Download or read book Geomechanics of Horizontally drilled Stress sensitive Naturally fractured Reservoirs written by and published by . This book was released on 1994 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizontal drilling is a viable approach for accessing hydrocarbons in many types of naturally-fractured reservoirs. Cost-effective improvements in the technology to drill, complete, and produce horizontal wells in difficult geologic environments require a better understanding of the mechanical and fluid-flow behavior of these reservoirs with changes ineffective stress during their development and production history. In particular, improved understanding is needed for predicting borehole stability and reservoir response during pore pressure drawdown. To address these problems, a cooperative project between Oryx Energy Company and Sandia National Laboratories was undertaken to study the effects of rock properties, in situ stress, and changes in effective stress on the deformation and permeability of stress sensitive, naturally-fractured reservoirs. A low value for the proelastic parameter was found, implying that the reservoir should have a low sensitivity to declining pore pressure. A surprisingly diverse suite of fractures was identified from core. From the coring-induced fractures, it was plausible to conclude that the maximum principal stress was in the horizontal plane. Measurements on permeability of naturally fractured rock in a newly-developed experimental arrangement showed that slip on fractures is much more effective inchangingpcrtncability than is normal stress. The intermediate principal stress was found to have a strong effect, on the strength and ductility of the chalk, implying the need for a more sophisticated calculation of borehole stability.
Download or read book Drilling Geomechanics in Naturally Fractured Reservoirs Near Salt Structures written by Juan Pedro Morales Salazar and published by Springer Nature. This book was released on with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geomechanics Fluid Dynamics and Well Testing Applied to Naturally Fractured Carbonate Reservoirs written by Nelson Enrique Barros Galvis and published by Springer. This book was released on 2018-05-02 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents an important step towards a deeper understanding of naturally fractured carbonate reservoirs (NFCRs). It demonstrates the various kinds of discontinuities using geological evidence, mathematical kinematics model and computed tomography and uses this as a basis for proposing a new classification for NFCRs. Additionally, this study takes advantage of rock mechanics theory to illustrate how natural fractures can collapse due to fluid flow and pressure changes in the fractured media. The explanations and mathematical modeling developed in this dissertation can be used as diagnostic tools to predict fluid velocity, fluid flow, tectonic fracture collapse, pressure behavior during reservoir depleting, considering stress-sensitive and non-stress-sensitive, with nonlinear terms in the diffusivity equation applied to NFCRs. Furthermore, the book presents the description of real reservoirs with their field data as the principal goal in the mathematical description of the realistic phenomenology of NFCRs.
Download or read book Simulation and Production Evaluation of Multiple stage Hydraulic Fracturing in Horizontal Wellbores written by Mahdi Haddad and published by . This book was released on 2017 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shale formations have globally emerged as the sustainable hydrocarbon resources in the advent of the technologies for the economic production from these formations: horizontal drilling combined with multiple-stage hydraulic fracturing. The viable production from these resources requires a maximized stimulated reservoir volume encompassing a complex induced fracture network, which is highly dependent on the stimulation design. The optimization of the ultimate recovery requires integrated fracturing models with reservoir models in virtue of the limitations on the field data acquisition and their reliability, the high-cost of re-stimulation plans, and low-fidelity current reservoir simulation workflows. We proposed 2D and 3D hydraulic-fracturing models on the basis of the cohesive zone model (CZM) and extended finite element method (XFEM) with a combination of the following capabilities: (1) inclusion of fracture intersections via pore-pressure coupling; (2) fully-coupled poroelasticity in matrix, continuum-based leakoff, and slit flow in fracture(s) with the cohesive behavior for fracture growth. These models were validated in comparison with KGD solution, and were employed for the hydraulic-fracturing design and understanding microseismic event distributions. Moreover, the output of these models in a specific 2D case was integrated with a reservoir simulation workflow for the prediction of long-term production from the induced fracture network. Our 2D and 3D fracture-intersection cases demonstrate the significant role of the following parameters in the growth pattern of fractures upon intersection: (1) the length of the initially open segment of the natural fracture at the intersection; (2) the horizontal stress contrast; (3) the distance between the injection point and the intersection. Notably, hydraulic fracturing in higher depths with higher horizontal stress contrasts and closer injection points to the intersection causes more extensive natural-fracture opening and shear slippage. Also, we demonstrated the application of the proposed 3D fracture intersection model for further understanding of the anomalies observed in the Vaca Muerta Shale. This study revealed that the microseismic events at shallower depths, later times, and deviated from the expected planar distribution are mainly associated with shear slippage along weak interfaces due to the induced stresses by hydraulic fracturing. Thereby, our explicit modeling of fluid infiltration into the natural fracture(s) at the intersection leads to better understanding of the nature of microseismic events. Our multiple-stage, multiple-wellbore, hydraulic-fracturing model for naturally fractured reservoirs includes the operational and field components during the shale stimulations such as perforation tunnel length distribution, horizontal wellbores, stochastically-retrieved fully-cemented natural-fracture network, plugs for the stage stimulation (via connector elements), and external stimulation scenarios (controlled by programming the connector elements in an external user subroutine). The application of this model on synthetic cases shows the following: (1) sequential fracturing with limited number of clusters per stage leads to more control on the cluster stimulation in the presence of the non-uniform perforation tunnel length distribution and wellbore model; (2) proportional cluster efficiency with the perforation tunnel length (promoting the consistent perforation technology); (3) over-estimation of the cluster stimulation in the absence of the wellbore model and/or the natural-fracture network; and (4) more-viscous fracturing fluids conclude less complex induced fracture network (in agreement with the common field observations). The initial natural-fracture network in this model was retrieved from the proposed object-based method. Also, the transfer of the induced fracture network into an embedded discrete fracture model is featured by the higher fidelity in the estimation of long-term gas production from naturally fractured reservoirs. For the investigation of the effect of in-situ stresses on the reservoir engineering problems, we implemented the coupling of a geomechanics module with the UTCOMP reservoir simulator. We first validated this implementation via comparing the results with GPAS and CMG results at various cases. Our improvements in the geomechanics module (lowering the frequency of calling the geomechanics module and the order of the finite-element shape functions) significantly reduced the computational expenses while maintaining the solution accuracy. Overall, water flooding shows more sensitivity to the number of the reservoir-simulation time steps per geomechanics call than gas flooding cases (e.g., CO2 injection). Our reservoir simulation model for re-fracturing included various injection and production steps to show the effect of the re-fracturing fluid injection in a depleted formation on the ultimate recovery. This study showed the significant effect of the re-fracturing water injection in production via changing a single-phase to two-phase gas flow regime and deeper water invasion into the matrix due to the pressure depletion (after primary production)
Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of the US shale gas revolution in 2005, the development of unconventional oil and gas resources has gathered tremendous pace around the world. This book provides a comprehensive overview of the key geologic, geophysical, and engineering principles that govern the development of unconventional reservoirs. The book begins with a detailed characterization of unconventional reservoir rocks: their composition and microstructure, mechanical properties, and the processes controlling fault slip and fluid flow. A discussion of geomechanical principles follows, including the state of stress, pore pressure, and the importance of fractures and faults. After reviewing the fundamentals of horizontal drilling, multi-stage hydraulic fracturing, and stimulation of slip on pre-existing faults, the key factors impacting hydrocarbon production are explored. The final chapters cover environmental impacts and how to mitigate hazards associated with induced seismicity. This text provides an essential overview for students, researchers, and industry professionals interested in unconventional reservoirs.
Download or read book Applied Concepts in Fractured Reservoirs written by John C. Lorenz and published by John Wiley & Sons. This book was released on 2020-01-13 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: A much-needed, precise and practical treatment of a key topic in the energy industry and beyond, Applied Concepts in Fractured Reservoirs is an invaluable reference for those in both industry and academia Authored by renowned experts in the field, this book covers the understanding, evaluation, and effects of fractures in reservoirs. It offers a comprehensive yet practical discussion and description of natural fractures, their origins, characteristics, and effects on hydrocarbon reservoirs. It starts by introducing the reader to basic definitions and classifications of fractures and fractured reservoirs. It then provides an outline for fractured-reservoir characterization and analysis, and goes on to introduce the way fractures impact operational activities. Well organized and clearly illustrated throughout, Applied Concepts in Fractured Reservoirs starts with a section on understanding natural fractures. It looks at the different types, their dimensions, and the mechanics of fracturing rock in extension and shear. The next section provides information on measuring and analyzing fractures in reservoirs. It covers: logging core for fractures; taking, measuring, and analyzing fracture data; new core vs. archived core; CT scans; comparing fracture data from outcrops, core, and logs; and more. The last part examines the effects of natural fractures on reservoirs, including: the permeability behavior of individual fractures and fracture systems; fracture volumetrics; effects of fractures on drilling and coring; and the interaction between natural and hydraulic fractures. Teaches readers to understand and evaluate fractures Compiles and synthesizes various concepts and descriptions scattered in literature and synthesizes them with unpublished oil-field observations and data, along with the authors’ own experience Bridges some of the gaps between reservoir engineers and geologists Provides an invaluable reference for geologists and engineers who need to understand naturally fractured reservoirs in order to efficiently extract hydrocarbons Illustrated in full color throughout Companion volume to the Atlas of Natural and Induced Fractures in Core
Download or read book Geomechanics and Hydraulic Fracturing for Shale Reservoirs written by Yu Wang and published by Scientific Research Publishing, Inc. USA. This book was released on 2020-07-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as a reference book for advanced graduate students and research engineers in shale gas development or rock mechanical engineering. Globally, there is widespread interest in exploiting shale gas resources to meet rising energy demands, maintain energy security and stability in supply and reduce dependence on higher carbon sources of energy, namely coal and oil. However, extracting shale gas is a resource intensive process and is dependent on the geological and geomechanical characteristics of the source rocks, making the development of certain formations uneconomic using current technologies. Therefore, evaluation of the physical and mechanical properties of shale, together with technological advancements, is critical in verifying the economic viability of such formation. Accurate geomechanical information about the rock and its variation through the shale is important since stresses along the wellbore can control fracture initiation and frac development. In addition, hydraulic fracturing has been widely employed to enhance the production of oil and gas from underground reservoirs. Hydraulic fracturing is a complex operation in which the fluid is pumped at a high pressure into a selected section of the wellbore. The interaction between the hydraulic fractures and natural fractures is the key to fracturing effectiveness prediction and high gas development. The development and growth of a hydraulic fracture through the natural fracture systems of shale is probably more complex than can be described here, but may be somewhat predictable if the fracture system and the development of stresses can be explained. As a result, comprehensive shale geomechanical experiments, physical modeling experiment and numerical investigations should be conducted to reveal the fracturing mechanical behaviors of shale.
Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.
Download or read book Geologic Analysis of Naturally Fractured Reservoirs written by Ronald Nelson and published by Elsevier. This book was released on 2001-08-24 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geologists, engineers, and petrophysicists concerned with hydrocarbon production from naturally fractured reservoirs will find this book a valuable tool for obtaining pertinent rock data to evaluate reserves and optimize well location and performance. Nelson emphasizes geological, petrophysical, and rock mechanics to complement other studies of the subject that use well logging and classical engineering approaches. This well organized, updated edition contains a wealth of field and laboratory data, case histories, and practical advice. A great how-to-guide for anyone working with fractured or highly anisotropic reservoirs Provides real-life illustrations through case histories and field and laboratory data
Download or read book Multiphase Fluid Flow in Porous and Fractured Reservoirs written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2015-09-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Fluid Flow in Porous and Fractured Reservoirs discusses the process of modeling fluid flow in petroleum and natural gas reservoirs, a practice that has become increasingly complex thanks to multiple fractures in horizontal drilling and the discovery of more unconventional reservoirs and resources. The book updates the reservoir engineer of today with the latest developments in reservoir simulation by combining a powerhouse of theory, analytical, and numerical methods to create stronger verification and validation modeling methods, ultimately improving recovery in stagnant and complex reservoirs. Going beyond the standard topics in past literature, coverage includes well treatment, Non-Newtonian fluids and rheological models, multiphase fluid coupled with geomechanics in reservoirs, and modeling applications for unconventional petroleum resources. The book equips today’s reservoir engineer and modeler with the most relevant tools and knowledge to establish and solidify stronger oil and gas recovery. Delivers updates on recent developments in reservoir simulation such as modeling approaches for multiphase flow simulation of fractured media and unconventional reservoirs Explains analytical solutions and approaches as well as applications to modeling verification for today’s reservoir problems, such as evaluating saturation and pressure profiles and recovery factors or displacement efficiency Utilize practical codes and programs featured from online companion website
Download or read book Energy Research Abstracts written by and published by . This book was released on 1984 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book Geological Aspects of Horizontal Drilling written by Richard D. Fritz and published by . This book was released on 1991 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coupled Geomechanics and Multiphase Flow Modeling in Naturally and Hydraulically Fractured Reservoirs written by Yanli Pei and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid injection and production in highly fractured unconventional reservoirs could induce complex stress reorientation and redistribution. The strong stress sensitivity of fractured formations may also lead to non-negligible fracture opening or closure under the reservoir loading or unloading process. Hence, a coupled flow and geomechanics model is in high demand to assist with stress prediction and production forecast in unconventional reservoirs. In this dissertation, an enhanced geomechanics model is developed for fractured reservoirs and integrated with the in-house compositional reservoir simulator – UTCOMP for coupled flow and geomechanics modeling. The multiphase flow model is solved using the finite volume method (FVM) with an embedded discrete fracture model (EDFM) to represent flow through complex fractures. Based on static fracture assumption, the finite element method (FEM) is applied to solve the geomechanics model by incorporating fracture effects on rock deformation through pore pressure changes. An iterative coupling procedure is implemented between fluid flow and geomechanics, and the 3D coupled model is applied to predict spatiotemporal stress evolution in single-layer and multilayer unconventional reservoirs. To consider dynamic fracture properties, the geomechanics model is further enhanced by the extended finite element method (XFEM) with a modified linear elastic proppant model. The fracture surface is under the coeffects of pore pressure and proppant particles, and various enrichment functions are introduced to reproduce the discontinuous fields over fracture paths. The enhanced geomechanics model is validated against classical Sneddon and Elliot’s problem and presents a first-order spatial convergence rate. Numerical studies indicate that modeling fracture closure is necessary for poorly propped, highly stressed, or fast depleted reservoirs, and fracture opening can be significant under high permeability and low stiffness conditions. The coupled flow and geomechanics model is finally combined with a displacement discontinuity method (DDM) hydraulic fracture model to establish an integrated reservoir-geomechanics-fracture model for the end-to-end optimization of secondary stimulations. It is applied to Permian Basin and Sichuan Basin tight formations to optimize parent-child well spacing at different infill times. The integrated model provides hands-on guidelines for refracturing and infill drilling in multilayer unconventional reservoirs and can be easily adapted to other basins under their unique data
Download or read book Proceedings of the International Field Exploration and Development Conference 2023 written by Jia’en Lin and published by Springer Nature. This book was released on with total page 1421 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Comprehensive Study on Three dimensional Stress Evolution in Unconventional Reservoirs and Implications for Infill Drilling and Completion written by Jia Joanna He and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing energy demand around the globe comes an increase in infill well drilling activities. Ideally, infill wells are placed in the undrained region of the unconventional reservoir, producing from where the horizontal parent wells were unable to produce. Geomechanics play a critical role in infill well operations, because production alters the initial in-situ stresses abiding to the theory of poroelasticity, and the change will inevitably impact child fracture growth and hydraulic fracturing efficiency. Despite the numerous existing literature on the topic of poroelastic stress change and infill well strategies, numerical studies on the effects of well and fracture designs on stress change are limited, and it is even more rare to seek literature regarding the stochastic of hydraulic fracture and natural fracture distributions when modeling stress evolution. Therefore, the purpose of this research is to provide a comprehensive sensitivity study on the most prominent well and fracture designs, and the effects of stochastic fracture property distributions on stress reorientation in unconventional reservoirs. A three-dimensional (3D) reservoir model is built with fluid flow and geomechanics iteratively coupled. The first part of this study characterized hydraulic fractures using the local grid refinement (LGR) approach, and the infill region is in between a pair of horizontal wells. Effects of well spacing, minimum bottom-hole pressure (BHP), and cluster spacing on stress reorientation are investigated. Stress evolution in space and time are observed, as well as stress reversal at the infill region. The stress reversal onset time is most susceptible to changes in the BHP, followed by cluster spacing and well spacing. The second and third parts of this study involve a multi-layer reservoir, and the hydraulic and natural fractures are characterized by the Embedded Discrete Fracture Model (EDFM). The parent well is in the middle layer of the reservoir, and there are two prospective locations for the infill well, where one is in the top layer, and another in the producing layer. Hydraulic fracture properties and natural fracture properties are stochastically distributed in the effort to identify and quantify their impacts on in-situ stress evolution. The simulation results show that stress reversal only occurred in the producing layer, while stress reorientation reached a peak value in the top layer before commencing to return to its initial state. The stochastic distributions of hydraulic fracture half-length and height demonstrate highest level of influence on stress reorientation in the producing and top layers, respectively. Natural fractures in general accelerates stress rotation; natural fracture length presents to be the most influential property on stress change. Specific infill well fracturing times are provided on a case-by-case scenario. Overall, this work is based on the theory of poroelasticity in the hope to extend on the current knowledge of flow-induced stress alteration. It provides a detailed investigation on several factors that will affect in-situ stresses. The highlights of the simulation outputs should shed light on infill well strategies
Download or read book Stress Regimes in the Lithosphere written by Terry Engelder and published by Princeton University Press. This book was released on 2014-07-14 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to acquaint the geoscientist with issues associated with the debate over orientation and magnitude of stress in the lithosphere. Terry Engelder provides a broad understanding of the topic, while touching some of the specific details involved in the interpretation of stress data generated by the most commonly used measurement techniques. An understanding of stress in the lithosphere starts with an introduction to nomenclature based on three reference states of stress. Since rock strength governs differential stress magnitudes, stress regimes are identified according to the specific failure mechanism (crack propagation, shear rupture, ductile flow, or frictional slip) that controls the magnitude of stress at a particular time and place in the lithosphere. After introducing the various stress regimes, the author shows how their extent in the upper crust is demarcated by direct measurements of four types: hydraulic fracture, borehole-logging, strain-relaxation, and rigid-inclusion measurements. The relationship between lithospheric stress and the properties of rocks is then presented in terms of microcrack-related phenomena and residual stress. Lithospheric stress is also inferred from the analysis of earthquakes. Finally, lithospheric stress is placed in the context of large-scale stress fields and plate tectonics. Originally published in 1993. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Simulation Studies to Evaluate the Effect of Fracture Closure on the Performance of Fractured Reservoirs Final Report written by and published by . This book was released on 1994 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: A three-year research program to evaluate the effect of fracture closure on the recovery of oil and gas from naturally fractured reservoirs has been completed. The overall objectives of the study were to: (1) evaluate the reservoir conditions for which fracture closure is significant, and (2) evaluate innovative fluid injection techniques capable of maintaining pressure within the reservoir. The evaluations of reservoir performance were made by a modern dual porosity simulator, TETRAD. This simulator treats both porosity and permeability as functions of pore pressure. The Austin Chalk in the Pearsall Field in of South Texas was selected as the prototype fractured reservoir for this work. During the first year, simulations of vertical and horizontal well performance were made assuming that fracture permeability was insensitive to pressure change. Sensitivity runs indicated that the simulator was predicting the effects of critical reservoir parameters in a logical and consistent manner. The results confirmed that horizontal wells could increase both rate of oil recovery and total oil recovery from naturally fractured reservoirs. In the second year, the performance of the same vertical and horizontal wells was reevaluated with fracture permeability treated as a function of reservoir pressure. To investigate sensitivity to in situ stress, differing loading conditions were assumed. Simulated natural depletions confirm that pressure sensitive fractures degrade well performance. The severity of degradation worsens when the initial reservoir pressure approaches the average stress condition of the reservoir, such as occurs in over pressured reservoirs. Simulations with water injection indicate that degradation of permeability can be counteracted when reservoir pressure is maintained and oil recovery can be increased when reservoir properties are favorable.