Download or read book Geometric Aspects of Analysis and Mechanics written by Erik P. van den Ban and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hans Duistermaat, an influential geometer-analyst, made substantial contributions to the theory of ordinary and partial differential equations, symplectic, differential, and algebraic geometry, minimal surfaces, semisimple Lie groups, mechanics, mathematical physics, and related fields. Written in his honor, the invited and refereed articles in this volume contain important new results as well as surveys in some of these areas, clearly demonstrating the impact of Duistermaat's research and, in addition, exhibiting interrelationships among many of the topics.
Download or read book Geometric Mechanics written by Richard Talman and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics for the nonmathematician-a modern approach For physicists, mechanics is quite obviously geometric, yet the classical approach typically emphasizes abstract, mathematical formalism. Setting out to make mechanics both accessible and interesting for nonmathematicians, Richard Talman uses geometric methods to reveal qualitative aspects of the theory. He introduces concepts from differential geometry, differential forms, and tensor analysis, then applies them to areas of classical mechanics as well as other areas of physics, including optics, crystal diffraction, electromagnetism, relativity, and quantum mechanics. For easy reference, Dr. Talman treats separately Lagrangian, Hamiltonian, and Newtonian mechanics-exploring their geometric structure through vector fields, symplectic geometry, and gauge invariance respectively. Practical perturbative methods of approximation are also developed. Geometric Mechanics features illustrative examples and assumes only basic knowledge of Lagrangian mechanics. Of related interest . . . APPLIED DYNAMICS With Applications to Multibody and Mechatronic Systems Francis C. Moon A contemporary look at dynamics at an intermediate level, including nonlinear and chaotic dynamics. 1998 (0-471-13828-2) 504 pp. MATHEMATICAL PHYSICS Applied Mathematics for Scientists and Engineers Bruce Kusse and Erik Westwig A comprehensive treatment of the mathematical methods used to solve practical problems in physics and engineering. 1998 (0-471-15431-8) 680 pp.
Download or read book Geometric Mechanics on Riemannian Manifolds written by Ovidiu Calin and published by Springer Science & Business Media. This book was released on 2006-03-15 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: * A geometric approach to problems in physics, many of which cannot be solved by any other methods * Text is enriched with good examples and exercises at the end of every chapter * Fine for a course or seminar directed at grad and adv. undergrad students interested in elliptic and hyperbolic differential equations, differential geometry, calculus of variations, quantum mechanics, and physics
Download or read book Geometric Mechanics written by Waldyr M. Oliva and published by Springer Science & Business Media. This book was released on 2002-10-23 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometric Mechanics here means mechanics on a pseudo-riemannian manifold and the main goal is the study of some mechanical models and concepts, with emphasis on the intrinsic and geometric aspects arising in classical problems. The first seven chapters are written in the spirit of Newtonian Mechanics while the last two ones as well as two of the four appendices describe the foundations and some aspects of Special and General Relativity. All the material has a coordinate free presentation but, for the sake of motivation, many examples and exercises are included in order to exhibit the desirable flavor of physical applications.
Download or read book Mathematical Methods of Classical Mechanics written by V.I. Arnol'd and published by Springer Science & Business Media. This book was released on 2013-04-09 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constructs the mathematical apparatus of classical mechanics from the beginning, examining basic problems in dynamics like the theory of oscillations and the Hamiltonian formalism. The author emphasizes geometrical considerations and includes phase spaces and flows, vector fields, and Lie groups. Discussion includes qualitative methods of the theory of dynamical systems and of asymptotic methods like averaging and adiabatic invariance.
Download or read book Methods of Differential Geometry in Analytical Mechanics written by M. de León and published by Elsevier. This book was released on 2011-08-18 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The differential geometric formulation of analytical mechanics not only offers a new insight into Mechanics, but also provides a more rigorous formulation of its physical content from a mathematical viewpoint. Topics covered in this volume include differential forms, the differential geometry of tangent and cotangent bundles, almost tangent geometry, symplectic and pre-symplectic Lagrangian and Hamiltonian formalisms, tensors and connections on manifolds, and geometrical aspects of variational and constraint theories. The book may be considered as a self-contained text and only presupposes that readers are acquainted with linear and multilinear algebra as well as advanced calculus.
Download or read book Geometric Continuum Mechanics written by Reuven Segev and published by Springer Nature. This book was released on 2020-05-13 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume explores the applications of various topics in modern differential geometry to the foundations of continuum mechanics. In particular, the contributors use notions from areas such as global analysis, algebraic topology, and geometric measure theory. Chapter authors are experts in their respective areas, and provide important insights from the most recent research. Organized into two parts, the book first covers kinematics, forces, and stress theory, and then addresses defects, uniformity, and homogeneity. Specific topics covered include: Global stress and hyper-stress theories Applications of de Rham currents to singular dislocations Manifolds of mappings for continuum mechanics Kinematics of defects in solid crystals Geometric Continuum Mechanics will appeal to graduate students and researchers in the fields of mechanics, physics, and engineering who seek a more rigorous mathematical understanding of the area. Mathematicians interested in applications of analysis and geometry will also find the topics covered here of interest.
Download or read book Dynamical and Geometric Aspects of Hamilton Jacobi and Linearized Monge Amp re Equations written by Hiroyoshi Mitake and published by Springer. This book was released on 2017-06-14 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consisting of two parts, the first part of this volume is an essentially self-contained exposition of the geometric aspects of local and global regularity theory for the Monge–Ampère and linearized Monge–Ampère equations. As an application, we solve the second boundary value problem of the prescribed affine mean curvature equation, which can be viewed as a coupling of the latter two equations. Of interest in its own right, the linearized Monge–Ampère equation also has deep connections and applications in analysis, fluid mechanics and geometry, including the semi-geostrophic equations in atmospheric flows, the affine maximal surface equation in affine geometry and the problem of finding Kahler metrics of constant scalar curvature in complex geometry. Among other topics, the second part provides a thorough exposition of the large time behavior and discounted approximation of Hamilton–Jacobi equations, which have received much attention in the last two decades, and a new approach to the subject, the nonlinear adjoint method, is introduced. The appendix offers a short introduction to the theory of viscosity solutions of first-order Hamilton–Jacobi equations.
Download or read book Symplectic Geometry and Analytical Mechanics written by P. Libermann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approach your problems from the right end It isn't that they can't see the solution. and begin with the answers. Then one day, It is that they can't see the problem. perhaps you will find the final question. G. K. Chesterton. The Scandal of Father 'The Hermit Clad in Crane Feathers' Brown 'The point of a Pin'. in R. van Gulik's The Chinese Maze Murders. Growing specialization and diversification have brought a host of monographs and textbooks on increasingly specialized topics. However, the "tree" of knowledge of mathematics and related fields does not grow only by putting forth new branches. It also happens, quite often in fact, that branches which were thouglit to be completely disparate are suddenly seen to be related. Further, the kind and level of sophistication of mathematics applied in various sci ences has changed drastically in recent years: measure theory is used (non-trivially) in re gional and theoretical economics; algebraic geometry interacts with physics; the Minkowsky lemma, coding theory and the structure of water meet one another in packing and covering theory; quantum fields, crystal defects and mathematical programming profit from homo topy theory; Lie algebras are relevant to filtering; and prediction and electrical engineering can use Stein spaces.
Download or read book Mechanics Analysis and Geometry 200 Years after Lagrange written by M. Francaviglia and published by Elsevier. This book was released on 2012-12-02 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a logically balanced and authoritative account of the different branches and problems of mathematical physics that Lagrange studied and developed, this volume presents up-to-date developments in differential goemetry, dynamical systems, the calculus of variations, and celestial and analytical mechanics.
Download or read book Q Analysis on Euclidean Spaces written by Jie Xiao and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-03-18 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting with the fundamentals of Qα spaces and their relationships to Besov spaces, this book presents all major results around Qα spaces obtained in the past 16 years. The applications of Qα spaces in the study of the incompressible Navier-Stokes system and its stationary form are also discussed. This self-contained book can be used as an essential reference for researchers and graduates in analysis and partial differential equations.
Download or read book Differential Geometry with Applications to Mechanics and Physics written by Yves Talpaert and published by CRC Press. This book was released on 2000-09-12 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to differential geometry with applications to mechanics and physics. It covers topology and differential calculus in banach spaces; differentiable manifold and mapping submanifolds; tangent vector space; tangent bundle, vector field on manifold, Lie algebra structure, and one-parameter group of diffeomorphisms; exterior differential forms; Lie derivative and Lie algebra; n-form integration on n-manifold; Riemann geometry; and more. It includes 133 solved exercises.
Download or read book Geometry Mechanics and Dynamics written by Dong Eui Chang and published by Springer. This book was released on 2015-04-16 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates the broad range of Jerry Marsden’s mathematical legacy in areas of geometry, mechanics, and dynamics, from very pure mathematics to very applied, but always with a geometric perspective. Each contribution develops its material from the viewpoint of geometric mechanics beginning at the very foundations, introducing readers to modern issues via illustrations in a wide range of topics. The twenty refereed papers contained in this volume are based on lectures and research performed during the month of July 2012 at the Fields Institute for Research in Mathematical Sciences, in a program in honor of Marsden's legacy. The unified treatment of the wide breadth of topics treated in this book will be of interest to both experts and novices in geometric mechanics. Experts will recognize applications of their own familiar concepts and methods in a wide variety of fields, some of which they may never have approached from a geometric viewpoint. Novices may choose topics that interest them among the various fields and learn about geometric approaches and perspectives toward those topics that will be new for them as well.
Download or read book Geometric Control of Mechanical Systems written by Francesco Bullo and published by Springer. This book was released on 2019-06-12 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: The area of analysis and control of mechanical systems using differential geometry is flourishing. This book collects many results over the last decade and provides a comprehensive introduction to the area.
Download or read book Global Analysis written by Ilka Agricola and published by American Mathematical Soc.. This book was released on 2002 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The final third of the book applies the mathematical ideas to important areas of physics: Hamiltonian mechanics, statistical mechanics, and electrodynamics." "There are many classroom-tested exercises and examples with excellent figures throughout. The book is ideal as a text for a first course in differential geometry, suitable for advanced undergraduates or graduate students in mathematics or physics."--BOOK JACKET.
Download or read book Tensor and Vector Analysis written by A.T. Fomenko and published by CRC Press. This book was released on 1998-11-26 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the significant contributions of Russian mathematicians to the field, this book contains a selection of papers on tensor and vector analysis. It is divided into three parts, covering Hamiltonian systems, Riemannian geometry and calculus of variations, and topology. The range of applications of these topics is very broad, as many modern geometrical problems recur across a wide range of fields, including mechanics and physics as well as mathematics. Many of the approaches to problems presented in this volume will be novel to the Western reader, although questions are of global interest. The main achievements of the Russian school are placed in the context of the development of each individual subject.
Download or read book Geometric Control and Numerical Aspects of Nonholonomic Systems written by Jorge Cortés Monforte and published by Springer. This book was released on 2004-10-19 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonholonomic systems are a widespread topic in several scientific and commercial domains, including robotics, locomotion and space exploration. This work sheds new light on this interdisciplinary character through the investigation of a variety of aspects coming from several disciplines. The main aim is to illustrate the idea that a better understanding of the geometric structures of mechanical systems unveils new and unknown aspects to them, and helps both analysis and design to solve standing problems and identify new challenges. In this way, separate areas of research such as Classical Mechanics, Differential Geometry, Numerical Analysis or Control Theory are brought together in this study of nonholonomic systems.
