Download or read book Geotechnical Correlations for Soils and Rocks written by Jean-Claude Verbrugge and published by John Wiley & Sons. This book was released on 2018-07-31 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modelling tools for soils and rocks require more and more specific parameters not always available from the standard or usual survey campaigns, this generally for reasons of delay or costs. The use of correlations to solve the gap between available parameters and the required ones is a common practice. Many of them exist but are spread throughout numerous papers or books. The aim of this formulary is to provide a large synthesis of the existing correlations accumulated by the authors during more than 40 years academic and consulting careers.

Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.

Download or read book Engineering Properties of Soils and Rocks written by F. G. Bell and published by Elsevier. This book was released on 2013-10-22 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Properties of Soils and Rocks, Third Edition serves as a guide to the engineering properties and behavior of soils and rocks. The text also complements other texts on rock and soil mechanics. The book covers topics such as the properties and classification of soils such as tills and other kinds of soils related to cold climates, tropical soils, and organic soils such as peat. The text also includes the engineering behavior and properties, classification and description, discontinuities, and weathering of rocks and rock masses. The monograph is recommended for engineers who would like to know about the properties of soils and rocks and the application of their study in the field of engineering.

Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Download or read book Rock and Soil Mechanics written by W. Derski and published by Elsevier. This book was released on 2012-12-02 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although theoretical in character, this book provides a useful source of information for those dealing with practical problems relating to rock and soil mechanics - a discipline which, in the view of the authors, attempts to apply the theory of continuum to the mechanical investigation of rock and soil media. The book is in two separate parts. The first part, embodying the first three chapters, is devoted to a description of the media of interest. Chapter 1 introduces the main argument and discusses the essence of the discipline and its links with other branches of science which are concerned, on the one hand, with technical mechanics and, on the other, with the properties, origins, and formation of rock and soil strata under natural field conditions. Chapter 2 describes mechanical models of bodies useful for the purpose of the discourse and defines the concept of the limit shear resistance of soils and rocks. Chapter 3 gives the actual properties of soils and rocks determined from experiments in laboratories and in situ. Several tests used in geotechnical engineering are described and interconnections between the physical state of rocks and soils and their rheological parameters are considered.The second part of the book considers the applications of various theories which were either first developed for descriptive purposes in continuum mechanics and then adopted in soil and rock mechanics, or were specially developed for the latter discipline. Chapter 4 discusses the application of the theory of linear viscoelasticity in solving problems of stable behaviour of rocks and soils. Chapter 5 covers the use of the groundwater flow theory as applied to several problems connected with water movement in an undeformable soil or rock skeleton. Chapter 6 is a natural expansion of the arguments put forward in the previous chapter. Here the movement of water is regarded as the cause of deformation of the rock or soil skeleton and the consolidation theory developed on this basis is presented in a novel formulation. Some new engineering solutions are also reported. The seventh chapter is devoted to the limit state theory as applied to the study of the mechanical behaviour of soils and rocks. It presents some new solutions and methods which include both static and kinematic aspects of the problem, and some original effective methods for investigating media of limited cohesion. The final chapter gives a systematic account of the mechanics of highly dispersed soils, commonly called clays.

Download or read book Evaluation of Soil and Rock Properties written by and published by . This book was released on 2002 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographic Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measure for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.

Download or read book Engineering Properties of Soils and Rocks written by Frederic Gladstone Bell and published by Butterworth-Heinemann. This book was released on 1983 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Characteristics of Soils and Rocks of India written by Sanjay Kumar Shukla and published by CRC Press. This book was released on 2021-12-31 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents mainly the geotechnical details of geomaterials (soils and rocks) found in all the 36 states and union territories of India. There are 37 chapters in this book. Chapter 1 provides an overview of geomaterials, focusing on their engineering properties as determined based on the project site investigations and laboratory/field tests; this will help readers understand the technical details explained throughout the book, with each chapter dealing with geomaterials of one state/union territory only. Each chapter, contributed by a team of authors, follows a common template with the following sections: introduction, major types of soils and rocks, properties of soils and rocks, use of soils and rocks as construction materials, foundation and other geotechnical structures, other geomaterials, natural hazards, case studies and field tests, geoenvironmental impact on soils and rocks, concluding remarks and references. All the chapters cover highly practical information and technical data for application in ground infrastructure projects, including foundations of structures (buildings, towers, tanks, machines and so on), highway, railway and airport pavements, embankments, retaining structures/walls, dams, reservoirs, canals and ponds, and landfills and tunnels. These details are also highly useful for professionals dealing with mining, oil and gas projects and agricultural and aquacultural engineering projects. Although this book covers the Indian ground characteristics, the information provided can be helpful in some suitable forms to the professionals of other countries having similar ground conditions and applications.

Download or read book Soft Clay Engineering and Ground Improvement written by Jay Ameratunga and published by CRC Press. This book was released on 2021-04-21 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft Clay Engineering and Ground Improvement covers the design and implementation of ground improvement techniques as applicable to soft clays. This particular subject poses major geotechnical challenges in civil engineering. Not only civil engineers, but planners, architects, consultants and contractors are now aware what soft soils are and the risks associated with development of such areas. The book is designed as a reference and useful tool for those in the industry, both to consultants and contractors. It also benefits researchers and academics working on ground improvement of soft soils, and serves as an excellent overview for postgraduates. University lecturers are beginning to incorporate more ground improvement topics into their curricula, and this text would be ideal for short courses for practicing engineers. It includes several examples to assist a newcomer to carry out preliminary designs. The three authors, each with dozens of years of experience, have witnessed and participated in the rapid evolvement of ground improvement in soft soils. In addition, top-tier professionals who deal with soft clays and ground improvement on a daily basis have contributed, providing their expertise in dealing with real-world problems and practical solutions.

Download or read book An Introduction to Engineering Properties of Soil and Rock written by J. Guyer and published by Independently Published. This book was released on 2018-02-19 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, structural and geotechnical engineers interested in engineering properties of soil an rock. Here is what is discussed: 1. SCOPE 2. COMPACTION CHARACTERISTICS OF SOIL 3. DENSITY OF COHESIONLESS SOILS 4. PERMEABILITY 5. CONSOLIDATION 6. SWELLING, SHRINKAGE AND COLLAPSIBILITY 7. SHEAR STRENGTH OF SOILS 8. ELASTIC PROPERTIES 9. MODULUS OF SUBGRADE REACTION 10. COEFFICIENT OF AT-REST EARTH PRESSURE.

Download or read book Geotechnical Engineering in Residual Soils written by Laurence D. Wesley and published by John Wiley & Sons. This book was released on 2010-08-05 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wiley has long held a pre-eminent position as a publisher of books on geotechnical engineering, with a particular strength in soil behavior and soil mechanics, at both the academic and professional level. This reference will be the first book focused entirely on the unique engineering properties of residual soil. Given the predominance of residual soils in the under-developed parts of the United States and the Southern Hemisphere, and the increasing rate of new construction in these regions, the understanding of residual soils is expected to increase in importance in the coming years. This book will be written for the practicing geotechnical engineer working to any degree with residual soils. It will describe the unique properties of residual soil and provide innovative design techniques for building on it safely.The author will draw on his 30 years of practical experience as a practicing geotechnical engineer, imbuing the work with real world examples and practice problems influenced by his work in South America and Southeast Asia.

Download or read book Reliability and Statistics in Geotechnical Engineering written by Gregory B. Baecher and published by John Wiley & Sons. This book was released on 2005-08-19 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk and reliability analysis is an area of growing importance in geotechnical engineering, where many variables have to be considered. Statistics, reliability modeling and engineering judgement are employed together to develop risk and decision analyses for civil engineering systems. The resulting engineering models are used to make probabilistic predictions, which are applied to geotechnical problems. Reliability & Statistics in Geotechnical Engineering comprehensively covers the subject of risk and reliability in both practical and research terms * Includes extensive use of case studies * Presents topics not covered elsewhere--spatial variability and stochastic properties of geological materials * No comparable texts available Practicing engineers will find this an essential resource as will graduates in geotechnical engineering programmes.

Download or read book Geotechnical Engineering written by V.N.S. Murthy and published by CRC Press. This book was released on 2002-10-25 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth retaining wall and explores a pioneering approach for predicting the nonlinear behavior of laterally loaded long vertical and batter piles. As complete and authoritative as any volume on the subject, it discusses soil formation, index properties, and classification; soil permeability, seepage, and the effect of water on stress conditions; stresses due to surface loads; soil compressibility and consolidation; and shear strength characteristics of soils. While this book is a valuable teaching text for advanced students, it is one that the practicing engineer will continually be taking off the shelf long after school lets out. Just the quick reference it affords to a huge range of tests and the appendices filled with essential data, makes it an essential addition to an civil engineering library.

Download or read book Foundation Engineering in the Face of Uncertainty written by Fred H. Kulhawy and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIDTH: 405pt; BORDER-COLLAPSE: collapse border=0 cellSpacing=0 cellPadding=0 width=540> WIDTH: 405pt; mso-width-source: userset; mso-width-alt: 19748 width=540> HEIGHT: 31.5pt height=42> BORDER-BOTTOM: #f0f0f0; BORDER-LEFT: #f0f0f0; BACKGROUND-COLOR: transparent; WIDTH: 405pt; HEIGHT: 31.5pt; BORDER-TOP: #f0f0f0; BORDER-RIGHT: #f0f0f0 class=xl65 height=42 width=540>GSP 229 contains 54 papers on risk and uncertainty in foundation engineering presented in honor of Fred H. Kulhawy.

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2017-06-29 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains in a concise tabular format the key issues relevant to geotechnical investigations, assessments and designs in common practice. There are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation and the classification of the soil and rock properties, after which some of the more used testing is covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. The emphasis throughout is on application to practice. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses. It evolved from the need to have a "go to" reference book which has both breadth and depth of information to apply immediately to projects. To keep to a handbook size one has to compress/restrict details to a few key bullet points � but a comprehensive reference list provides the "appendix" for additional information if required. This 2nd edition keeps to that format but contains updated information and adjustments that take into account feedback received since initial publication.

Download or read book In Situ Tests in Geotechnical Engineering written by Jacques Monnet and published by John Wiley & Sons. This book was released on 2015-12-07 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with in-situ tests that are performed in geotechnics to identify and characterize the soil. These measurements are then used to size the Civil Engineering works This book is intended for engineers, students and geotechnical researchers. It provides useful information for use and optimal use of in-situ tests to achieve a better book adaptation of civil engineering on the ground