Download or read book Genetically Engineered Crops written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-28 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically engineered (GE) crops were first introduced commercially in the 1990s. After two decades of production, some groups and individuals remain critical of the technology based on their concerns about possible adverse effects on human health, the environment, and ethical considerations. At the same time, others are concerned that the technology is not reaching its potential to improve human health and the environment because of stringent regulations and reduced public funding to develop products offering more benefits to society. While the debate about these and other questions related to the genetic engineering techniques of the first 20 years goes on, emerging genetic-engineering technologies are adding new complexities to the conversation. Genetically Engineered Crops builds on previous related Academies reports published between 1987 and 2010 by undertaking a retrospective examination of the purported positive and adverse effects of GE crops and to anticipate what emerging genetic-engineering technologies hold for the future. This report indicates where there are uncertainties about the economic, agronomic, health, safety, or other impacts of GE crops and food, and makes recommendations to fill gaps in safety assessments, increase regulatory clarity, and improve innovations in and access to GE technology.
Download or read book Safety of Genetically Engineered Foods written by National Research Council and published by National Academies Press. This book was released on 2004-07-08 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assists policymakers in evaluating the appropriate scientific methods for detecting unintended changes in food and assessing the potential for adverse health effects from genetically modified products. In this book, the committee recommended that greater scrutiny should be given to foods containing new compounds or unusual amounts of naturally occurring substances, regardless of the method used to create them. The book offers a framework to guide federal agencies in selecting the route of safety assessment. It identifies and recommends several pre- and post-market approaches to guide the assessment of unintended compositional changes that could result from genetically modified foods and research avenues to fill the knowledge gaps.
Download or read book Genetic Engineering of Crop Plants written by G. W. Lycett and published by Elsevier. This book was released on 2013-10-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetic Engineering of Crop Plants is a proceeding of The 49th Nottingham Easter School in Agricultural Science, which was held at Sutton Bonington on April 17-21, 1989. This symposium discussed progress in the generation of crop species resistant to herbicides, viruses, and insects. The book discusses topics such as the genetic manipulation in plants; genetic engineering of crops for insect and herbicide resistance; the expression of heat shock gene in transgenic plants; and tuber-specific gene expression. The book also covers topics such as regulation of gene expression in transgenic tomato plants; the molecular biology of pea seed development; and the regulatory elements of maize storage protein genes. The text is recommended for experts in the field of botany, agriculture, and genetics who would like to know more about the improvement of crop plants through genetics.
Download or read book Genetic Engineering of Plants written by National Research Council and published by National Academies Press. This book was released on 1984-02-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book...is, in fact, a short text on the many practical problems...associated with translating the explosion in basic biotechnological research into the next Green Revolution," explains Economic Botany. The book is "a concise and accurate narrative, that also manages to be interesting and personal...a splendid little book." Biotechnology states, "Because of the clarity with which it is written, this thin volume makes a major contribution to improving public understanding of genetic engineering's potential for enlarging the world's food supply...and can be profitably read by practically anyone interested in application of molecular biology to improvement of productivity in agriculture."
Download or read book Genetic Modification of Plants written by Frank Kempken and published by Springer Science & Business Media. This book was released on 2009-12-15 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conceived with the aim of sorting fact from fiction over genetically modified (GM) crops, this book brings together the knowledge of 30 specialists in the field of transgenic plants. It covers the generation and detection of these plants as well as the genetic traits conferred on transgenic plants. In addition, the book looks at a wide variety of crops, ornamental plants and tree species that are subject to genetic modifications, assessing the risks involved in genetic modification as well as the potential economic benefits of the technology in specific cases. The book’s structure, with fully cross-referenced chapters, gives readers a quick access to specific topics, whether that is comprehensive data on particular species of ornamentals, or coverage of the socioeconomic implications of GM technology. With an increasing demand for bioenergy, and the necessary higher yields relying on wider genetic variation, this book supplies all the technical details required to move forward to a new era in agriculture.
Download or read book Introduction To Genetic Engineering Of Crop Plants Aims And Achievements written by A. Rashid and published by I. K. International Pvt Ltd. This book was released on 2010-09-30 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transgene technology since its inception, about two decades ago, has progressed rapidly providing platform for discovery, product design and novel plants which are improved source of food, feed, chemicals and drugs. This knowledge is changing rapidly by which plants develop their architecture to survive, abiotic and biotic stress, and become resistant to herbicides, pests and pathogens. Also the scene is set for a change from traditional farming to molecular farming. Moreover, gene silencing from a bane has turned out to be a boon, opening new vistas in genetic engineering of crop plants. In this book one can find an up-to-date account of aims and achievements of genetic engineering of crop plants. This book will useful for the undergraduate students of Botany, Biotechnology and Agriculture.
Download or read book Field Testing Genetically Modified Organisms written by National Research Council and published by National Academies Press. This book was released on 1989-02-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Potential benefits from the use of genetically modified organismsâ€"such as bacteria that biodegrade environmental pollutantsâ€"are enormous. To minimize the risks of releasing such organisms into the environment, regulators are working to develop rational safeguards. This volume provides a comprehensive examination of the issues surrounding testing these organisms in the laboratory or the field and a practical framework for making decisions about organism release. Beginning with a discussion of classical versus molecular techniques for genetic alteration, the volume is divided into major sections for plants and microorganisms and covers the characteristics of altered organisms, past experience with releases, and such specific issues as whether plant introductions could promote weediness. The executive summary presents major conclusions and outlines the recommended decision-making framework.
Download or read book Genetically Modified Pest Protected Plants written by National Research Council and published by National Academies Press. This book was released on 2000-08-23 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the risks and benefits of crops that are genetically modified for pest resistance, the urgency of establishing an appropriate regulatory framework for these products, and the importance of public understanding of the issues. The committee critically reviews federal policies toward transgenic products, the 1986 coordinated framework among the key federal agencies in the field, and rules proposed by the Environmental Protection Agency for regulation of plant pesticides. This book provides detailed analyses of: Mechanisms and results of genetic engineering compared to conventional breeding for pest resistance. Review of scientific issues associated with transgenic pest-protected plants, such as allergenicity, impact on nontarget plants, evolution of the pest species, and other concerns. Overview of regulatory framework and its use of scientific information with suggestions for improvements.
Download or read book Genetic Engineering of Horticultural Crops written by Gyana Ranjan Rout and published by Academic Press. This book was released on 2018-01-08 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetic Engineering of Horticultural Crops provides key insights into commercialized crops, their improved productivity, disease and pest resistance, and enhanced nutritional or medicinal benefits. It includes insights into key technologies, such as marker traits identification and genetic traits transfer for increased productivity, examining the latest transgenic advances in a variety of crops and providing foundational information that can be applied to new areas of study. As modern biotechnology has helped to increase crop productivity by introducing novel gene(s) with high quality disease resistance and increased drought tolerance, this is an ideal resource for researchers and industry professionals. Provides examples of current technologies and methodologies, addressing abiotic and biotic stresses, pest resistance and yield improvement Presents protocols on plant genetic engineering in a variety of wide-use crops Includes biosafety rule regulation of genetically modified crops in the USA and third world countries
Download or read book Plant Genetic Engineering written by John H. Dodds and published by Cambridge University Press. This book was released on 1985-10-31 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 1985 book describes techniques in plant genetic research and the practical application of genetic engineering for molecular biologists.
Download or read book Plants Genes and Crop Biotechnology written by Maarten J. Chrispeels and published by Jones & Bartlett Learning. This book was released on 2003 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book integrates many fields to help students understand the complexity of the basic science that underlies crop and food production.
Download or read book Transgenic Crop Plants written by Chittaranjan Kole and published by Springer Science & Business Media. This book was released on 2010-01-13 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of transgenic crop plants, their utilization for improved agriculture, health, ecology and environment and their socio-political impacts are currently important fields in education, research and industries and also of interest to policy makers, social activists and regulatory and funding agencies. This work prepared with a class-room approach on this multidisciplinary subject will fill an existing gap and meet the requirements of such a broad section of readers. Volume 1 with ten chapters contributed by 31 eminent scientists from nine countries deliberates on the basic concepts, strategies and tools for development of transgenic crop plants, including topics such as: explants used for the generation of transgenic plants, gene transfer methods, organelle transformation, selection and screening strategies, expression and stability of transgenes, silencing undesirable genes, transgene integration, biosynthesis and biotransformation and metabolic engineering of pathways and gene discovery.
Download or read book Genetic Engineering of Plants for Crop Improvement written by Rup Lal and published by CRC Press. This book was released on 2020-01-31 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetic Engineering of Plants for Crop Improvement discusses current genetic engineering methods for plants and addresses the commercial opportunities for transgenic plants. Topics covered include Agrobacterium-mediated transformations, the use of electroporation, PEG-mediated transformation, microinjection, the microprojectile bombardment method, and the electrical discharge particle acceleration method. A concise account of the resistance of transgenic plants to insect attack, viral infection, and herbicides has also been provided. Possibilities for genetic manipulation for proteins that have superior nutritional properties are discussed, and a brief account of tests confirming the safety and commercial validity of transgenic plants is included. A valuable source of information for researchers and students in plant biotechnology, plant gene manipulation, molecular biology, and all areas of the life sciences.
Download or read book Plant Biotechnology written by Adrian Slater and published by OUP Oxford. This book was released on 2008-03-27 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Biotechnology presents a balanced, objective exploration of the technology behind genetic manipulation, and its application to the growth and cultivation of plants. The book describes the techniques underpinning genetic manipulation and makes extensive use of case studies to illustrate how this influential tool is used in practice.
Download or read book Molecular Approaches to Crop Improvement written by Elizabeth S. Dennis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plant genes were first isolated only some twelve years ago and transfer of foreign DNA into tobacco cells first demonstrated some eight years ago, the application and extension of biotechnology to agricultural problems has already led to the field-testing of genetically modified crop plants. The promise of tailor-made plants containing resistance to pests or diseases as well as many other desirable characteristics has led to the almost compulsory incorporation of molecular biology into the research programs of chemical and seed companies as well as Governmental agricultural agencies. With the routine transformation of rice and the early evidence of transformation of maize the possibility of the world's major cereal crops being modified for improved nutritional value or resistance characteristics is now likely in the next few years. The increasing number of cloned plant genes and the increasing sophistication of our knowledge of the major developmental and biochemi cal pathways in plants should eventually allow us to engineer crop plants with higher yields and with less detrimental impact on the environment than now occurs in our current high input agricultural systems. This book draws together many of the expanding areas of plant molecular biology and genetic engineering that will make a substantial contribution to the development of the more productive and efficient crop plants that the world's farmers will be planting in the next decade.
Download or read book Applications of Genetic Engineering to Crop Improvement written by G.B. Collins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions of plant genetics to the production of higher yielding crops of superior quality are well documented. These successes have been realized through the application of plant breeding techniques to a diverse array of genetically controlled traits. Such highly effective breeding procedures will continue to be the primary method employed for the development of new crop cultivars; however, new techniques in cell and molecular biology will provide additional approaches for genetic modification. There has been considerable speculation recently concerning the potential impact of new techniques in cell and molecular biology on plant improvement. These genetic engineering techniques should offer unique opportunities to alter the genetic makeup of crops if applied to existing breeding procedures. Many questions must be answered in order to identify specific applications of these new technologies. This search for applications will require input from plant scientists working on various aspects of crop improvement. This volume is intended to assess the interrelationships between conventional plant breeding and genetic engineering.
Download or read book Alien Gene Transfer in Crop Plants Volume 2 written by Aditya Pratap and published by Springer Science & Business Media. This book was released on 2014-02-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetic engineering and biotechnology along with conventional breeding have played an important role in developing superior cultivars by transferring economically important traits from distant, wild and even unrelated species to the cultivated varieties which otherwise could not have been possible with conventional breeding. There is a vast amount of literature pertaining to the genetic improvement of crops over last few decades. However, the wonderful results achieved by crop scientists in food legumes’ research and development over the years are scattered in different journals of the World. The two volumes in the series ‘Alien Gene Transfer in Crop Plants’ address this issue and offer a comprehensive reference on the developments made in major food crops of the world. These volumes aim at bringing the contributions from globally renowned scientists at one platform in a reader-friendly manner. The second volume entitled, “Alien Gene Transfer in Crop Plants: Achievements and Impact” will deal more with the practical aspects. This volume will cover achievements of alien gene transfer in major food crops of the world and their impact on development of newer genetic variability and additional avenues for selection; development of superior cultivars for increased yield, resistance to biotic and abiotic stresses, improved nutritional and industrial quality; innovation of new techniques and positive as well as negative environmental implications. This volume has been divided into four groups with an aim to cover all major cereals, pulses, oilseeds and other crops (vegetable and horticultural crops) which are of economic importance.
