Download or read book Geometric Method for Stability of Non Linear Elastic Thin Shells written by Jordanka Ivanova and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: PREFACE This book deals with the new developments and applications of the geometric method to the nonlinear stability problem for thin non-elastic shells. There are no other published books on this subject except the basic ones of A. V. Pogorelov (1966,1967,1986), where variational principles defined over isometric surfaces, are postulated, and applied mainly to static and dynamic problems of elastic isotropic thin shells. A. V. Pogorelov (Harkov, Ukraine) was the first to provide in his monographs the geometric construction of the deformed shell surface in a post-critical stage and deriving explicitely the asymptotic formulas for the upper and lower critical loads. In most cases, these formulas were presented in a closed analytical form, and confirmed by experimental data. The geometric method by Pogorelov is one of the most important analytical methods developed during the last century. Its power consists in its ability to provide a clear geometric picture of the postcritical form of a deformed shell surface, successfully applied to a direct variational approach to the nonlinear shell stability problems. Until now most Pogorelov's monographs were written in Russian, which limited the diffusion of his ideas among the international scientific community. The present book is intended to assist and encourage the researches in this field to apply the geometric method and the related results to everyday engineering practice.
Download or read book Stability of Nonlinear Shells written by D. Shilkrut and published by Elsevier. This book was released on 2002-06-18 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability of NonLinear Shells is a compilation of the author's work on analyzing the behaviour of spherical caps and related shell structures under various (axisymmetric) load systems. Differing from other texts on shells of revolution, it is one of the first attempts to deal with effects of multi-parameter load systems. This extension leads to the discovery of some new, hitherto unknown phenomena exhibited by these structures. In addition, the book presents a novel way to characterize properties of solutions of the governing equations for spherical caps - a classification anchored in a theory called reciprocal systems. The author has introduced a deformation map, a projection of multi-dimensional solutions to two-dimensional graphs, to enable analysts to gain insight into the physical meaning of the results obtained. Numerous examples illustrate the concepts introduced. This book also comes to grips with many misconceptions existing in engineering literature about the question of the stability of solutions.
Download or read book Non linear Theory of Thin Elastic Shells written by Kh. M. Mushtari and published by . This book was released on 1961 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Analysis of Structures 1997 written by Muthukrishnan Sathyamoorthy and published by CRC Press. This book was released on 2017-11-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Analysis of Structures presents a complete evaluation of the nonlinear static and dynamic behavior of beams, rods, plates, trusses, frames, mechanisms, stiffened structures, sandwich plates, and shells. These elements are important components in a wide variety of structures and vehicles such as spacecraft and missiles, underwater vessels and structures, and modern housing. Today's engineers and designers must understand these elements and their behavior when they are subjected to various types of loads. Coverage includes the various types of nonlinearities, stress-strain relations and the development of nonlinear governing equations derived from nonlinear elastic theory. This complete guide includes both mathematical treatment and real-world applications, with a wealth of problems and examples to support the text. Special topics include a useful and informative chapter on nonlinear analysis of composite structures, and another on recent developments in symbolic computation. Designed for both self-study and classroom instruction, Nonlinear Analysis of Structures is also an authoritative reference for practicing engineers and scientists. One of the world's leaders in the study of nonlinear structural analysis, Professor Sathyamoorthy has made significant research contributions to the field of nonlinear mechanics for twenty-seven years. His foremost contribution to date has been the development of a unique transverse shear deformation theory for plates undergoing large amplitude vibrations and the examination of multiple mode solutions for plates. In addition to his notable research, Professor Sathyamoorthy has also developed and taught courses in the field at universities in India, Canada, and the United States.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Problems of Nonlinear Deformation written by E.I. Grigolyuk and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in nonlinear problems in mechanics has been revived and intensified by the capacity of digital computers. Consequently, a question offundamental importance is the development of solution procedures which can be applied to a large class of problems. Nonlinear problems with a parameter constitute one such class. An important aspect of these problems is, as a rule, a question of the variation of the solution when the parameter is varied. Hence, the method of continuing the solution with respect to a parameter is a natural and, to a certain degree, universal tool for analysis. This book includes details of practical problems and the results of applying this method to a certain class of nonlinear problems in the field of deformable solid mechanics. In the Introduction, two forms of the method are presented, namely continu ous continuation, based on the integration of a Cauchy problem with respect to a parameter using explicit schemes, and discrete continuation, implementing step wise processes with respect to a parameter with the iterative improvement of the solution at each step. Difficulties which arise in continuing the solution in the neighbourhood of singular points are discussed and the problem of choosing the continuation parameter is formulated.
Download or read book Building Information Modeling written by Nawari O. Nawari and published by CRC Press. This book was released on 2015-05-01 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: BIM for Structural Engineering and Architecture Building Information Modeling: Framework for Structural Design outlines one of the most promising new developments in architecture, engineering, and construction (AEC). Building information modeling (BIM) is an information management and analysis technology that is changing the role of computation in the architectural and engineering industries. The innovative process constructs a database assembling all of the objects needed to build a specific structure. Instead of using a computer to produce a series of drawings that together describe the building, BIM creates a single illustration representing the building as a whole. This book highlights the BIM technology and explains how it is redefining the structural analysis and design of building structures. BIM as a Framework Enabler This book introduces a new framework—the structure and architecture synergy framework (SAS framework)—that helps develop and enhance the understanding of the fundamental principles of architectural analysis using BIM tools. Based upon three main components: the structural melody, structural poetry, and structural analysis, along with the BIM tools as the frame enabler, this new framework allows users to explore structural design as an art while also factoring in the principles of engineering. The framework stresses the influence structure can play in form generation and in defining spatial order and composition. By highlighting the interplay between architecture and structure, the book emphasizes the conceptual behaviors of structural systems and their aesthetic implications and enables readers to thoroughly understand the art and science of whole structural system concepts. Presents the use of BIM technology as part of a design process or framework that can lead to a more comprehensive, intelligent, and integrated building design Places special emphasis on the application of BIM technology for exploring the intimate relationship between structural engineering and architectural design Includes a discussion of current and emerging trends in structural engineering practice and the role of the structural engineer in building design using new BIM technologies Building Information Modeling: Framework for Structural Design provides a thorough understanding of architectural structures and introduces a new framework that revolutionizes the way building structures are designed and constructed.
Download or read book Elasticity and Geometry written by Basile Audoly and published by Oxford University Press. This book was released on 2010-06-24 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: We experience elasticity everywhere in everyday life. This book covers several modern aspects of the established field of elasticity theory, applying general methods of classical analysis including advanced nonlinear aspects to derive detailed solutions to specific problems. It can serve as an introduction to nonlinear methods in science.
Download or read book The Nonlinear Theory of Elastic Shells written by A. Libai and published by Elsevier. This book was released on 2012-12-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nonlinear Theory of Elastic Shells: One Spatial Dimension presents the foundation for the nonlinear theory of thermoelastic shells undergoing large strains and large rotations. This book discusses several relatively simple equations for practical application. Organized into six chapters, this book starts with an overview of the description of nonlinear elastic shell. This text then discusses the foundation of three-dimensional continuum mechanics that are relevant to the shell theory approach. Other chapters cover several topics, including birods, beamshells, and axishells that begins with a derivation of the equations of motion by a descent from the equations of balance of linear and rotational momentum of a three-dimensional material continuum. This book discusses as well the approach to deriving complete field equations for one- or two-dimensional continua from the integral equations of motion and thermodynamics of a three-dimensional continuum. The final chapter deals with the analysis of unishells. This book is a valuable resource for physicists, mathematicians, and scientists.
Download or read book Nonlinear Computational Solid Mechanics written by Jamshid Ghaboussi and published by CRC Press. This book was released on 2017-07-06 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals of nonlinear mechanics within a modern computational approach based mainly on finite element methods. Both material and geometric nonlinearities are treated. The topics build up from the mechanics of finite deformation of solid bodies through to nonlinear structural behaviour including buckling, bifurcation and snap-through. The principles are illustrated with a series of solved problems. This book serves as a text book for a second year graduate course and as a reference for practitioners using nonlinear analysis in engineering and design.
Download or read book Nonlinear Behaviour and Stability of Thin Walled Shells written by Natalia I. Obodan and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the nonlinear behaviour of thin-wall shells (single- and multilayered with delamination areas) under various uniform and non-uniform loadings. The dependence of critical (buckling) load upon load variability is revealed to be highly non-monotonous, showing minima when load variability is close to the eigenmode variabilities of solution branching points of the respective nonlinear boundary problem. A novel numerical approach is employed to analyze branching points and to build primary, secondary, and tertiary bifurcation paths of the nonlinear boundary problem for the case of uniform loading. The load levels of singular points belonging to the paths are considered to be critical load estimates for the case of non-uniform loadings.
Download or read book Buckling of Shell Structures on Land in the Sea and in the Air written by J.F. Jullien and published by CRC Press. This book was released on 1991-09-09 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides better inputs for improvement of the buckling load predictions of stiffened cylindrical shells subjected to combined loading. It is based on the International Colloquium Buckling of shell structures, on land, in the sea and in the air, Lyon, France, 17 September 1991.
Download or read book Hydrostatically Loaded Structures written by W.A. Nash and published by Elsevier. This book was released on 1995-10-27 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powered submersibles have enabled the exploration of lake and ocean depths, and are used extensively for inspection of drilling rigs and offshore pipelines. Their potential for the discovery of undersea mineral resources is widely acknowledged. The design of such vehicles poses many problems not encountered with land-based systems: for example, normal pressures are very large, and many structural elements are extremely sensitive to initial geometric imperfections. Following a review of the history and development of submersibles, each chapter concentrates on a specific geometric design. The bibliography is unusually complete, and includes summaries of many referenced publications. This unique book covers all aspects of the structural mechanics, analysis and design of submersibles, and will be invaluable to ocean engineers, naval architects and graduate students entering the field.
Download or read book Mathematical Reviews written by and published by . This book was released on 2007 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shell Structures Theory and Applications written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2013-09-18 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology and everyday life. Examples are automobile bodies, water and oil tanks, pipelines, aircraft fuselages, nanotubes, graphene sheets or beer cans. Also nature is full of living shells such as leaves of trees, blooming flowers, seashells, cell membranes, the double helix of DNA or wings of insec
Download or read book Resolution Of The Twentieth Century Conundrum In Elastic Stability written by Isaac E Elishakoff and published by World Scientific. This book was released on 2014-05-29 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been stability theories developed for beams, plates and shells — the most significant elements in mechanical, aerospace, ocean and marine engineering. For beams and plates, the theoretical and experimental values of buckling loads are in close vicinity. However for thin shells, the experimental predictions do not conform with the theory, due to presence of small geometric imperfections that are deviations from the ideal shape.This fact has been referred to in the literature as ‘embarrassing’, ‘paradoxical’ and ‘perplexing’. Indeed, the popular adage, “In theory there is no difference between theory and practice. In practice there is”, very much applies to thin shells whose experimental buckling loads may constitute a small fraction of the theoretical prediction based on classical linear theory; because in practice, engineers use knockdown factors that are not theoretically substantiated.This book presents a uniform approach that tames this prima-donna-like and capricious behavior of structures that has been dubbed the ‘imperfection sensitivity’ — thus resolving the conundrum that has occupied the best minds of elastic stability throughout the twentieth century.
