Download or read book Engineering Geology and the Environment written by Paul G. Marinos and published by CRC Press. This book was released on 1997 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Aspects of Landfill Design and Construction written by Xuede Qian and published by . This book was released on 2002 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on actual, state-of-the-art design/construction procedures as opposed to a discussion of solid waste management issues and to general descriptions and/or conceptual designs. Provides an integrated package of analytical tools, design equations, and step-by-step construction procedures for all elements of a landfill, giving the reader a better sense of the necessary site investigation, planning, analysis, and organization that go into a landfill design and construction project.The characteristics of landfill containment envelopes and their design/construction are treated in detail. Physico-chemical and engineering properties of solid waste that are relevant and important to landfill design and construction are tabulated and described. Includes explanation of how to evaluate and assess potential problems that affect landfill performance such as sideslope stability, settlement, containment effectiveness, and erosion control. Discusses vertical landfill expansion; how leachate moves across a liner or barrier under both advection and diffusion; compares the containment effectiveness of different liner systems to the combined advective-diffusive transport of dissolved leachate solutes. Includes a detailed explanation with numerical examples and calculations of how to design a gas collection and piping system in a landfill—including the collection and handling of condensate in the gas. Detailed installation and inspection guidelines are provided for both earthen and geosynthetic liner/cover systems—comparing the relative advantages and limitations of each. For professional training courses in Geotechnical and Geoenvironmental Engineering.

Download or read book Geotechnical Engineering of Landfills written by Neil Dixon and published by Thomas Telford. This book was released on 1998-04-08 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings cover a range of issues of direct relevance to geotechnical engineers and associated disciplines working on landfill design, highlight new areas of research and practice, and provide a focus for future research and development.

Download or read book Geotechnical and Environmental Aspects of Waste Disposal Sites written by R.W. Sarsby and published by CRC Press. This book was released on 2006-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the importance of preserving the environment in our developing world, activity involving the extraction of natural resources and the disposal of waste continues to increase. Such operations need to be conducted in a carefully-controlled manner, protecting both the natural environment and the communities who live in the vicinity. Every four years the GREEN (Geotechnics Related to the Environment) symposia are held, recognizing the major contribution that geotechnical engineering makes towards achieving the afore-mentioned goals. The meeting provides an international forum for the exchange of ideas, experiences and innovations. The GREEN 4 meeting discussed engineered disposal of waste in landfills; land contaminated by waste disposal and fluid flows; industrial waste dumps from mineral mining and extraction; and environmental management. The book contains expertise from nineteen countries around the world, and provides an integrated view of the latest research and practice in waste disposal. New and evolving ideas, ongoing concerns and developments throughout the world are discussed.

Download or read book Sustainable Practices for Landfill Design and Operation written by Timothy G. Townsend and published by Springer. This book was released on 2015-07-16 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid waste management is a global concern, and landfilling remains the predominant management method in most areas of the world. This book provides a comprehensive view of state-of-the-art methods to manage landfills more sustainably, drawing upon more than two decades of research, design, and operational experiences at operating sites across the world. Sustainable landfills implement one or multiple technologies to control and enhance the degradation of waste materials to realize a multitude of potential benefits during or shortly after the landfill’s operating phase. This book presents detailed approaches in the development, design, operation, and monitoring of sustainable landfills. Case studies showcasing the benefits and challenges of sustainable landfill technologies are also provided to give the reader additional context. The intent of the book is to serve as a reference guide for regulatory personnel, a practical tool for designers and engineers to build on for site-specific applications of sustainable landfill technologies, and a comprehensive resource for researchers who are continuing to explore new and better ways to more sustainably manage waste materials.

Download or read book Geotechnical Investigations and Improvement of Ground Conditions written by Anjan Patel and published by Woodhead Publishing. This book was released on 2019-01-31 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Investigation and Improvement of Ground Conditions covers practical information on ground improvement and site investigation, considering rock properties and engineering geology and its relation to construction. The book covers geotechnical investigation for construction projects, including classic case studies with geotechnical significance. Additional sections cover soil compaction, soil stabilization, drainage and dewatering, grouting methods, the stone column method, geotextiles, fabrics and earth reinforcement, miscellaneous methods and tools for ground improvement, geotechnical investigation for construction projects, and forensic geotechnical engineering. Final sections present a series of site-specific case studies.

Download or read book Design of Landfills and Integrated Solid Waste Management written by Amalendu Bagchi and published by John Wiley & Sons. This book was released on 2004-02-13 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: By combining integrated solid waste management with the traditional coverage of landfills, this new edition offers the first comprehensive guide to managing the entire solid waste cycle, from collection, to recycling, to eventual disposal. * Includes new material on source reduction, recycling, composting, contamination soil remediation, incineration, and medical waste management. * Presents up-to-date chapters on bioreactor landfills, wetland mitigation, and landfill remediation. * Offers comprehensive coverage of the role of geotechnical engineering in a wide variety of environmental issues.

Download or read book Proceedings of the 5th International Conference on Transportation Geotechnics ICTG 2024 Volume 7 written by Cholachat Rujikiatkamjorn and published by Springer Nature. This book was released on with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 8th International Congress on Environmental Geotechnics Volume 2 written by Liangtong Zhan and published by Springer. This book was released on 2018-10-10 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third volume of the proceedings of the 8th International Congress on Environmental Geotechnics (ICEG 2018), held on October 28 - November 1, 2018 in Hangzhou, China. The theme of the congress is “Towards a Sustainable Geoenvironment”, which means meeting the needs of the present generation without compromising the ability of future generations to meet their own needs. Under this theme, the congress covers a broad range of topics and provides an excellent opportunity for academics, engineers, scientists, government officials, regulators, and planners to present, discuss and exchange notes on the latest advances and developments in the research and application of environmental geotechnics.

Download or read book Geotechnical Hazards written by Z. Lisac and published by CRC Press. This book was released on 2020-12-18 with total page 1765 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions to this volume examine: geotechnical hazard acknowledging the deversity of local ground conditions and environmental factors which play a decisive role in designing engineering structures in Danubian countries.

Download or read book Solid Waste Landfilling written by Raffaello Cossu and published by Elsevier. This book was released on 2018-11-29 with total page 1192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Waste Landfilling: Concepts, Processes, Technology provides information on technologies that promote stabilization and minimize environmental impacts in landfills. As the main challenges in waste management are the reduction and proper treatment of waste and the appropriate use of waste streams, the book satisfies the needs of a modern landfill, covering waste pre-treatment, in situ treatment, long-term behavior, closure, aftercare, environmental impact and sustainability. It is written for practitioners who need specific information on landfill construction and operation, but is also ideal for those concerned about the possible return of these sites to landscapes and their subsequent uses for future generations. - Includes input by international contributors from a vast number of disciplines - Provides worldwide approaches and technologies - Showcases the interdisciplinary nature of the topic - Focuses on sustainability, covering the lifecycle of landfills under the concept of minimizing environmental impact - Presents knowledge of the legal framework and economic aspects of landfilling

Download or read book Waste Management and the Environment VI written by V. Popov and published by WIT Press. This book was released on 2012 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste management can be problematic. Especially with the emphasis in many countries now being on sustainability, there is a great need for more research on disposal methods. While we have found ways to reduce the volume of waste that needs to disposed. questions remain about the environmental and safety aspects of certain recycled materials and the by-products of waste management activities, current technology improvements, and regulatory and monitoring problems. Featuring papers published at the Sixth International Conference on Waste Management and the Environment, this book contains contributions on the topics such as: Advanced Waste Treatment Technology, Wastewater Treatment; Resources Recovery; Waste Incineration and Gasification; Waste Pre-Treatment; Separation and Transformation; Landfills; Soil and Groundwater Clean-up; Public Awareness; Air Pollution Control; Hazardous Waste, Waste Management; Construction and Demolition Waste Costs; Waste Reduction; Reuse and Recycling, Energy from Waste; Electrical Waste; Rare Metals; Computer Modelling; Methodologies and Practices; Risk Assessment; Nuclear Waste; Environmental Economics Assessment; Laws and Regulations; Biological Treatments; Agricultural Wastes.

Download or read book Planning and Urban Design Standards written by American Planning Association and published by John Wiley & Sons. This book was released on 2012-09-17 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new student edition of the definitive reference on urban planning and design Planning and Urban Design Standards, Student Edition is the authoritative and reliable volume designed to teach students best practices and guidelines for urban planning and design. Edited from the main volume to meet the serious student's needs, this Student Edition is packed with more than 1,400 informative illustrations and includes the latest rules of thumb for designing and evaluating any land-use scheme--from street plantings to new subdivisions. Students find real help understanding all the practical information on the physical aspects of planning and urban design they are required to know, including: * Plans and plan making * Environmental planning and management * Building types * Transportation * Utilities * Parks and open space, farming, and forestry * Places and districts * Design considerations * Projections and demand analysis * Impact assessment * Mapping * Legal foundations * Growth management preservation, conservation, and reuse * Economic and real estate development Planning and Urban Design Standards, Student Edition provides essential specification and detailing information for various types of plans, environmental factors and hazards, building types, transportation planning, and mapping and GIS. In addition, expert advice guides readers on practical and graphical skills, such as mapping, plan types, and transportation planning.

Download or read book Proceedings of the National Conference on Advances in Civil Engineering Perspectives of Developing Countries ACEDEC 2003 Structures engineering and geotechnical infrastructure development written by and published by Allied Publishers. This book was released on 2003 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Characterisation and Geoenvironmental Engineering written by V. K. Stalin and published by Springer. This book was released on 2018-07-13 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises selected proceedings of the 2016 annual conference of the Indian Geotechnical Society. The technical papers presented on the theme “Geotechnical Characterisation and Geoenvironmental Engineering” highlight the modified geotechnical properties of soil admixed industrial waste and also the characteristics of soil with different pore fluid under varying test conditions. The major topics covered are (i) characterisation of soils, rocks and synthesised materials and (ii) geoenvironmental engineering and behaviour of unsaturated soil. This book will prove a valuable reference for researchers and practicing engineers alike.

Download or read book Geologic Disposal of Low and Intermediate Level Radioactive Waste written by Roland Pusch and published by CRC Press. This book was released on 2017-04-07 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will address concepts and techniques for preparation and disposal of low- (LLW) and intermediate-level (ILW) radioactive waste from the nuclear industry, the weapons industry, university labs, research institutes, and from the commercial industry. It will aid decision-makers in finding optimal technical/economical solutions, including how site investigations, design, construction, identification and selection of construction materials (clay and concrete), and monitoring can be made. It will also examine techniques for isolating soil and rock contaminated by leaking nuclear plants and from damaged nuclear reactors such as those at the Fukushima and Chernobyl nuclear plants.

Download or read book Designing with Geosynthetics 6Th Edition Vol 1 written by Robert M. Koerner and published by Xlibris Corporation. This book was released on 2012-01-16 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the structure of previous editions, Volume 1 of this Sixth Edition proceeds through four individual chapters on geosynthetics, geotextiles, geogrids and geonets. Volume 2 continues with geomembranes, geosynthetic clay liners, geofoam and geocomposites. The two volumes must accompany one another. All are polymeric materials used for myriad applications in geotechnical, geoenvironmental, transportation, hydraulic and private development applications. The technology has become a worldwide enterprise with approximate $5B material sales in the 35-years since first being introduced. In addition to describing and illustrating the various materials; the most important test methods and design examples are included as pertains to specific application areas. This latest edition differs from previous ones in that sustainability is addressed throughout, new material variations are presented, new applications are included and references are updated accordingly. Each chapter includes problems for which a solutions manual is available.