Download or read book Recent Progress in General Topology II written by M. Husek and published by Elsevier. This book was released on 2002-11-13 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents surveys describing recent developments in most of the primary subfields ofGeneral Topology and its applications to Algebra and Analysis during the last decade. It follows freelythe previous edition (North Holland, 1992), Open Problems in Topology (North Holland, 1990) and Handbook of Set-Theoretic Topology (North Holland, 1984). The book was prepared inconnection with the Prague Topological Symposium, held in 2001. During the last 10 years the focusin General Topology changed and therefore the selection of topics differs slightly from thosechosen in 1992. The following areas experienced significant developments: Topological Groups, Function Spaces, Dimension Theory, Hyperspaces, Selections, Geometric Topology (includingInfinite-Dimensional Topology and the Geometry of Banach Spaces). Of course, not every important topic could be included in this book. Except surveys, the book contains several historical essays written by such eminent topologists as:R.D. Anderson, W.W. Comfort, M. Henriksen, S. Mardeŝić, J. Nagata, M.E. Rudin, J.M. Smirnov (several reminiscences of L. Vietoris are added). In addition to extensive author and subject indexes, a list of all problems and questions posed in this book are added. List of all authors of surveys: A. Arhangel'skii, J. Baker and K. Kunen, H. Bennett and D. Lutzer, J. Dijkstra and J. van Mill, A. Dow, E. Glasner, G. Godefroy, G. Gruenhage, N. Hindman and D. Strauss, L. Hola and J. Pelant, K. Kawamura, H.-P. Kuenzi, W. Marciszewski, K. Martin and M. Mislove and M. Reed, R. Pol and H. Torunczyk, D. Repovs and P. Semenov, D. Shakhmatov, S. Solecki, M. Tkachenko.
Download or read book General Topology written by Waclaw Sierpinski and published by Courier Dover Publications. This book was released on 2020-04-15 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Critically acclaimed text by distinguished mathematician presents detailed theory of Fréchet (V) spaces and comprehensive examination of their relevance to topological spaces, plus in-depth discussions of metric and complete spaces. 1956 edition.
Download or read book Recent Progress in General Topology II written by M. Husek and published by Elsevier. This book was released on 2002-11-13 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents surveys describing recent developments in most of the primary subfields of General Topology and its applications to Algebra and Analysis during the last decade. It follows freely the previous edition (North Holland, 1992), Open Problems in Topology (North Holland, 1990) and Handbook of Set-Theoretic Topology (North Holland, 1984). The book was prepared in connection with the Prague Topological Symposium, held in 2001. During the last 10 years the focus in General Topology changed and therefore the selection of topics differs slightly from those chosen in 1992. The following areas experienced significant developments: Topological Groups, Function Spaces, Dimension Theory, Hyperspaces, Selections, Geometric Topology (including Infinite-Dimensional Topology and the Geometry of Banach Spaces). Of course, not every important topic could be included in this book. Except surveys, the book contains several historical essays written by such eminent topologists as: R.D. Anderson, W.W. Comfort, M. Henriksen, S. Mardeŝić, J. Nagata, M.E. Rudin, J.M. Smirnov (several reminiscences of L. Vietoris are added). In addition to extensive author and subject indexes, a list of all problems and questions posed in this book are added. List of all authors of surveys: A. Arhangel'skii, J. Baker and K. Kunen, H. Bennett and D. Lutzer, J. Dijkstra and J. van Mill, A. Dow, E. Glasner, G. Godefroy, G. Gruenhage, N. Hindman and D. Strauss, L. Hola and J. Pelant, K. Kawamura, H.-P. Kuenzi, W. Marciszewski, K. Martin and M. Mislove and M. Reed, R. Pol and H. Torunczyk, D. Repovs and P. Semenov, D. Shakhmatov, S. Solecki, M. Tkachenko.
Download or read book General Topology written by John L. Kelley and published by Courier Dover Publications. This book was released on 2017-03-07 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive text for beginning graduate-level students and professionals. "The clarity of the author's thought and the carefulness of his exposition make reading this book a pleasure." — Bulletin of the American Mathematical Society. 1955 edition.
Download or read book Open Problems in Topology II written by Elliott M. Pearl and published by Elsevier. This book was released on 2011-08-11 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a collection of surveys of research problems in topology and its applications. The topics covered include general topology, set-theoretic topology, continuum theory, topological algebra, dynamical systems, computational topology and functional analysis.* New surveys of research problems in topology* New perspectives on classic problems* Representative surveys of research groups from all around the world
Download or read book Encyclopedia of General Topology written by K.P. Hart and published by Elsevier. This book was released on 2003-11-18 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed for the reader who wants to get a general view of the terminology of General Topology with minimal time and effort. The reader, whom we assume to have only a rudimentary knowledge of set theory, algebra and analysis, will be able to find what they want if they will properly use the index. However, this book contains very few proofs and the reader who wants to study more systematically will find sufficiently many references in the book.Key features:• More terms from General Topology than any other book ever published• Short and informative articles• Authors include the majority of top researchers in the field• Extensive indexing of terms
Download or read book General Topology I written by A.V. Arkhangel'skii and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of the encyclopaedia volumes devoted to general topology. It has two parts. The first outlines the basic concepts and constructions of general topology, including several topics which have not previously been covered in English language texts. The second part presents a survey of dimension theory, from the very beginnings to the most important recent developments. The principal ideas and methods are treated in detail, and the main results are provided with sketches of proofs. The authors have suceeded admirably in the difficult task of writing a book which will not only be accessible to the general scientist and the undergraduate, but will also appeal to the professional mathematician. The authors' efforts to detail the relationship between more specialized topics and the central themes of topology give the book a broad scholarly appeal which far transcends narrow disciplinary lines.
Download or read book General Topology II written by A. V. Arhangel' skii and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compactness is related to a number of fundamental concepts of mathemat ics. Particularly important are compact Hausdorff spaces or compacta. Com pactness appeared in mathematics for the first time as one of the main topo logical properties of an interval, a square, a sphere and any closed, bounded subset of a finite dimensional Euclidean space. Once it was realized that pre cisely this property was responsible for a series of fundamental facts related to those sets such as boundedness and uniform continuity of continuous func tions defined on them, compactness was given an abstract definition in the language of general topology reaching far beyond the class of metric spaces. This immensely extended the realm of application of this concept (including in particular, function spaces of quite general nature). The fact, that general topology provided an adequate language for a description of the concept of compactness and secured a natural medium for its harmonious development is a major credit to this area of mathematics. The final formulation of a general definition of compactness and the creation of the foundations of the theory of compact topological spaces are due to P.S. Aleksandrov and Urysohn (see Aleksandrov and Urysohn (1971)).
Download or read book General Topology written by Tom Richmond and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-07-06 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first half of the book provides an introduction to general topology, with ample space given to exercises and carefully selected applications. The second half of the text includes topics in asymmetric topology, a field motivated by applications in computer science. Recurring themes include the interactions of topology with order theory and mathematics designed to model loss-of-resolution situations.
Download or read book General Topology written by J. Dixmier and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a course in general topology, intended for students in the first year of the second cycle (in other words, students in their third univer sity year). The course was taught during the first semester of the 1979-80 academic year (three hours a week of lecture, four hours a week of guided work). Topology is the study of the notions of limit and continuity and thus is, in principle, very ancient. However, we shall limit ourselves to the origins of the theory since the nineteenth century. One of the sources of topology is the effort to clarify the theory of real-valued functions of a real variable: uniform continuity, uniform convergence, equicontinuity, Bolzano-Weierstrass theorem (this work is historically inseparable from the attempts to define with precision what the real numbers are). Cauchy was one of the pioneers in this direction, but the errors that slip into his work prove how hard it was to isolate the right concepts. Cantor came along a bit later; his researches into trigonometric series led him to study in detail sets of points of R (whence the concepts of open set and closed set in R, which in his work are intermingled with much subtler concepts). The foregoing alone does not justify the very general framework in which this course is set. The fact is that the concepts mentioned above have shown themselves to be useful for objects other than the real numbers.
Download or read book General Topology and Homotopy Theory written by I.M. James and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Students of topology rightly complain that much of the basic material in the subject cannot easily be found in the literature, at least not in a convenient form. In this book I have tried to take a fresh look at some of this basic material and to organize it in a coherent fashion. The text is as self-contained as I could reasonably make it and should be quite accessible to anyone who has an elementary knowledge of point-set topology and group theory. This book is based on a course of 16 graduate lectures given at Oxford and elsewhere from time to time. In a course of that length one cannot discuss too many topics without being unduly superficial. However, this was never intended as a treatise on the subject but rather as a short introductory course which will, I hope, prove useful to specialists and non-specialists alike. The introduction contains a description of the contents. No algebraic or differen tial topology is involved, although I have borne in mind the needs of students of those branches of the subject. Exercises for the reader are scattered throughout the text, while suggestions for further reading are contained in the lists of references at the end of each chapter. In most cases these lists include the main sources I have drawn on, but this is not the type of book where it is practicable to give a reference for everything.
Download or read book Modern General Topology written by Jun-Iti Nagata and published by Elsevier. This book was released on 2014-05-12 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bibliotheca Mathematica: A Series of Monographs on Pure and Applied Mathematics, Volume VII: Modern General Topology focuses on the processes, operations, principles, and approaches employed in pure and applied mathematics, including spaces, cardinal and ordinal numbers, and mappings. The publication first elaborates on set, cardinal and ordinal numbers, basic concepts in topological spaces, and various topological spaces. Discussions focus on metric space, axioms of countability, compact space and paracompact space, normal space and fully normal space, subspace, product space, quotient space, and inverse limit space, convergence, mapping, and open basis and neighborhood basis. The book then ponders on compact spaces and related topics, as well as product of compact spaces, compactification, extensions of the concept of compactness, and compact space and the lattice of continuous functions. The manuscript tackles paracompact spaces and related topics, metrizable spaces and related topics, and topics related to mappings. Topics include metric space, paracompact space, and continuous mapping, theory of inverse limit space, theory of selection, mapping space, imbedding, metrizability, uniform space, countably paracompact space, and modifications of the concept of paracompactness. The book is a valuable source of data for mathematicians and researchers interested in modern general topology.
Download or read book The General Topology of Dynamical Systems written by Ethan Akin and published by American Mathematical Soc.. This book was released on 1993 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent work in dynamical systems theory has both highlighted certain topics in the pre-existing subject of topological dynamics (such as the construction of Lyapunov functions and various notions of stability) and also generated new concepts and results. This book collects these results, both old and new, and organises them into a natural foundation for all aspects of dynamical systems theory.
Download or read book Lecture Notes On General Topology written by Guoliang Wang and published by World Scientific. This book was released on 2020-12-17 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as a one-semester course in general topology, a.k.a. point-set topology, for undergraduate students as well as first-year graduate students. Such a course is considered a prerequisite for further studying analysis, geometry, manifolds, and certainly, for a career of mathematical research. Researchers may find it helpful especially from the comprehensive indices.General topology resembles a language in modern mathematics. Because of this, the book is with a concentration on basic concepts in general topology, and the presentation is of a brief style, both concise and precise. Though it is hard to determine exactly which concepts therein are basic and which are not, the author makes efforts in the selection according to personal experience on the occurrence frequency of notions in advanced mathematics, and to related books that have received admirable reviews.This book also contains exercises for each chapter with selected solutions. Interrelationships among concepts are taken into account frequently. Twelve particular topological spaces are repeatedly exploited, which serve as examples to learn new concepts based on old ones.
Download or read book General Topology written by Stephen Willard and published by Courier Corporation. This book was released on 2012-07-12 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the best available reference introductions to general topology, this volume is appropriate for advanced undergraduate and beginning graduate students. Includes historical notes and over 340 detailed exercises. 1970 edition. Includes 27 figures.
Download or read book Elements of Mathematics written by Nicolas Bourbaki and published by . This book was released on 1966 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometric Aspects of General Topology written by Katsuro Sakai and published by Springer Science & Business Media. This book was released on 2013-07-22 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed for graduate students to acquire knowledge of dimension theory, ANR theory (theory of retracts), and related topics. These two theories are connected with various fields in geometric topology and in general topology as well. Hence, for students who wish to research subjects in general and geometric topology, understanding these theories will be valuable. Many proofs are illustrated by figures or diagrams, making it easier to understand the ideas of those proofs. Although exercises as such are not included, some results are given with only a sketch of their proofs. Completing the proofs in detail provides good exercise and training for graduate students and will be useful in graduate classes or seminars. Researchers should also find this book very helpful, because it contains many subjects that are not presented in usual textbooks, e.g., dim X × I = dim X + 1 for a metrizable space X; the difference between the small and large inductive dimensions; a hereditarily infinite-dimensional space; the ANR-ness of locally contractible countable-dimensional metrizable spaces; an infinite-dimensional space with finite cohomological dimension; a dimension raising cell-like map; and a non-AR metric linear space. The final chapter enables students to understand how deeply related the two theories are. Simplicial complexes are very useful in topology and are indispensable for studying the theories of both dimension and ANRs. There are many textbooks from which some knowledge of these subjects can be obtained, but no textbook discusses non-locally finite simplicial complexes in detail. So, when we encounter them, we have to refer to the original papers. For instance, J.H.C. Whitehead's theorem on small subdivisions is very important, but its proof cannot be found in any textbook. The homotopy type of simplicial complexes is discussed in textbooks on algebraic topology using CW complexes, but geometrical arguments using simplicial complexes are rather easy.
