Download or read book Geomodels in Engineering Geology written by Peter Fookes and published by . This book was released on 2015-10 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a valuable guide to the evaluation and understanding of ground and environmental conditions of sites and their surrounds. This is done through a series of annotated block models and supporting photographs of common geological and geomorphological situations around the world, with basic text explanations and information on each principal block diagram and its annotated photographs. Ground conditions depend on the climatic, geological and geomorphological history of the site and its surrounding area. In ground investigation, ground engineering, design and construction, a preliminary study of the local environment (including climate), the landforms and the geomorphological processes creating and modifying the local landscape is thus required, as well as informed detailed knowledge of the soils and geology, their distribution, properties and engineering behaviour. Geomodels in Engineering Geology outlines the world's climatic and morphological zones and the changes such environments bring upon the ground. It deals with fundamental aspects of surface soils and geology in relation to their engineering behaviour and guides the way that ground investigation can be developed to provide appropriate information needed for design and construction of a project augmented by case histories and experience of practical problems.
Download or read book Geomodels in Engineering Geology written by Peter Fookes and published by Whittles Pub. This book was released on 2015-04-30 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomodels in Engineering Geologyoutlines the world's climatic and morphological zones and the changes such environments bring upon the ground. It deals with fundamental aspects of surface soils and geology in relation to their engineering behavior and guides the way that ground investigation can be developed to provide appropriate information needed for design and construction of a project--augmented by case histories and experience of practical problems. The book provides a valuable systematic guide to the evaluation and understanding of ground and worldwide environmental conditions of sites and their surrounds. This is done through a series of annotated block models and supporting photographs of common geological and geomorphological situations around the world, with basic text explanations and information on each principal block diagram and its annotated photographs. Ground conditions depend on the climatic, geological, and geomorphological history of the site and its surrounding area. In ground investigation, ground engineering, design and construction, a preliminary study of the local environment (including climate), the landforms, and the geomorphological processes creating and modifying the local landscape is thus required, as well as informed detailed knowledge of the soils and geology, their distribution, properties, and engineering behavior. t;/P> Ground conditions depend on the climatic, geological, and geomorphological history of the site and its surrounding area. In ground investigation, ground engineering, design and construction, a preliminary study of the local environment (including climate), the landforms, and the geomorphological processes creating and modifying the local landscape is thus required, as well as informed detailed knowledge of the soils and geology, their distribution, properties, and engineering behavior.
Download or read book Engineering Geology and Geomorphology of Glaciated and Periglaciated Terrains written by J.S. Griffiths and published by Geological Society of London. This book was released on 2017-10-18 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineering Group of the Geological Society Working Party brought together experts in glacial and periglacial geomorphology, Quaternary history, engineering geology and geotechnical engineering to establish best practice when working in former glaciated and periglaciated environments. The Working Party addressed outdated terminology and reviewed the latest academic research to provide an up-to-date understanding of glaciated and periglaciated terrains. This transformative, state-of-the-art volume is the outcome of five years of deliberation and synthesis by the Working Party. This is an essential reference text for practitioners, students and academics working in these challenging ground conditions. The narrative style, and a comprehensive glossary and photo-catalogue of active and relict sediments, structures and landforms make this material relevant and accessible to a wide readership.
Download or read book Geological Engineering written by Luis Gonzalez de Vallejo and published by CRC Press. This book was released on 2011-07-06 with total page 1349 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough knowledge of geology is essential in the design and construction of infrastructures for transport, buildings and mining operations; while an understanding of geology is also crucial for those working in urban, territorial and environmental planning and in the prevention and mitigation of geohazards.Geological Engineering provides an inte
Download or read book Engineering Geomorphology written by P. G. Fookes and published by . This book was released on 2007 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes basic concepts to explain the causes, mechanisms and consequences of landform change. Considers how the land surface works in the context of wetland, flatland, hills, mountains, rivers and coasts; and the engineering techniques available in the field, the laboratory, the office, and in remote sensing.
Download or read book Geomorphology for Engineers written by P. G. Fookes and published by . This book was released on 2005 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomorphological landforms and processes exert a strong influence on surface engineering works, yet comparatively little information on geomorphology is available to engineers. Thoroughly revised and with an improved format, this book presents a broad view of geomorphology, examining near-surface engineering problems associated with various landscapes. Self-contained chapters contributed by leading authorities first address the major factors that control the materials, form, and processes on the Earth's surface. The second section deals with the geomorphological processes that help shape land surfaces and influence their engineering characteristics, and the final section explore environments and landscapes.
Download or read book Hot Deserts written by M. J. Walker and published by Geological Society of London. This book was released on 2012 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an authoritative and comprehensive state-of-the-art review of hot desert terrains in all parts of the world, their geomaterials and influence on civil engineering site investigation, design and construction. It primarily covers conditions and materials in modern hot deserts, but there is also coverage of unmodified ancient desert soils that exhibit engineering behaviour similar to modern desert materials. Thorough and up-to-date guidance on modern field evaluation and ground investigation techniques in hot arid areas is provided, including reference to a new approach to the desert model and detailed specialised assessments of the latest methods for materials characterisation and testing. The volume is based on world-wide experience in hot desert terrain and draws upon the knowledge and expertise of the members of a Geological Society Engineering Group Working Party comprising practising geologists, geomorphologists and civil engineers with a wealth of varied, but complementary experience of working in hot deserts. It is an essential reference book for professionals, as well as a valuable textbook for students. It is written in a style that is accessible to the non-specialist. A comprehensive glossary is also included. The Geological Society of London. Founded in 1807, the Geological Society of London is the oldest geological society in the world, and one of the largest publishers in the Earth sciences. The Society publishes a wide range of high-quality peer-reviewed titles for academics and professionals working in the geosciences, and enjoys an enviable international reputation for the quality of its work.
Download or read book Advances on Testing and Experimentation in Civil Engineering written by Carlos Chastre and published by Springer Nature. This book was released on 2022-08-17 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the recent advances on testing and experimentation in civil engineering, especially in the branches of geotechnics, transportation, hydraulics, and natural resources. It includes advances in physical modelling, monitoring techniques, data acquisition and analysis, and provides an invaluable contribution for the installation of new civil engineering experimental facilities. The first part of the book covers the latest advances in testing and experimentation in key domains of geotechnics: soil mechanics and geotechnical engineering, rock mechanics and rock engineering, and engineering geology. Some of the topics covered include new developments in topographic survey acquisition for applied mapping and in situ geotechnical investigations; laboratory and in situ tests to estimate the relevant parameters needed to model the behaviour of rock masses and land structures; monitoring and inspection techniques designed for offshore wind foundations. The second part of the book highlights the relevance of testing and monitoring in transportation. Full-scale accelerated pavement testing, and instrumentation becomes even more important nowadays when, for sustainability purposes, non-traditional materials are used in road and airfield pavements. Innovation in testing and monitoring pavements and railway tracks is also developed in this part of the book. Intelligent traffic systems are the new traffic management paradigm, and an overview of new solutions is addressed here. Finally, in the third part of the book, trends in the field and laboratory measurements and corresponding data analysis are presented according to the different hydraulic domains addressed in this publication, namely maritime hydraulics, surface water and river hydraulics and urban water.
Download or read book Information Technology in Geo Engineering written by António Gomes Correia and published by Springer Nature. This book was released on 2019-09-24 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings address the latest developments in information communication and technologies for geo-engineering. The 3rd International Conference on Information Technology in Geo-Engineering (ICITG 2019), held in Guimarães, Portugal, follows the previous successful installments of this conference series in Durham (2014) and Shanghai (2010). The respective chapters cover the following: Use of information and communications technologies Big data and databases Data mining and data science Imaging technologies Building information modelling applied to geo-structures Artificial intelligence Smart geomaterials and intelligent construction Sensors and monitoring Asset management Case studies on design, construction and maintenance Given its broad range of coverage, the book will benefit students, educators, researchers and professional practitioners alike, encouraging these readers to help take the geo-engineering community into the digital age
Download or read book Reservoir Model Design written by Philip Ringrose and published by Springer. This book was released on 2014-10-03 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives practical advice and ready to use tips on the design and construction of subsurface reservoir models. The design elements cover rock architecture, petrophysical property modelling, multi-scale data integration, upscaling and uncertainty analysis. Philip Ringrose and Mark Bentley share their experience, gained from over a hundred reservoir modelling studies in 25 countries covering clastic, carbonate and fractured reservoir types. The intimate relationship between geology and fluid flow is explored throughout, showing how the impact of fluid type, production mechanism and the subtleties of single- and multi-phase flow combine to influence reservoir model design. Audience: The main audience for this book is the community of applied geoscientists and engineers involved in the development and use of subsurface fluid resources. The book is suitable for a range of Master’s level courses in reservoir characterisation, modelling and engineering. · Provides practical advice and guidelines for users of 3D reservoir modelling packages · Gives advice on reservoir model design for the growing world-wide activity in subsurface reservoir modelling · Covers rock modelling, property modelling, upscaling and uncertainty handling · Encompasses clastic, carbonate and fractured reservoirs
Download or read book Earth Science for Civil and Environmental Engineers written by Richard E. Jackson and published by Cambridge University Press. This book was released on 2019-01-24 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This carefully targeted and rigorous new textbook introduces engineering students to the fundamental principles of applied Earth science, highlighting how modern soil and rock mechanics, geomorphology, hydrogeology, seismology and environmental geochemistry affect geotechnical and environmental practice. Key geological topics of engineering relevance including soils and sediments, rocks, groundwater, and geologic hazards are presented in an accessible and engaging way. A broad range of international case studies add real-world context, and demonstrate practical applications in field and laboratory settings to guide site characterization. End-of-chapter problems are included for self-study and evaluation, and supplementary online materials include electronic figures, additional examples, solutions, and guidance on useful software. Featuring a detailed glossary introducing key terminology, this text requires no prior geological training and is essential reading for senior undergraduate or graduate students in civil, geological, geotechnical and geoenvironmental engineering. It is also a useful reference and bridge for Earth science graduates embarking on engineering geology courses.
Download or read book Encyclopedia of Geology written by and published by Academic Press. This book was released on 2020-12-16 with total page 5634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Geology, Second Edition presents in six volumes state-of-the-art reviews on the various aspects of geologic research, all of which have moved on considerably since the writing of the first edition. New areas of discussion include extinctions, origins of life, plate tectonics and its influence on faunal provinces, new types of mineral and hydrocarbon deposits, new methods of dating rocks, and geological processes. Users will find this to be a fundamental resource for teachers and students of geology, as well as researchers and non-geology professionals seeking up-to-date reviews of geologic research. Provides a comprehensive and accessible one-stop shop for information on the subject of geology, explaining methodologies and technical jargon used in the field Highlights connections between geology and other physical and biological sciences, tackling research problems that span multiple fields Fills a critical gap of information in a field that has seen significant progress in past years Presents an ideal reference for a wide range of scientists in earth and environmental areas of study
Download or read book The Geometry and Growth of Normal Faults written by C. Childs and published by Geological Society of London. This book was released on 2017-11-06 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Normal faults are the primary structures that accommodate extension of the brittle crust. This volume provides an up-to-date overview of current research into the geometry and growth of normal faults. The 23 research papers present the findings of outcrop and subsurface studies of the geometrical evolution of faults from a number of basins worldwide, complemented by analogue and numerical modelling studies of fundamental aspects of fault kinematics. The topics addressed include how fault length changes with displacement, how faults interact with one another, the controls of previous structure on fault evolution and the nature and origin of fault-related folding. This volume will be of interest to those wishing to develop a better understanding of the structural geological aspects of faulting, from postgraduate students to those working in industry.
Download or read book Spatial Relationships Between Two Georeferenced Variables written by Ronny Vallejos and published by Springer Nature. This book was released on 2020-09-22 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers essential, systematic information on the assessment of the spatial association between two processes from a statistical standpoint. Divided into eight chapters, the book begins with preliminary concepts, mainly concerning spatial statistics. The following seven chapters focus on the methodologies needed to assess the correlation between two or more processes; from theory introduced 35 years ago, to techniques that have only recently been published. Furthermore, each chapter contains a section on R computations to explore how the methodology works with real data. References and a list of exercises are included at the end of each chapter. The assessment of the correlation between two spatial processes has been tackled from several different perspectives in a variety of applications fields. In particular, the problem of testing for the existence of spatial association between two georeferenced variables is relevant for posterior modeling and inference. One evident application in this context is the quantification of the spatial correlation between two images (processes defined on a rectangular grid in a two-dimensional space). From a statistical perspective, this problem can be handled via hypothesis testing, or by using extensions of the correlation coefficient. In an image-processing framework, these extensions can also be used to define similarity indices between images.
Download or read book Geologic Fracture Mechanics written by Richard A. Schultz and published by Cambridge University Press. This book was released on 2019-08-08 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to geologic fracture mechanics covering geologic structural discontinuities from theoretical and field-based perspectives.
Download or read book Fossil Insects written by David Penney and published by Siri Scientific Press. This book was released on 2014-07-31 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Palaeoentomology represents the interface between two huge scientific disciplines: palaeontology – the study of fossils, and entomology – the study of insects. However, fossils rarely feature extensively in books on insects, and likewise, insects rarely feature in books about fossils. Similarly, college or university palaeontology courses rarely have an entomological component and entomology courses do not usually consider the fossil record of insects in any detail. This is not due to a lack of insect fossils. The fossil record of insects is incredibly diverse in terms of taxonomic scope, age range (Devonian to Recent), mode of preservation (amber and rock) and geographical distribution (fossil insects have been recorded from all continents, including Antarctica). In this book the authors aim to help bridge the palaeontology–entomology gap by providing a broadly accessible introduction to some of the best preserved fossil insects from a wide range of deposits from around the globe, many of which are beautifully illustrated by colour photographs. Also covered are insect behaviour and ecology in the fossil record, sub-fossil insects, trace fossils and insect species longevity. Just as insects are useful as ecological indicators today, the same can be expected to be true of the past. Such applications of the insect fossil record are briefly discussed. It is hoped that this book will encourage a few future researchers to enter the fascinating realm of palaeoentomology and to this end there is a section on how to become a palaeoentomologist. However, it is aimed at a much broader audience – those with an interest in fossils and/or insects in general, who will no doubt marvel at the diversity and excellent preservation of the fossils illustrated.
Download or read book Engineering Geology and the Environment written by Paul G. Marinos and published by CRC Press. This book was released on 1997 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth volume of five from the June 1997 conference was much delayed (the first four volumes were published in 1997). It comprises 23 special lectures solicited for the conference on various aspects of problematic soils, natural and man-made hazards, urban and regional planning, waste disposal, mines and quarries, large engineering works, and protection of geological, geographical, historical, and architectural heritage. There is no subject index. Annotation copyrighted by Book News Inc., Portland, OR
