Download or read book Generation IV Benchmarking of TRISO Fuel Performance Models Under Accident Conditions written by and published by . This book was released on 2014 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents the benchmark plan for the calculation of particle fuel performance on safety testing experiments that are representative of operational accidental transients. The benchmark is dedicated to the modeling of fission product release under accident conditions by fuel performance codes from around the world, and the subsequent comparison to post-irradiation experiment (PIE) data from the modeled heating tests. The accident condition benchmark is divided into three parts: the modeling of a simplified benchmark problem to assess potential numerical calculation issues at low fission product release; the modeling of the AGR-1 and HFR-EU1bis safety testing experiments; and, the comparison of the AGR-1 and HFR-EU1bis modeling results with PIE data. The simplified benchmark case, thereafter named NCC (Numerical Calculation Case), is derived from ''Case 5'' of the International Atomic Energy Agency (IAEA) Coordinated Research Program (CRP) on coated particle fuel technology [IAEA 2012]. It is included so participants can evaluate their codes at low fission product release. ''Case 5'' of the IAEA CRP-6 showed large code-to-code discrepancies in the release of fission products, which were attributed to ''effects of the numerical calculation method rather than the physical model''[IAEA 2012]. The NCC is therefore intended to check if these numerical effects subsist. The first two steps imply the involvement of the benchmark participants with a modeling effort following the guidelines and recommendations provided by this document. The third step involves the collection of the modeling results by Idaho National Laboratory (INL) and the comparison of these results with the available PIE data. The objective of this document is to provide all necessary input data to model the benchmark cases, and to give some methodology guidelines and recommendations in order to make all results suitable for comparison with each other. The participants should read this document thoroughly to make sure all the data needed for their calculations is provided in the document. Missing data will be added to a revision of the document if necessary.

Download or read book Comprehensive Nuclear Materials written by Todd R Allen and published by Elsevier. This book was released on 2011-05-12 with total page 3552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nuclear Materials, Five Volume Set discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials. The work addresses the full panorama of contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environment Fully integrated with F-elements.net, a proprietary database containing useful cross-referenced property data on the lanthanides and actinides Details contemporary developments in numerical simulation, modelling, experimentation, and computational analysis, for effective implementation in labs and plants

Download or read book Advances in High Temperature Gas Cooled Reactor Fuel Technology written by International Atomic Energy Agency and published by . This book was released on 2012-06 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication reports on the results of a coordinated research project on advances in high temperature gas cooled reactor (HTGR) fuel technology and describes the findings of research activities on coated particle developments. These comprise two specific benchmark exercises with the application of HTGR fuel performance and fission product release codes, which helped compare the quality and validity of the computer models against experimental data. The project participants also examined techniques for fuel characterization and advanced quality assessment/quality control. The key exercise included a round-robin experimental study on the measurements of fuel kernel and particle coating properties of recent Korean, South African and US coated particle productions applying the respective qualification measures of each participating Member State. The summary report documents the results and conclusions achieved by the project and underlines the added value to contemporary knowledge on HTGR fuel.

Download or read book Handbook of Generation IV Nuclear Reactors written by Igor Pioro and published by Woodhead Publishing. This book was released on 2022-12-07 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Generation IV Nuclear Reactors, Second Edition is a fully revised and updated comprehensive resource on the latest research and advances in generation IV nuclear reactor concepts. Editor Igor Pioro and his team of expert contributors have updated every chapter to reflect advances in the field since the first edition published in 2016. The book teaches the reader about available technologies, future prospects and the feasibility of each concept presented, equipping them users with a strong skillset which they can apply to their own work and research. Provides a fully updated, revised and comprehensive handbook dedicated entirely to generation IV nuclear reactors Includes new trends and developments since the first publication, as well as brand new case studies and appendices Covers the latest research, developments and design information surrounding generation IV nuclear reactors

Download or read book Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment written by Jyeshtharaj Joshi and published by Woodhead Publishing. This book was released on 2019-06-15 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment presents the latest computational fluid dynamic technologies. It includes an evaluation of safety systems for reactors using CFD and their design, the modeling of Severe Accident Phenomena Using CFD, Model Development for Two-phase Flows, and Applications for Sodium and Molten Salt Reactor Designs. Editors Joshi and Nayak have an invaluable wealth of experience that enables them to comment on the development of CFD models, the technologies currently in practice, and the future of CFD in nuclear reactors. Readers will find a thematic discussion on each aspect of CFD applications for the design and safety assessment of Gen II to Gen IV reactor concepts that will help them develop cost reduction strategies for nuclear power plants. Presents a thematic and comprehensive discussion on each aspect of CFD applications for the design and safety assessment of nuclear reactors Provides an historical review of the development of CFD models, discusses state-of-the-art concepts, and takes an applied and analytic look toward the future Includes CFD tools and simulations to advise and guide the reader through enhancing cost effectiveness, safety and performance optimization

Download or read book Fundamental aspects of nuclear reactor fuel elements written by Donald R. Olander and published by . This book was released on 1976 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific Issues in Fuel Behaviour written by NEA Nuclear Science Committee. Task Force on Scientific Issues Related to Fuel Behaviour and published by OECD. This book was released on 1995 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dated January 1995

Download or read book Optimized Core Design and Fuel Management of a Pebble bed Type Nuclear Reactor written by Brian Boer and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Very High Temperature Reactor (VHTR) has been selected by the international Generation IV research initiative as one of the six most promising nuclear reactor concepts that are expected to enter service in the second half of the 21st century. As one of the fourth generation nuclear reactors, the VHTR is characterized by high plant efficiency and a high fuel discharge burn-up level. More specifically, the (pebble-bed type) High Temperature Reactor (HTR) is known for its inherently safe characteristics, coming from a negative temperature reactivity feedback, a low power density and a large thermal inertia of the core.

Download or read book Management of Nuclear Power Plant Projects written by IAEA and published by International Atomic Energy Agency. This book was released on 2020-11-25 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Member States intending to introduce a nuclear power programme will need to pass through several phases during the implementation. Experience shows that careful planning of the objectives, roles, responsibilities, interfaces and tasks to be carried out in different phases of a nuclear project is important for success. This publication presents a harmonized approach that may be used to structure the owner/operator management system and establish and manage nuclear projects and their development activities irrespective of the adopted approach. It has been developed from shared management practices and consolidated experiences provided by nuclear project management specialists through a series of workshops and working groups organized by the IAEA. The resultant publication presents a useful framework for the management of nuclear projects from initiation to closeout and captures international best practices.

Download or read book Nuclear Fuel Safety Criteria written by OECD Nuclear Energy Agency and published by OECD Publishing. This book was released on 2001 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents brief descriptions of 20 fuel-related safety criteria along with both the rationale for having such criteria and possible new design and operational issues which could have an effect on them.

Download or read book Approaches for Assessing the Economic Competitiveness of Small and Medium Sized Reactors written by International Atomic Energy Agency and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication assists existing and potential stakeholders in the definition of competitive approaches regarding design and deployment of small and medium sized reactors (SMR). It provides a framework for assessment of the investment attractiveness of nuclear power plant projects that adopts small reactor to be deployed in multi-modules and incorporate modularization construction technology. Main chapters detail past experience and future plans in several IAEA Member States and present the suite of models to assist designers and guide potential users on the economic performance and investment attractiveness of SMRs. A framework for the consolidated application of such models is also suggested. The annexes, contributed by Member States, provide in depth descriptions of different assessment models and give examples of their application.

Download or read book Thorium Energy for the Future written by A.K. Nayak and published by Springer. This book was released on 2019-01-30 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected proceedings of the ThEC15 conference. The book presents research findings on various facets of thorium energy, including exploration and mining, thermo-physical and chemical properties of fuels, reactor physics, challenges in fuel fabrication, thorium fuel cycles, thermal hydraulics and safety, material challenges, irradiation experiences, and issues and challenges for the design of advanced thorium fueled reactors. Thorium is more abundant than uranium and has the potential to provide energy to the world for centuries if used in a closed fuel cycle. As such, technologies for using thorium for power generation in nuclear reactors are being developed worldwide. Since there is a strong global thrust towards designing nuclear reactors with thorium-based fuel, this book will be of particular interest to nuclear scientists, reactor designers, regulators, academics and policymakers.

Download or read book Small Modular Reactors for Electricity Generation written by Jorge Morales Pedraza and published by Springer. This book was released on 2017-03-11 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a flexible, cost-effective energy alternative to large scale nuclear power reactors, this book examines the potential future use of small modular reactors for the generation of electricity in different regions. Exploring advanced nuclear technologies, chapters describe the current situation and perspective of the small modular reactors market (SMRs) in different regions around the word, including North and South America, Europe, Asia, Middle East and Africa. Particular attention is paid to the benefits of using these types of reactors for the generation of electricity, discussing their efficiency and reduced construction time, as well as exploring the main difficulties encountered in the development stage. Looking at the potential dangers that SMRs pose to the environment and population, the text presents the new safety measures that have been adopted in SMRs design to reduce future risk.

Download or read book Fission Product Processes In Reactor Accidents written by J. T. Rogers and published by CRC Press. This book was released on 2020-12-17 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Three Mile Island and Chernobyl nuclear incidents emphasized the need for the world-wide nuclear community to cooperate further and exchange the results of research in this field in the most open and effective manner. Recognizing the roles of heat and mass transfer in all aspects of fission-product behavior in sever reactor accidents, the Executive Committee of the International Centre for Heat and Mass Transfer organized a Seminar on Fission Product Transport Processes in Reactor Accidents. This book contains the eleven of the lectures and all the papers presented at the seminar along with four invited papers that were not presented and a summary of the closing session.

Download or read book Opportunities for Cogeneration with Nuclear Energy written by International Atomic Energy Agency and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents a comprehensive overview of various aspects relating to the application of cogeneration with nuclear energy, which may offer advantages such as increased efficiency, better cost effectiveness, and reduced environmental impact. The publication provides details on experiences, best practices and expectations for the foreseeable future of cogeneration with nuclear power technology and serves as a guide that supports newcomer countries. It includes information on systems and applications in various sectors, feasibility aspects, technical and economic details, and case studies.

Download or read book Thermal and Flow Design of Helium cooled Reactors written by Gilbert Melese and published by . This book was released on 1984 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This source book provides both an overview of gas-cooled reactors and a detailed look at the high-temperature gas-cooled reactor (HTGR). Taking a worldwide perspective, this book reviews the early development of the HTGR and explores potential future development and applications.

Download or read book Modelling of Fuel Behaviour in Design Basis Accidents and Design Extension Conditions written by International Atomic Energy Agency and published by . This book was released on 2020-07-30 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is the result of an IAEA technical meeting and reports on Member States' capabilities in modelling, predicting and improving their understanding of the behaviour of nuclear fuel under accident conditions. The main results and outcomes of a coordinated research project (CRP) on this topic are also presented.