download or read book Disturbed Soil Properties and Geotechnical Design written by Andrew Noel Schofield and published by Thomas Telford. This book was released on 2005 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an easily accessible account of critical state of soil mechanics, geotechnical centrifuge testing and the original Cam-Clay model invented by the author.
Download or read book Unsaturated Soil Mechanics in Geotechnical Practice written by Geoffrey E Blight and published by CRC Press. This book was released on 2013-07-11 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are other books on unsaturated soil mechanics, but this book is different. Unsaturated soil mechanics is only one aspect of a continuous range of soil mechanics studies that extends from the rheology of high water content soil slurries to the mechanics of soft soils, to stiff saturated soils, to unsaturated soils, and, at the far end of the r
Download or read book Geotechnical Engineering written by Donald P. Coduto and published by Prentice Hall. This book was released on 2011 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Engineering: Principles and Practices, 2/e, is ideal or junior-level soil mechanics or introductory geotechnical engineering courses. This introductory geotechnical engineering textbook explores both the principles of soil mechanics and their application to engineering practice. It offers a rigorous, yet accessible and easy-to-read approach, as well as technical depth and an emphasis on understanding the physical basis for soil behavior. The second edition has been revised to include updated content and many new problems and exercises, as well as to reflect feedback from reviewers and the authors' own experiences.
Download or read book Performance Based Design in Earthquake Geotechnical Engineering written by Takaji Kokusho and published by CRC Press. This book was released on 2009-09-24 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current developments in performance-based design (PBD) in earthquake geotechnical engineering, including various case histories, numerical methods, soil investigations and engineering practice. Special attention is paid to the 2008 Wenchuan Sichuan earthquake in China, performance evaluations, the role of soil investigations, criteria/design codes, and the performance and future perspectives of PBD. The information in this book will be of particular interest to researchers in earthquake geotechnical engineering, and practicing geotechnical and structural engineers.
Download or read book Unsaturated Soil Mechanics in Engineering Practice written by Delwyn G. Fredlund and published by John Wiley & Sons. This book was released on 2012-07-30 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to unsaturated soil— from the world's experts on the subject This book builds upon and substantially updates Fredlund and Rahardjo's publication, Soil Mechanics for Unsaturated Soils, the current standard in the field of unsaturated soils. It provides readers with more thorough coverage of the state of the art of unsaturated soil behavior and better reflects the manner in which practical unsaturated soil engineering problems are solved. Retaining the fundamental physics of unsaturated soil behavior presented in the earlier book, this new publication places greater emphasis on the importance of the "soil-water characteristic curve" in solving practical engineering problems, as well as the quantification of thermal and moisture boundary conditions based on the use of weather data. Topics covered include: Theory to Practice of Unsaturated Soil Mechanics Nature and Phase Properties of Unsaturated Soil State Variables for Unsaturated Soils Measurement and Estimation of State Variables Soil-Water Characteristic Curves for Unsaturated Soils Ground Surface Moisture Flux Boundary Conditions Theory of Water Flow through Unsaturated Soils Solving Saturated/Unsaturated Water Flow Problems Air Flow through Unsaturated Soils Heat Flow Analysis for Unsaturated Soils Shear Strength of Unsaturated Soils Shear Strength Applications in Plastic and Limit Equilibrium Stress-Deformation Analysis for Unsaturated Soils Solving Stress-Deformation Problems with Unsaturated Soils Compressibility and Pore Pressure Parameters Consolidation and Swelling Processes in Unsaturated Soils Unsaturated Soil Mechanics in Engineering Practice is essential reading for geotechnical engineers, civil engineers, and undergraduate- and graduate-level civil engineering students with a focus on soil mechanics.
