Download or read book Geology written by Aurèle Parriaux and published by CRC Press. This book was released on 2018-10-31 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geology – Basics for Engineers (second edition) presents the physical and chemical characteristics of the Earth, the nature and the properties of rocks and unconsolidated deposits/sediments, the action of water, how the Earth is transformed by various phenomena at different scales of time and space. The book shows the engineer how to take geological conditions into account in their projects, and how to exploit a wide range of natural resources in an intelligent way, reduce geological hazards, and manage subsurface pollution. This second edition has been fully revised and updated. Through a problem-based learning approach, this instructional text imparts knowledge and practical experience to engineering students (undergraduate and graduate level), as well as to experts in the fields of civil engineering, environmental engineering, earth sciences, architecture, land and urban planning. Free digital supplements to the book, found on the book page, contain solutions to the problems and animations that show additional facets of the living Earth. The original French edition of the book (2007) won the prestigious Roberval Prize, an international contest organized by the University of Technology of Compiegne in collaboration with the General Council of Oise, France. Geology, Basics for Engineers was selected out of a total of 110 candidates. The jury praised the book as a "very well conceived teaching textbook" and underscored its highly didactic nature, as well as the excellent quality of its illustrations. Features: Offers an exhaustive outline of the methods and techniques used in geology, with a study of the nature and properties of the principal soils and rocks Helps students understand how geological conditions should be taken into account by the engineer by taking a problem-solving approach Contains extensive figures and examples, solutions to probems, and illustrative animations Presents a highly didactic and synthetic work intended for engineering students as well as experts in civil engineering, environmental engineering, the earth sciences, and architecture

Download or read book General Geology for Engineers written by Alan E. Kehew and published by . This book was released on 1988 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manual of Applied Geology for Engineers written by Institution of Civil Engineers (Great Britain) and published by Thomas Telford. This book was released on 1976 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: All engineering structures react with the ground, and most structures make use of materials extracted from the earth. While an engineer cannot be expected to be also an expert geologist, he must have a working knowledge of the subject if his structures are to be economically designed, safely built and safely used. He must also be able to recognise where and when he needs the advice of a specialist. A Manual of Applied Geology is designed as a guide for practising engineers. A team of distinguished engineers and scientists has been assembled to present the basic information which an engineer needs and to explain how best to use this information to deal with problems in his work. Chaptes cover general theory, Formation of rocks, their properties and identification, landforms and soils, geophysical methods, maps and other information sources. the particular problems of terrain evaluation, site selection and investigation and common construction problems (including groundwater control, stability, foundations and underground work) are examined and there are chapters on materials and hydrogeology.Aimed principally at the engineer who is meeting geological problems in his everyday work, this generously illustrated volume will also be useful as an introduction to the subject for first degree engineering students

Download or read book Foundations of Engineering Geology written by Tony Waltham and published by CRC Press. This book was released on 2018-10-08 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in full colour, the third edition of this well established book provides a readable and highly illustrated overview of the aspects of geology that are most significant to civil engineers. Sections in the book include those devoted to the main rock types, weathering, ground investigation, rock mass strength, failures of old mines, subsidence on peats and clays, sinkholes on limestone and chalk, water in landslides, slope stabilization and understanding ground conditions. The roles of both natural and man-induced processes are assessed, and this understanding is developed into an appreciation of the geological environments potentially hazardous to civil engineering and construction projects. For each style of difficult ground, available techniques of site investigation and remediation are reviewed and evaluated. Each topic is presented as a double page spread with a careful mix of text and diagrams, with tabulated reference material on parameters such as bearing strength of soils and rocks. This new edition has been comprehensively updated and covers the entire spectrum of topics of interest for both students and practitioners in the field of civil engineering.

Download or read book Geology for Civil Engineers written by C. Gribble and published by CRC Press. This book was released on 2017-12-21 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seasoned textbook introduces geology for civil engineering students. It covers minerals and rocks, superficial deposits and the distribution of rocks at or below the surface. It then looks at groundwater and gives guidance on the exploration of a site before looking at the civil engineering implications of rocks and the main geological factors which affect typical engineering projects.

Download or read book A Geology for Engineers written by F.G.H. Blyth and published by CRC Press. This book was released on 2017-12-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: No engineering structure can be built on the ground or within it without the influence of geology being experienced by the engineer. Yet geology is an ancillary subject to students of engineering and it is therefore essential that their training is supported by a concise, reliable and usable text on geology and its relationship to engineering. In this book all the fundamental aspects of geology are described and explained, but within the limits thought suitable for engineers. It describes the structure of the earth and the operation of its internal processes, together with the geological processes that shape the earth and produce its rocks and soils. It also details the commonly occurring types of rock and soil, and many types of geological structure and geological maps. Care has been taken to focus on the relationship between geology and geomechanics, so emphasis has been placed on the geological processes that bear directly upon the composition, structure and mechanics of soil and rocks, and on the movement of groundwater. The descriptions of geological processes and their products are used as the basis for explaining why it is important to investigate the ground, and to show how the investigations may be conducted at ground level and underground. Specific instruction is provided on the relationship between geology and many common activities undertaken when engineering in rock and soil.

Download or read book Principles of Engineering Geology written by P.B. Attewell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1075 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Engineering geology' is one of those terms that invite definition. The American Geological Institute, for example, has expanded the term to mean 'the application of the geological sciences to engineering practice for the purpose of assuring that the geological factors affecting the location, design, construction, operation and mainten ance of engineering works are recognized and adequately provided for'. It has also been defined by W. R. Judd in the McGraw-Hill Encyclopaedia of Science and Technology as 'the application of education and experience in geology and other geosciences to solve geological problems posed by civil engineering structures'. Judd goes on to specify those branches of the geological or geo-sciences as surface (or surficial) geology, structural/fabric geology, geohydro logy, geophysics, soil and rock mechanics. Soil mechanics is firmly included as a geological science in spite of the perhaps rather unfortunate trends over the years (now happily being reversed) towards purely mechanistic analyses which may well provide acceptable solutions for only the simplest geology. Many subjects evolve through their subject areas from an interdisciplinary background and it is just such instances that pose the greatest difficulties of definition. Since the form of educational development experienced by the practitioners of the subject ulti mately bears quite strongly upon the corporate concept of the term 'engineering geology', it is useful briefly to consider that educational background.

Download or read book Engineering Geology written by Q Zaruba and published by Elsevier. This book was released on 2012-12-02 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Geology attempts to provide an understanding of relations between the geology of a building site and the engineering structure. It presents examples taken from real-life experience and practice to provide evidence for the significance of engineering geology in planning, design, construction, and maintenance of engineering structures. The book begins with an introduction of geological investigations, distinguishing between the reconnaissance investigation, the detailed investigation, and investigation during construction. It then explains the significance of geological maps and sections; the mechanical behavior of rocks; subsurface investigation for engineering construction; and geophysical methods. The remaining chapters discuss the physical and chemical weathering of rocks; slope movements; and geological investigations for buildings, roads and railways, tunnels, and hydraulic structures. This book is intended particularly for civil engineering students and students of engineering geology in the university faculties of natural sciences. It describes geological features so as to be comprehensible to Technical College students and to explain construction problems intelligibly for geology students. The book will also be of assistance to planners, civil engineers, and graduate engineering geologists.

Download or read book Geology for Ground Engineering Projects written by Chris J. N. Fletcher and published by CRC Press. This book was released on 2018-09-03 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges the Gap between Geology and Ground Engineering High-quality geological models are crucial for ground engineering projects, but many engineers are not always at ease with the geological terminology and analysis presented in these models, nor with their implications and limitations. Project engineers need to have a sound comprehension of the geological models presented to them, and to be able to discuss the models in so far as they might impinge on the design, safety and possible budgetary or time constraints of the project. They should also fully understand how site investigation data and samples are used to develop and substantiate geological models. Geology for Ground Engineering Projects provides a comprehensive presentation of, and insight into, the critical geological phenomena that may be encountered in many engineering projects, for example rock contact relationships, weathering and karst phenomena in tropical areas, composition of fault zones and variability of rock discontinuities. Examples are provided from around the world, including Southeast Asia, Europe, North and South America, China and India. Comprehensive and well-illustrated, this definitive book: Describes the important geological phenomena that could affect ground engineering projects Provides a practical knowledge-base for relevant geological processes Addresses common geological issues and concerns Rocks are described in relation to the environment of their formation, highlighting the variation in composition, distribution and geotechnical properties that can be expected within a variety of rock associations. Case studies, where geology has been a vital factor, are included. These are written by the project engineers or geologists responsible for the projects. Geology for Ground Engineering Projects is well illustrated with color diagrams and photographs. Readers are directed to satellite images of selected areas to explore for themselves many of the geological features described in this book.

Download or read book Encyclopedia of Engineering Geology written by Peter T. Bobrowsky and published by Springer. This book was released on 2018-08-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the multi-disciplinary topic of engineering geology and the environment, one of the fastest growing, most relevant and applied fields of research and study within the geosciences. It covers the fundamentals of geology and engineering where the two fields overlap and, in addition, highlights specialized topics that address principles, concepts and paradigms of the discipline, including operational terms, materials, tools, techniques and methods as well as processes, procedures and implications. A number of well known and respected international experts contributed to this authoritative volume, thereby ensuring proper geographic representation, professional credibility and reliability. This superb volume provides a dependable and ready source of information on approximately 300 topical entries relevant to all aspects of engineering geology. Extensive illustrations, figures, images, tables and detailed bibliographic citations ensure that the comprehensively defined contributions are broadly and clearly explained. The Encyclopedia of Engineering Geology provides a ready source of reference for several fields of study and practice including civil engineers, geologists, physical geographers, architects, hazards specialists, hydrologists, geotechnicians, geophysicists, geomorphologists, planners, resource explorers, and many others. As a key library reference, this book is an essential technical source for undergraduate and graduate students in their research. Teachers/professors can rely on it as the final authority and the first source of reference on engineering geology related studies as it provides an exceptional resource to train and educate the next generation of practitioners.

Download or read book Geology Applied to Engineering written by Terry R. West and published by Waveland Press. This book was released on 2018-03-19 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geology Applied to Engineering bridges the gap between the two fields through its versatile application of the physical aspects of geology to engineering design and construction. The Second Edition elucidates real-world practices, concerns, and issues for today’s engineering geologists and geotechnical engineers. Both undergraduate and graduate students will benefit from the book’s thorough coverage, as will professionals involved in assessing sites for engineering projects, evaluating construction materials, developing water resources, and conducting tests using industry standards. West and Shakoor offer expanded coverage of important topics such as slope stability and ground subsidence and significant fields in engineering geology, such as highways, dams, tunnels, and rock blasting. In order to allow for the diverse backgrounds of geologists and engineers, material on the properties of minerals, rocks, and soil provides a working knowledge of applied geology as a springboard to more comprehensive subjects in engineering. Example problems throughout the text demonstrate the practical applications of soil mechanics, rock weathering and soils, structural geology, groundwater, and geophysics. Thought-provoking and challenging exercises supplement core concepts such as determining shear strength and failure conditions, calculating the depth needed for borings, reading and analyzing maps, and constructing stratigraphic cross sections.

Download or read book Engineering General Geology written by P. T. Sawant and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Geology and Geotechnics written by F. G. Bell and published by Elsevier. This book was released on 2013-10-22 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Geology and Geotechnics discusses engineering survey methods. The book is comprised of 12 chapters that cover several concerns in engineering, such as building foundations, slopes, and construction materials. Chapter 1 covers site investigation, while Chapter 2 tackles geophysical exploration. Chapter 3 deals with slope and open excavation, while Chapter 4 discusses subsurface excavation. Foundation for buildings, reservoir, and dams and dam sites are also covered in the book. A chapter then tackles hydrogeology and underground water supply. The text also encompasses river and beach engineering. The last two chapters cover engineering seismology and construction materials. This book will be of great use to researchers, practitioners, and students of engineering.

Download or read book Engineering Geology for Society and Territory Volume 2 written by Giorgio Lollino and published by Springer. This book was released on 2014-09-16 with total page 2177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is one out of 8 IAEG XII Congress volumes, and deals with Landslide processes, including: field data and monitoring techniques, prediction and forecasting of landslide occurrence, regional landslide inventories and dating studies, modeling of slope instabilities and secondary hazards (e.g. impulse waves and landslide-induced tsunamis, landslide dam failures and breaching), hazard and risk assessment, earthquake and rainfall induced landslides, instabilities of volcanic edifices, remedial works and mitigation measures, development of innovative stabilization techniques and applicability to specific engineering geological conditions, use of geophysical techniques for landslide characterization and investigation of triggering mechanisms. Focuses is given to innovative techniques, well documented case studies in different environments, critical components of engineering geological and geotechnical investigations, hydrological and hydrogeological investigations, remote sensing and geophysical techniques, modeling of triggering, collapse, run out and landslide reactivation, geotechnical design and construction procedures in landslide zones, interaction of landslides with structures and infrastructures and possibility of domino effects. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues, and approaches. The congress topics and subject areas of the 8 IAEG XII Congress volumes are: Climate Change and Engineering Geology. Landslide Processes. River Basins, Reservoir Sedimentation and Water Resources. Marine and Coastal Processes. Urban Geology, Sustainable Planning and Landscape Exploitation. Applied Geology for Major Engineering Projects. Education, Professional Ethics and Public Recognition of Engineering Geology. Preservation of Cultural Heritage.

Download or read book ENGINEERING GEOLOGY FOR CIVIL ENGINEERS written by P. C. VARGHESE and published by PHI Learning Pvt. Ltd.. This book was released on 2011-12-24 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geology is the science of earth's crust (lithosphere) consisting of rocks and soils. While mining and mineralogical engineers are more interested in rocks, their petrology (formation) and mineralogy, civil engineers are equally interested in soils and rocks, in their formations, and also in their properties for civil engineering design and construction. This book is so written that the subject can easily be taught by a civil engineering faculty member specialised in soil mechanics. Dexterously organized into four parts, this book in Part I (Chapters 1 to 11) deals with the formation of rocks and soils. The classification of soils, lake deposits, coastal deposits, wind deposits along with marshes and bogs are described in Part II (Chapters 12 to 20). As the book advances, it deals with the civil engineering problems connected with soils and rocks such as landslides, rock slides, mudflow, earthquakes, tsunami and other natural phenomena in Part III (Chapters 21 to 24). Finally, in Part IV (Chapters 25 to 30), this text discusses the allied subjects like the origin and nature of cyclones, rock mass classification and soil formation. Designed to serve as a textbook for the undergraduate students of civil engineering, this book is equally useful for the practising civil engineers. SALIENT FEATURES : Displays plenty of figures to clarify the concepts Includes chapter-end review exercises to enhance the problem-solving skills of the students Summary at the end of each chapter brings into focus the essence of the chapter Appendices at the end of the text supply extra information on important topics

Download or read book Engineering Geology for Underground Rocks written by Suping Peng and published by Springer Science & Business Media. This book was released on 2007-10-14 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professionals and students in any geology-related field will find this an essential reference. It clearly and systematically explains underground engineering geology principles, methods, theories and case studies. The authors lay out engineering problems in underground rock engineering and how to study and solve them. The book specially emphasizes mechanical and hydraulic couplings in rock engineering for wellbore stability, mining near aquifers and other underground structures where inflow is a problem.

Download or read book Engineering Geology written by Subinoy Gangopadhyay and published by OUP India. This book was released on 2013-01-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Geology will serve as a textbook for the undergraduate and postgraduate students of engineering geology, applied geology, mining and civil engineering. It will also serve as a reference text for civil engineers and professional geologists.