Download or read book Geometrical Methods for the Theory of Linear Systems written by C.I. Byrnes and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lectures contained in this book were presented at Harvard University in June 1979. The workshop at which they were presented was the third such on algebro-geometric methods. The first was held in 1973 in London and the emphasis was largely on geometric methods. The second was held at Ames Research Center-NASA in 1976. There again the emphasis was on geometric methods, but algebraic geometry was becoming a dominant theme. In the two years after the Ames meeting there was tremendous growth in the applications of algebraic geometry to systems theory and it was becoming clear that much of the algebraic systems theory was very closely related to the geometric systems theory. On this basis we felt that this was the right time to devote a workshop to the applications of algebra and algebraic geometry to linear systems theory. The lectures contained in this volume represent all but one of the tutorial lectures presented at the workshop. The lec ture of Professor Murray Wonham is not contained in this volume and we refer the interested to the archival literature. This workshop was jointly sponsored by a grant from Ames Research Center-NASA and a grant from the Advanced Study Institute Program of NATO. We greatly appreciate the financial support rendered by these two organizations. The American Mathematical Society hosted this meeting as part of their Summer Seminars in Applied Mathematics and will publish the companion volume of con tributed papers.
Download or read book Geometrical Methods for the Theory of Linear Systems written by Christopher I. Byrnes and published by . This book was released on 1979 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods of Algebraic Geometry in Control Theory Part I written by Peter Falb and published by Springer. This book was released on 2018-08-25 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: "An introduction to the ideas of algebraic geometry in the motivated context of system theory." Thus the author describes his textbook that has been specifically written to serve the needs of students of systems and control. Without sacrificing mathematical care, the author makes the basic ideas of algebraic geometry accessible to engineers and applied scientists. The emphasis is on constructive methods and clarity rather than abstraction. The student will find here a clear presentation with an applied flavor, of the core ideas in the algebra-geometric treatment of scalar linear system theory. The author introduces the four representations of a scalar linear system and establishes the major results of a similar theory for multivariable systems appearing in a succeeding volume (Part II: Multivariable Linear Systems and Projective Algebraic Geometry). Prerequisites are the basics of linear algebra, some simple notions from topology and the elementary properties of groups, rings, and fields, and a basic course in linear systems. Exercises are an integral part of the treatment and are used where relevant in the main body of the text. The present, softcover reprint is designed to make this classic textbook available to a wider audience. "This book is a concise development of affine algebraic geometry together with very explicit links to the applications...[and] should address a wide community of readers, among pure and applied mathematicians." —Monatshefte für Mathematik
Download or read book Geometrical Methods in the Theory of Ordinary Differential Equations written by V.I. Arnold and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book, geometrical methods in the theory of ordinary differential equations have become very popular and some progress has been made partly with the help of computers. Much of this progress is represented in this revised, expanded edition, including such topics as the Feigenbaum universality of period doubling, the Zoladec solution, the Iljashenko proof, the Ecalle and Voronin theory, the Varchenko and Hovanski theorems, and the Neistadt theory. In the selection of material for this book, the author explains basic ideas and methods applicable to the study of differential equations. Special efforts were made to keep the basic ideas free from excessive technicalities. Thus the most fundamental questions are considered in great detail, while of the more special and difficult parts of the theory have the character of a survey. Consequently, the reader needs only a general mathematical knowledge to easily follow this text. It is directed to mathematicians, as well as all users of the theory of differential equations.
Download or read book Geometric Methods in System Theory written by D.Q. Mayne and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometric Methods in System Theory In automatic control there are a large number of applications of a fairly simple type for which the motion of the state variables is not free to evolve in a vector space but rather must satisfy some constraints. Examples are numerous; in a switched, lossless electrical network energy is conserved and the state evolves on an ellipsoid surface defined by x'Qx equals a constant; in the control of finite state, continuous time, Markov processes the state evolves on the set x'x = 1, xi ~ O. The control of rigid body motions and trajectory control leads to problems of this type. There has been under way now for some time an effort to build up enough control theory to enable one to treat these problems in a more or less routine way. It is important to emphasise that the ordinary vector space-linear theory often gives the wrong insight and thus should not be relied upon.
Download or read book Algebraic and Geometric Methods in Linear Systems Theory written by Christopher I. Byrnes and published by American Mathematical Soc.. This book was released on 1980 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods of Algebraic Geometry in Control Theory Part II written by Peter Falb and published by Springer. This book was released on 2018-09-14 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: "An introduction to the ideas of algebraic geometry in the motivated context of system theory." This describes this two volume work which has been specifically written to serve the needs of researchers and students of systems, control, and applied mathematics. Without sacrificing mathematical rigor, the author makes the basic ideas of algebraic geometry accessible to engineers and applied scientists. The emphasis is on constructive methods and clarity rather than on abstraction. While familiarity with Part I is helpful, it is not essential, since a considerable amount of relevant material is included here. Part I, Scalar Linear Systems and Affine Algebraic Geometry, contains a clear presentation, with an applied flavor , of the core ideas in the algebra-geometric treatment of scalar linear system theory. Part II extends the theory to multivariable systems. After delineating limitations of the scalar theory through carefully chosen examples, the author introduces seven representations of a multivariable linear system and establishes the major results of the underlying theory. Of key importance is a clear, detailed analysis of the structure of the space of linear systems including the full set of equations defining the space. Key topics also covered are the Geometric Quotient Theorem and a highly geometric analysis of both state and output feedback. Prerequisites are the basics of linear algebra, some simple topological notions, the elementary properties of groups, rings, and fields, and a basic course in linear systems. Exercises, which are an integral part of the exposition throughout, combined with an index and extensive bibliography of related literature make this a valuable classroom tool or good self-study resource. The present, softcover reprint is designed to make this classic textbook available to a wider audience. "The exposition is extremely clear. In order to motivate the general theory, the author presents a number of examples of two or three input-, two-output systems in detail. I highly recommend this excellent book to all those interested in the interplay between control theory and algebraic geometry." —Publicationes Mathematicae, Debrecen "This book is the multivariable counterpart of Methods of Algebraic Geometry in Control Theory, Part I.... In the first volume the simpler single-input–single-output time-invariant linear systems were considered and the corresponding simpler affine algebraic geometry was used as the required prerequisite. Obviously, multivariable systems are more difficult and consequently the algebraic results are deeper and less transparent, but essential in the understanding of linear control theory.... Each chapter contains illustrative examples throughout and terminates with some exercises for further study." —Mathematical Reviews
Download or read book Twistor Geometry and Non Linear Systems written by H.D. Doebner and published by Springer. This book was released on 2006-11-14 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods of Algebraic Geometry in Control Theory Part I written by Peter Falb and published by Birkhäuser. This book was released on 2013-09-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control theory represents an attempt to codify, in mathematical terms, the principles and techniques used in the analysis and design of control systems. Algebraic geometry may, in an elementary way, be viewed as the study of the structure and properties of the solutions of systems of algebraic equations. The aim of these notes is to provide access to the methods of algebraic geometry for engineers and applied scientists through the motivated context of control theory. I began the development of these notes over fifteen years ago with a series of lectures given to the Control Group at the Lund Institute of Technology in Sweden. Over the following years, I presented the material in courses at Brown several times and must express my appreciation for the feedback (sic!) received from the students. I have attempted throughout to strive for clarity, often making use of constructive methods and giving several proofs of a particular result. Since algebraic geometry draws on so many branches of mathematics and can be dauntingly abstract, it is not easy to convey its beauty and utility to those interested in applications. I hope at least to have stirred the reader to seek a deeper understanding of this beauty and utility in control theory. The first volume dea1s with the simplest control systems (i. e. single input, single output linear time-invariant systems) and with the simplest algebraic geometry (i. e. affine algebraic geometry).
Download or read book Max linear Systems Theory and Algorithms written by Peter Butkovič and published by Springer Science & Business Media. This book was released on 2010-08-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen a significant rise of interest in max-linear theory and techniques. Specialised international conferences and seminars or special sessions devoted to max-algebra have been organised. This book aims to provide a first detailed and self-contained account of linear-algebraic aspects of max-algebra for general (that is both irreducible and reducible) matrices. Among the main features of the book is the presentation of the fundamental max-algebraic theory (Chapters 1-4), often scattered in research articles, reports and theses, in one place in a comprehensive and unified form. This presentation is made with all proofs and in full generality (that is for both irreducible and reducible matrices). Another feature is the presence of advanced material (Chapters 5-10), most of which has not appeared in a book before and in many cases has not been published at all. Intended for a wide-ranging readership, this book will be useful for anyone with basic mathematical knowledge (including undergraduate students) who wish to learn fundamental max-algebraic ideas and techniques. It will also be useful for researchers working in tropical geometry or idempotent analysis.
Download or read book Topics in the Geometric Theory of Linear Systems written by Robert Hermann and published by . This book was released on 1984 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Systems Models and Feedback Theory and Applications written by A. Isidori and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a great honor and privilege to have this opportunity of celebrating the 65th birthday of Professor Antonio Ruberti by holding an International Conference on Systems, Models and Feedback. The conference, and this volume which contains its proceedings, is a tribute to Professor Ruberti in acknowledgement of his major contributions to System Theory, at a time in which this area was emerging and consolidat ing as an independent discipline, his role as a leader of the Italian academic community, his activity in promoting and fostering close scientific relations between Italian and U.S. scholars in Systems and Control. The format of this conference is inspired by a series of seminars initi ated exactly twenty years ago under the direction of Professor Ruberti, in Italy, and Professor R. R. Mohler, in the U.S. By bringing together many authoritative talents from both countries, these seminars were instrumental in promoting the expansion of System Theory in new areas, notably that of Nonlinear Control, and were the key to successful scientific careers for many of the younger attendants.
Download or read book Control Theory for Linear Systems written by Harry L. Trentelman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Theory for Linear Systems deals with the mathematical theory of feedback control of linear systems. It treats a wide range of control synthesis problems for linear state space systems with inputs and outputs. The book provides a treatment of these problems using state space methods, often with a geometric flavour. Its subject matter ranges from controllability and observability, stabilization, disturbance decoupling, and tracking and regulation, to linear quadratic regulation, H2 and H-infinity control, and robust stabilization. Each chapter of the book contains a series of exercises, intended to increase the reader's understanding of the material. Often, these exercises generalize and extend the material treated in the regular text.
Download or read book Control Theory from the Geometric Viewpoint written by Andrei A. Agrachev and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some facts and methods of the Mathematical Control Theory treated from the geometric point of view. The book is mainly based on graduate courses given by the first coauthor in the years 2000-2001 at the International School for Advanced Studies, Trieste, Italy. Mathematical prerequisites are reduced to standard courses of Analysis and Linear Algebra plus some basic Real and Functional Analysis. No preliminary knowledge of Control Theory or Differential Geometry is required. What this book is about? The classical deterministic physical world is described by smooth dynamical systems: the future in such a system is com pletely determined by the initial conditions. Moreover, the near future changes smoothly with the initial data. If we leave room for "free will" in this fatalistic world, then we come to control systems. We do so by allowing certain param eters of the dynamical system to change freely at every instant of time. That is what we routinely do in real life with our body, car, cooker, as well as with aircraft, technological processes etc. We try to control all these dynamical systems! Smooth dynamical systems are governed by differential equations. In this book we deal only with finite dimensional systems: they are governed by ordi nary differential equations on finite dimensional smooth manifolds. A control system for us is thus a family of ordinary differential equations. The family is parametrized by control parameters.
Download or read book Geometrical Methods of Mathematical Physics written by Bernard F. Schutz and published by Cambridge University Press. This book was released on 1980-01-28 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the methods of modern differential geometry have become of considerable importance in theoretical physics and have found application in relativity and cosmology, high-energy physics and field theory, thermodynamics, fluid dynamics and mechanics. This textbook provides an introduction to these methods - in particular Lie derivatives, Lie groups and differential forms - and covers their extensive applications to theoretical physics. The reader is assumed to have some familiarity with advanced calculus, linear algebra and a little elementary operator theory. The advanced physics undergraduate should therefore find the presentation quite accessible. This account will prove valuable for those with backgrounds in physics and applied mathematics who desire an introduction to the subject. Having studied the book, the reader will be able to comprehend research papers that use this mathematics and follow more advanced pure-mathematical expositions.
Download or read book Solving Linear Systems written by Zbigniew Ignacy Woźnicki and published by . This book was released on 2009 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometrical Methods in the Theory of Ordinary Differential Equations written by V. I. Arnold and published by Springer. This book was released on 1983-04-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newton's fundamental discovery, the one which he considered necessary to keep secret and published only in the form of an anagram, consists of the following: Data aequatione quotcunque jluentes quantitae involvente jluxiones invenire et vice versa. In contemporary mathematical language, this means: "It is useful to solve differential equations". At present, the theory of differential equations represents a vast con glomerate of a great many ideas and methods of different nature, very useful for many applications and constantly stimulating theoretical in vestigations in all areas of mathematics. Many of the routes connecting abstract mathematical theories to appli cations in the natural sciences lead through differential equations. Many topics of the theory of differential equations grew so much that they became disciplines in themselves; problems from the theory of differential equations had great significance in the origins of such disciplines as linear algebra, the theory of Lie groups, functional analysis, quantum mechanics, etc. Consequently, differential equations lie at the basis of scientific mathematical philosophy (Weltanschauung). In the selection of material for this book, the author intended to expound basic ideas and methods applicable to the study of differential equations. Special efforts were made to keep the basic ideas (which are, as a rule, simple and intuitive) free from technical details. The most fundamental and simple questions are considered in the greatest detail, whereas the exposition of the more special and difficult parts of the theory has been given the character of a survey.
