Download or read book Geotechnical Centrifuge Technology written by R.N. Taylor and published by CRC Press. This book was released on 2018-10-08 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough review of this powerful and sophisticated technique for modelling soil structure interactions. It has been written by an international team of authors.
Download or read book Physical Models written by Bill Addis and published by John Wiley & Sons. This book was released on 2020-11-02 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.
Download or read book Centrifuge Modelling in Geotechnics written by Christophe Gaudin and published by CRC Press. This book was released on 2015-04-15 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifuge modelling provides valuable insights into soil behaviour and soil structure interaction and assists in solving a variety of geotechnical engineering problems and in designing geotechnical structures. With the rapid developments associated with motion control, sensors and data acquisition systems, centrifuge technology offers new opportunities to find solutions for more and more complex challenges. Focusing on the application of state-of-the-art modern centrifuge technology and modelling techniques, this book is a complete guide to planning, conducting and interpreting centrifuge tests. It explains the underlying principles, design of experiments, and application of results and considers likely future trends and applications. Key coverage includes Centrifuge technology Similitude principles Model preparation and instrumentation Soil characterisation Centrifuge modelling practices and techniques Written by senior academics from the world-leading geotechnical centrifuge centre at the University of Western Australia, this book is a must-have for operators and managers of geotechnical centrifuge centres. It is also an invaluable guide for engineers seeking to maximise the benefits they can draw from centrifuge modelling and for graduate students studying geotechnical modelling.
Download or read book Centrifuges in Soil Mechanics written by W.H. Craig and published by CRC Press. This book was released on 2020-08-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains technical papers, presented in a discussion session at the XI International Conference on Soil Mechanics and Foundation Engineering held in San Francisco in 1985, on the role of centrifuge in geotechnical testing, with descriptions of test facilities.
Download or read book Centrifuge Modelling for Civil Engineers written by Gopal Madabhushi and published by CRC Press. This book was released on 2014-07-28 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solve Complex Ground and Foundation Problems Presenting more than 25 years of teaching and working experience in a wide variety of centrifuge testing, the author of Centrifuge Modelling for Civil Engineers fills a need for information about this field. This text covers all aspects of centrifuge modelling. Expertly explaining the basic principles, the book makes this technique accessible to practicing engineers and researchers. Appeals to Non-Specialists and Specialists Alike Civil engineers that are new to the industry can refer to this material to solve complex geotechnical problems. The book outlines a generalized design process employed for civil engineering projects. It begins with the basics, and then moves on to increasingly complex methods and applications including shallow foundations, retaining walls, pile foundations, tunnelling beneath existing pile foundations, and assessing the stability of buildings and their foundations following earthquake-induced soil liquefaction. It addresses the use of modern imaging technique, data acquisition, and modelling techniques. It explains the necessary signal processing tools that are used to decipher centrifuge test data, and introduces the reader to the specialist aspects of dynamic centrifuge modelling used to study dynamic problems such as blast, wind, or wave loading with emphasis on earthquake engineering including soil liquefaction problems. Introduces the equipment and instrumentation used in centrifuge testing Presents in detail signal processing techniques such as smoothing and filtering Provides example centrifuge data that can be used for sample analysis and interpretation Centrifuge Modelling for Civil Engineers effectively describes the equipment, instrumentation, and signal processing techniques required to make the best use of the centrifuge modelling and test data. This text benefits graduate students, researchers, and practicing civil engineers involved with geotechnical issues.
Download or read book Progress in Geotechnical Dynamic Centrifuge Modeling written by A. Anandarajah and published by . This book was released on 1985 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report discusses the history and technical advances of centrifuge modeling of highly dynamic geotechnical events. Difficulties and validity of centrifuge modeling technology are presented along with examples of dynamic centrifuge modeling and advantages of using centrifuge modeling technology to study the behavior of geotechnical structures. The centrifuge modeling technique has a tremendous potential for experimentally determining the behavior of soils and soil structure interaction problems. The prototype stresses and strains are correctly modeled in a centrifuge model by the application of centrifugal acceleration. Past experiments clearly demonstrate the feasibility of performing dynamic centrifuge modeling under earthquake-loading, machine vibration, and blast-loading environments. There are, however, difficulties associated with dynamic centrifuge modeling; some of which can be overcome by performing experiments in large capacity centrifuges. The remaining difficulties require further research and development.
Download or read book Centrifuge Modelling for Civil Engineers written by Gopal Madabhushi and published by CRC Press. This book was released on 2017-09-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solve Complex Ground and Foundation Problems Presenting more than 25 years of teaching and working experience in a wide variety of centrifuge testing, the author of Centrifuge Modelling for Civil Engineers fills a need for information about this field. This text covers all aspects of centrifuge modelling. Expertly explaining the basic principles, the book makes this technique accessible to practicing engineers and researchers. Appeals to Non-Specialists and Specialists Alike Civil engineers that are new to the industry can refer to this material to solve complex geotechnical problems. The book outlines a generalized design process employed for civil engineering projects. It begins with the basics, and then moves on to increasingly complex methods and applications including shallow foundations, retaining walls, pile foundations, tunnelling beneath existing pile foundations, and assessing the stability of buildings and their foundations following earthquake-induced soil liquefaction. It addresses the use of modern imaging technique, data acquisition, and modelling techniques. It explains the necessary signal processing tools that are used to decipher centrifuge test data, and introduces the reader to the specialist aspects of dynamic centrifuge modelling used to study dynamic problems such as blast, wind, or wave loading with emphasis on earthquake engineering including soil liquefaction problems. Introduces the equipment and instrumentation used in centrifuge testing Presents in detail signal processing techniques such as smoothing and filtering Provides example centrifuge data that can be used for sample analysis and interpretation Centrifuge Modelling for Civil Engineers effectively describes the equipment, instrumentation, and signal processing techniques required to make the best use of the centrifuge modelling and test data. This text benefits graduate students, researchers, and practicing civil engineers involved with geotechnical issues.
Download or read book Constitutive and Centrifuge Modelling Two Extremes written by S. Springman and published by CRC Press. This book was released on 2002-01-01 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extremes of constitutive and centrifuge modelling are explored here, with a range of lectures addressing specific areas of these two types of modelling as well as on specific design problems and the themes of failure, deformations and interfaces.
Download or read book Geotechnical Engineering Education and Training written by I Antonescu and published by CRC Press. This book was released on 2020-09-10 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers and reports from the Conference held in Romania, June 2000. The book covers many topics, for example, place, role and content of geotechnical engineering in civil, environmental and earthquake engineering.
Download or read book EKC 2009 Proceedings of EU Korea Conference on Science and Technology written by Joung Hwan Lee and published by Springer Science & Business Media. This book was released on 2010-09-17 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current research fields in science and technology were presented and discussed at the EKC2008, informing about the interests and directions of the scientists and engineers in EU countries and Korea. The Conference has emerged from the idea of bringing together EU and Korea to get to know each other better, especially in fields of science and technology. The focus of the conference is put on the topics: Computational Fluid Dynamics, Mechatronics and Mechanical Engineering, Information and Communications Technology, Life and Natural Sciences, Energy and Environmental Technology.
Download or read book Sustainable Construction Materials and Technologies written by Yoon-Moon Chun and published by CRC Press. This book was released on 2007-05-31 with total page 1756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.
Download or read book Geotechnical Modelling written by David Muir Wood and published by CRC Press. This book was released on 2003-09-02 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.
Download or read book Physical Modelling in Geotechnics written by P. Guo and published by Taylor & Francis. This book was released on 2022-11-22 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers cover topics including: physical modelling facilities; experimental advances; seismic experimental advances; education; soil behaviour; offshore systems; cold regions; geo-environment; dynamics; earthquake effects; and strategies for disaster reduction.
Download or read book Geotechnical Centrifuge Modeling of the Behavior of Light Nonaqueous Phase Liquids LNAPLs in Sand Samples Under Hydraulic Flushing written by Sangkaran Ratnam and published by . This book was released on 1996 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Stress Strain Behavior Measurement Modeling and Analysis written by Hoe I. Ling and published by Springer Science & Business Media. This book was released on 2007-11-28 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material in this work is focused on recent developments in research into the stress-strain behavior of geomaterials, with an emphasis on laboratory measurements, soil constitutive modeling and behavior of soil structures (such as reinforced soils, piles and slopes). The latest advancements in the field, such as the rate effect and dynamic behavior of both clay and sand, behavior of modified soils and soil mixtures, and soil liquefaction are addressed.
Download or read book Proceedings of the 1st International Workshop on Design in Civil and Environmental Engineering written by Mary Kathryn Thompson (Ed.) and published by Mary Kathryn Thompson. This book was released on 2011 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICPMG2014 Physical Modelling in Geotechnics written by Christophe Gaudin and published by CRC Press. This book was released on 2019-01-08 with total page 1366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Physical Modelling in Geotechnics (ICPMG2014) was organised by the Centre for Offshore Foundation Systems at the University of Western Australia under the auspices of the Technical Committee 104 for Physical Modelling in Geotechnics of the International Society of Soil Mechanics and Geotechnical Engineering. This quadrennial conference is the traditional focal point for the physical modelling community of academics, scientists and engineers to present and exchange the latest developments on a wide range of physical modelling aspects associated with geotechnical engineering. These proceedings, together with the seven previous proceedings dating from 1988, present an inestimable collection of the technical and scientific developments and breakthroughs established over the last 25 years. These proceedings include 10 keynote lectures from scientific leaders within the physical modelling community and 160 peer-reviewed papers from 26 countries. They are organised in 14 themes, presenting the latest developments in physical modelling technology, modelling techniques and sensors, through a wide range of soil-structure interaction problems, including shallow and deep foundations, offshore geotechnics, dams and embankments, excavations and retaining structures and slope stability. Fundamental aspects of earthquake engineering, geohazards, ground reinforcements and improvements, and soil properties and behaviour are also covered, demonstrating the increasing complexity of modelling arising from state-of-the-art technological developments and increased understanding of similitude principles. A special theme on education presents the latest developments in the use of physical modelling techniques for instructing undergraduate and postgraduate students in geotechnical engineering.
