Download or read book Generic Techniques in Systems Reliability Assessment written by E.J. Henley and published by Springer. This book was released on 1976-08-31 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NA TO Advanced Study Institute is, to quote the Notes for Applicants "primarily a high level teaching activity at which a carefully defined subject is presented in a systematic and coherently structured programme. The subject is treated in considerable depth by eminent lecturers . . . . ••. . . " The NATO ASI on Generic Techniques in Systems Reliability Assessment was held at the University of Liverpool and the Proceedings are presented in the present volume. Regrettably many of the papers are in shortened version. This was an inter disciplinary assembly designed to focus on the synthesis of generic reliability concepts and technology and to discuss relevant teaching and research in universities and colleges. One important objective was, of course, to give opportunity for interchange of information on advanced techniques in reliability in various fields. The Institute was held in Dale Hall, one of the halls of residence of the University of Liverpool, England, from 17th to 28th July, 1973. Sixty-four engineers from twelve countries attended, namely, 27 from U. K. , 14 from U. S. A. 8 from Italy, 4 from West Germany, 2 from France, 2 from the Netherlands, 2 from Sweden each from Belgium, Canada, Denmark, India and Norway. and one Seven of these had their wives and some brought their children also. The technical affiliations which were represented were 23 universities, 22 national laboratories, 11 industry, 5 military, 3 consultants.

Download or read book Risk Based Reliability Analysis and Generic Principles for Risk Reduction written by Michael T. Todinov and published by Elsevier. This book was released on 2006-11-03 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written with the intention to fill two big gaps in the reliability and risk literature: the risk-based reliability analysis as a powerful alternative to the traditional reliability analysis and the generic principles for reducing technical risk. An important theme in the book is the generic principles and techniques for reducing technical risk. These have been classified into three major categories: preventive (reducing the likelihood of failure), protective (reducing the consequences from failure) and dual (reducing both, the likelihood and the consequences from failure). Many of these principles (for example: avoiding clustering of events, deliberately introducing weak links, reducing sensitivity, introducing changes with opposite sign, etc.) are discussed in the reliability literature for the first time. Significant space has been allocated to component reliability. In the last chapter of the book, several applications are discussed of a powerful equation which constitutes the core of a new theory of locally initiated component failure by flaws whose number is a random variable. Offers a shift in the existing paradigm for conducting reliability analyses Covers risk-based reliability analysis and generic principles for reducing risk Provides a new measure of risk based on the distribution of the potential losses from failure as well as the basic principles for risk-based design Incorporates fast algorithms for system reliability analysis and discrete-event simulators Includes the probability of failure of a structure with complex shape expressed with a simple equation

Download or read book Systems Reliability and Risk Analysis written by E.G. Frankel and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ernst G. Frankel This book has its origin in lecture notes developed over several years for use in a course in Systems Reliability for engineers concerned with the design of physical systems such as civil structures, power plants, and transport vehicles of all types. Increasing public concern with the reliability o~ systems for reasons of human safety, environmental protection, and acceptable ir. vestment risk limitations has resulted in an increasing interest by engineers in the formal applica~i0n of reliability theory to e~gineering desian. At the same time there is a demand for more effective approaches to the des~gn of procedures for the operation and use of man-made syste~s and more meaningful assessment of the risks intr)duction and use of such a system poses both when operating as designed and when operating at below design performance. The purpose of the book is to provide a sound, yet practical, introduction to reliability analysis and risk assessment which can be used by professionals in engineering, planning, management, and economics to improve the design, operation, and risk assessment of systems of interest. The text should be useful for students in many disciplines and is designed for fourth~year undergraduates or first-year graduate students. I would like to acknowledge the help of many of my graduate students who contributed to the development of this book by offering comments and criticism. Similarly I would like to thank Mrs.

Download or read book Process Systems Risk Management written by Ian T. Cameron and published by Elsevier. This book was released on 2005-06-14 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Systems Risk Management provides complete coverage of risk management concepts and applications for safe design and operation of industrial and other process facilities. The whole life cycle of the process or product is taken into account, from its conception to decommissioning. The breadth of human factors in risk management is also treated, ranging from personnel and public safety to environmental impact and business interruption. This unique approach to process risk management is firmly grounded in systems engineering. Numerous examples are used to illustrate important concepts –drawn from almost 40 years authors’ experience in risk analysis, assessment and management, with applications in both on- and off-shore operations. This book is essential reading on the relevant techniques to tackle risk management activities for small-, medium- and large-scale operations in the process industries. It is aimed at informing a wide audience of industrial risk management practitioners, including plant managers, engineers, health professionals, town planners, and administrators of regulatory agencies. A computational perspective on the risk management of chemical processes A multifaceted approach that includes the technical, social, human and management factors Includes numerous examples and illustrations from real life incidents

Download or read book Applied Life Data Analysis written by Wayne B. Nelson and published by John Wiley & Sons. This book was released on 2003-12-22 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: WILEY-INTERSCIENCE PAPERBACK SERIES The Wiley-Interscience Paperback Series consists of selected books that have been made more accessible to consumers in an effort to increase global appeal and general circulation. With these new unabridged softcover volumes, Wiley hopes to extend the lives of these works by making them available to future generations of statisticians, mathematicians, and scientists. "Many examples drawn from the author’s experience of engineering applications are used to illustrate the theoretical results, which are presented in a cookbook fashion...it provides an excellent practical guide to the analysis of product-life data." –T.M.M. Farley Special Programme of Research in Human Reproduction World Health Organization Geneva, Switzerland Review in Biometrics, September 1983 Now a classic, Applied Life Data Analysis has been widely used by thousands of engineers and industrial statisticians to obtain information from life data on consumer, industrial, and military products. Organized to serve practitioners, this book starts with basic models and simple informative probability plots of life data. Then it progresses through advanced analytical methods, including maximum likelihood fitting of advanced models to life data. All data analysis methods are illustrated with numerous clients' applications from the author's consulting experience.

Download or read book Information Based Manufacturing written by Michael J. Shaw and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their mutually influencing interactions, information systems and modern manufacturing systems are intertwined. They have been so integrated that information systems have become an embedded and critical component of any effective manufacturing system. The impact of the increasing focus on information permeates throughout the manufacturing life cycle, from product conceptualization, design, process planning, all the way to production, order fulfilment, and customer services. For these reasons, it is critical that we study information-based manufacturing in its entirety, crossing the traditional functional boundaries and building as much synergy between Information Systems (IS), Information Technology (IT), and manufacturing as possible. This is the motivation for this book and, to this end, the purpose of this book is threefold: to establish an up-to-date interdisciplinary research framework for information-based manufacturing that builds on the research foundation from IS and IT and manufacturing research; to develop a forward-looking research agenda for information-based manufacturing for identifying future directions for research and applications; and to foster a joint academic and industrial research agenda in information systems and manufacturing by identifying the greatest synergy possible between academic research and industrial practices.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Risk and Hazard Assessment written by Abraham Kandel and published by CRC Press. This book was released on 2018-01-18 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volumes deal with the newly emerging field ofRisk and Hazard Assessment and its application to science and engineering. These volumes deal with issues such as short-and long-term hazards, setting priorities in safety, fault analysis for process plants, hazard identification and safety assessment of human- robot systems, plant fault diagnoses expert systems, knowledge based diagnostic systems, fault tree analysis, modelling of computer security systems for risk and reliability analysis, risk analysis of fatigue failure, fault evaluation of complex system, probabilistic risk analysis, and expert systems for fault detection. This volume will provide the reader not only with valuable conceptual and technical information but also with a better view of the field, its problems, accomplishments, and future potentials

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974 with total page 1756 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electronic Reliability Design Handbook written by and published by . This book was released on 1988 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book VLSI in Medicine written by Norman G. Einspruch and published by Academic Press. This book was released on 2014-12-01 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Electronics Microstructure Science, Volume 17: VLSI in Medicine deals with the more important applications of VLSI in medical devices and instruments. This volume is comprised of 11 chapters. It begins with an article about medical electronics. The following three chapters cover diagnostic imaging, focusing on such medical devices as magnetic resonance imaging, neurometric analyzer, and ultrasound. Chapters 5, 6, and 7 present the impact of VLSI in cardiology. The electrocardiograph, implantable cardiac pacemaker, and the use of VLSI in Holter monitoring are detailed in these chapters. The neurostimulator is described in Chapter 8. Chapter 9 discusses both implantable and external drug infusion pumps and describes the use of VLSI in a particular external pump. The last two chapters cover topics that apply to the entire field of medical electronics. Engineers, scientists, medical practitioners and researchers will find the book very useful.

Download or read book Guidelines for Hazard Evaluation Procedures written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Hazard Evaluation Procedures, 3rd Edition keeps process engineers updated on the effective methodologies that process safety demands. Almost 200 pages of worked examples are included to facilitate understanding. References for further reading, along with charts and diagrams that reflect the latest views and information, make this a completely accessible work. The revised and updated edition includes information not included in previous editions giving a comprehensive overview of this topic area.

Download or read book Reliability Engineering Handbook written by Kececioglu Dimitri B and published by DEStech Publications, Inc. This book was released on 2002 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanding on the coverage provided in Volume 1, this volume covers the prediction of equipment and system reliability for the series, parallel, standby, and conditional function configuration cases and discusses the prediction of the reliability of complex components, equipment, and systems with multimode function and logic, among others.

Download or read book Landslide Risk Assessment written by E. Mark Lee and published by Thomas Telford. This book was released on 2004 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade there has been a gradual shift away from simply relying on engineering solutions to individual landslide problems, to the use of a variety of strategies to manage the problems over a broad area. Such alternative strategies include the use of building codes, land use planning controls, preventing water leakage, early warning systems and insurance schemes.This book addresses these developments and provides a multidisciplinary perspective on landslide management.

Download or read book Design and Evaluation of Physical Protection Systems written by Mary Lynn Garcia and published by Elsevier. This book was released on 2007-09-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Evaluation of Physical Security Systems, Second Edition, includes updated references to security expectations and changes since 9/11. The threat chapter includes references to new threat capabilities in Weapons of Mass Destruction, and a new figure on hate crime groups in the US. All the technology chapters have been reviewed and updated to include technology in use since 2001, when the first edition was published. Garcia has also added a new chapter that shows how the methodology described in the book is applied in transportation systems. College faculty who have adopted this text have suggested improvements and these have been incorporated as well. This second edition also includes some references to the author's recent book on Vulnerability Assessment, to link the two volumes at a high level. New chapter on transportation systems Extensively updated chapter on threat definition Major changes to response chapter

Download or read book Introduction to Reliability Engineering written by James E. Breneman and published by John Wiley & Sons. This book was released on 2022-04-26 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Reliability Engineering A complete revision of the classic text on reliability engineering, written by an expanded author team with increased industry perspective Introduction to Reliability Engineering provides a thorough and well-balanced overview of the fundamental aspects of reliability engineering and describes the role of probability and statistical analysis in predicting and evaluating reliability in a range of engineering applications. Covering both foundational theory and real-world practice, this classic textbook helps students of any engineering discipline understand key probability concepts, random variables and their use in reliability, Weibull analysis, system safety analysis, reliability and environmental stress testing, redundancy, failure interactions, and more. Extensively revised to meet the needs of today’s students, the Third Edition fully reflects current industrial practices and provides a wealth of new examples and problems that now require the use of statistical software for both simulation and analysis of data. A brand-new chapter examines Failure Modes and Effects Analysis (FMEA) and the Reliability Testing chapter has been greatly expanded, while new and expanded sections cover topics such as applied probability, probability plotting with software, the Monte Carlo simulation, and reliability and safety risk. Throughout the text, increased emphasis is placed on the Weibull distribution and its use in reliability engineering. Presenting students with an interdisciplinary perspective on reliability engineering, this textbook: Presents a clear and accessible introduction to reliability engineering that assumes no prior background knowledge of statistics and probability Teaches students how to solve problems involving reliability data analysis using software including Minitab and Excel Features new and updated examples, exercises, and problems sets drawn from a variety of engineering fields Includes several useful appendices, worked examples, answers to selected exercises, and a companion website Introduction to Reliability Engineering, Third Edition remains the perfect textbook for both advanced undergraduate and graduate students in all areas of engineering and manufacturing technology.

Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Butterworth-Heinemann. This book was released on 2012-11-05 with total page 3685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in the process industries is critical for those who work with chemicals and hazardous substances or processes. The field of loss prevention is, and continues to be, of supreme importance to countless companies, municipalities and governments around the world, and Lees’ is a detailed reference to defending against hazards. Recognized as the standard work for chemical and process engineering safety professionals, it provides the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing three volume reference instead. The process safety encyclopedia, trusted worldwide for over 30 years Now available in print and online, to aid searchability and portability Over 3,600 print pages cover the full scope of process safety and loss prevention, compiling theory, practice, standards, legislation, case studies and lessons learned in one resource as opposed to multiple sources