Download or read book Safety of Genetically Engineered Foods written by National Research Council and published by National Academies Press. This book was released on 2004-07-08 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assists policymakers in evaluating the appropriate scientific methods for detecting unintended changes in food and assessing the potential for adverse health effects from genetically modified products. In this book, the committee recommended that greater scrutiny should be given to foods containing new compounds or unusual amounts of naturally occurring substances, regardless of the method used to create them. The book offers a framework to guide federal agencies in selecting the route of safety assessment. It identifies and recommends several pre- and post-market approaches to guide the assessment of unintended compositional changes that could result from genetically modified foods and research avenues to fill the knowledge gaps.
Download or read book Genetically Engineered Crops written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-28 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically engineered (GE) crops were first introduced commercially in the 1990s. After two decades of production, some groups and individuals remain critical of the technology based on their concerns about possible adverse effects on human health, the environment, and ethical considerations. At the same time, others are concerned that the technology is not reaching its potential to improve human health and the environment because of stringent regulations and reduced public funding to develop products offering more benefits to society. While the debate about these and other questions related to the genetic engineering techniques of the first 20 years goes on, emerging genetic-engineering technologies are adding new complexities to the conversation. Genetically Engineered Crops builds on previous related Academies reports published between 1987 and 2010 by undertaking a retrospective examination of the purported positive and adverse effects of GE crops and to anticipate what emerging genetic-engineering technologies hold for the future. This report indicates where there are uncertainties about the economic, agronomic, health, safety, or other impacts of GE crops and food, and makes recommendations to fill gaps in safety assessments, increase regulatory clarity, and improve innovations in and access to GE technology.
Download or read book Genetic Modification of Plants written by Frank Kempken and published by Springer Science & Business Media. This book was released on 2009-12-15 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conceived with the aim of sorting fact from fiction over genetically modified (GM) crops, this book brings together the knowledge of 30 specialists in the field of transgenic plants. It covers the generation and detection of these plants as well as the genetic traits conferred on transgenic plants. In addition, the book looks at a wide variety of crops, ornamental plants and tree species that are subject to genetic modifications, assessing the risks involved in genetic modification as well as the potential economic benefits of the technology in specific cases. The book’s structure, with fully cross-referenced chapters, gives readers a quick access to specific topics, whether that is comprehensive data on particular species of ornamentals, or coverage of the socioeconomic implications of GM technology. With an increasing demand for bioenergy, and the necessary higher yields relying on wider genetic variation, this book supplies all the technical details required to move forward to a new era in agriculture.
Download or read book Plant Biotechnology written by Adrian Slater and published by OUP Oxford. This book was released on 2008-03-27 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Biotechnology presents a balanced, objective exploration of the technology behind genetic manipulation, and its application to the growth and cultivation of plants. The book describes the techniques underpinning genetic manipulation and makes extensive use of case studies to illustrate how this influential tool is used in practice.
Download or read book Genetic Engineering of Plants written by National Research Council and published by National Academies Press. This book was released on 1984-02-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book...is, in fact, a short text on the many practical problems...associated with translating the explosion in basic biotechnological research into the next Green Revolution," explains Economic Botany. The book is "a concise and accurate narrative, that also manages to be interesting and personal...a splendid little book." Biotechnology states, "Because of the clarity with which it is written, this thin volume makes a major contribution to improving public understanding of genetic engineering's potential for enlarging the world's food supply...and can be profitably read by practically anyone interested in application of molecular biology to improvement of productivity in agriculture."
Download or read book Field Testing Genetically Modified Organisms written by National Research Council and published by National Academies Press. This book was released on 1989-02-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Potential benefits from the use of genetically modified organismsâ€"such as bacteria that biodegrade environmental pollutantsâ€"are enormous. To minimize the risks of releasing such organisms into the environment, regulators are working to develop rational safeguards. This volume provides a comprehensive examination of the issues surrounding testing these organisms in the laboratory or the field and a practical framework for making decisions about organism release. Beginning with a discussion of classical versus molecular techniques for genetic alteration, the volume is divided into major sections for plants and microorganisms and covers the characteristics of altered organisms, past experience with releases, and such specific issues as whether plant introductions could promote weediness. The executive summary presents major conclusions and outlines the recommended decision-making framework.
Download or read book Genetic Engineering of Crop Plants written by G. W. Lycett and published by Elsevier. This book was released on 2013-10-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetic Engineering of Crop Plants is a proceeding of The 49th Nottingham Easter School in Agricultural Science, which was held at Sutton Bonington on April 17-21, 1989. This symposium discussed progress in the generation of crop species resistant to herbicides, viruses, and insects. The book discusses topics such as the genetic manipulation in plants; genetic engineering of crops for insect and herbicide resistance; the expression of heat shock gene in transgenic plants; and tuber-specific gene expression. The book also covers topics such as regulation of gene expression in transgenic tomato plants; the molecular biology of pea seed development; and the regulatory elements of maize storage protein genes. The text is recommended for experts in the field of botany, agriculture, and genetics who would like to know more about the improvement of crop plants through genetics.
Download or read book Genetically Modified Pest Protected Plants written by National Research Council and published by National Academies Press. This book was released on 2000-08-23 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the risks and benefits of crops that are genetically modified for pest resistance, the urgency of establishing an appropriate regulatory framework for these products, and the importance of public understanding of the issues. The committee critically reviews federal policies toward transgenic products, the 1986 coordinated framework among the key federal agencies in the field, and rules proposed by the Environmental Protection Agency for regulation of plant pesticides. This book provides detailed analyses of: Mechanisms and results of genetic engineering compared to conventional breeding for pest resistance. Review of scientific issues associated with transgenic pest-protected plants, such as allergenicity, impact on nontarget plants, evolution of the pest species, and other concerns. Overview of regulatory framework and its use of scientific information with suggestions for improvements.
Download or read book Genetically Modified Plants written by Roger Hull and published by Academic Press. This book was released on 2009-07-07 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: A transgenic organism is a plant, animal, bacterium, or other living organism that has had a foreign gene added to it by means of genetic engineering. Transgenic plants can arise by natural movement of genes between species, by cross-pollination based hybridization between different plant species (which is a common event in flowering plant evolution), or by laboratory manipulations by artificial insertion of genes from another species. Methods used in traditional breeding that generate transgenic plants by non-recombinant methods are widely familiar to professional plant scientists, and serve important roles in securing a sustainable future for agriculture by protecting crops from pest and helping land and water to be used more efficiently.There is worldwide interest in the biosafety issues related to transgenic crops because of issues such as increased pesticide use, increased crop and weed resistance to pesticides, gene flow to related plant species, negative effects on nontarget organisms, and reduced crop and ecosystem diversity. This book is intended to provide the basic information for a wide range of people involved in the release of transgenic crops. These will include scientists and researchers in the initial stage of developing transgenic products, industrialists, and decision makers. It will be of particular interest to plant scientists taking up biotechnological approaches to agricultural improvement for developing nations. Discusses traditional and future technology for genetic modification Compares conventional non-GM approaches and genetic modification Presents a risk assessment methodology for GM techniques Details mitigation techniques for human and environmental effects
Download or read book Genetic Engineering of Plants for Crop Improvement written by Rup Lal and published by CRC Press. This book was released on 2020-01-31 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetic Engineering of Plants for Crop Improvement discusses current genetic engineering methods for plants and addresses the commercial opportunities for transgenic plants. Topics covered include Agrobacterium-mediated transformations, the use of electroporation, PEG-mediated transformation, microinjection, the microprojectile bombardment method, and the electrical discharge particle acceleration method. A concise account of the resistance of transgenic plants to insect attack, viral infection, and herbicides has also been provided. Possibilities for genetic manipulation for proteins that have superior nutritional properties are discussed, and a brief account of tests confirming the safety and commercial validity of transgenic plants is included. A valuable source of information for researchers and students in plant biotechnology, plant gene manipulation, molecular biology, and all areas of the life sciences.
Download or read book Advances in Gene Technology Molecular Genetics of Plants and Animals written by Kathleen Downey and published by Elsevier. This book was released on 2013-10-22 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Gene Technology: Molecular Genetics of Plants and Animals contains the proceedings of the Miami Winter Symposium held in January 1983 in Miami, Florida. The papers explore advances in the molecular genetics of plants and animals and cover a wide range of topics such as genetic manipulation of plants; plant cell cultures, regeneration, and somatic cell fusion; and nitrogen fixation. Practical applications of gene technology with plants are also discussed. Comprised of 84 chapters, this volume begins with an overview of how plants manufacture from carbon dioxide and water all of their substances, paying particular attention to the path of carbon in photosynthesis. The organization of the plant genome is then considered, along with techniques for cell culture, regeneration, and somatic cell fusion; vector systems; and nitrogen fixation. Some chapters focus on gene transfer by protoplast fusion; somatic cell genetic systems in corn; regulation of transcription of the nitrogen fixation operons; and leghemoglobin and nodulin genes of soybean. The final section is devoted to practical applications of gene technology to plants and to technology frontiers in animal biology, in particular embryonic development and vaccines and diagnostic methods for animal diseases. This book should be of value to molecular geneticists.
Download or read book Seeds of Concern written by David Ronald Murray and published by UNSW Press. This book was released on 2003 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: How are genetically modified plants produced? Which breeding goals are worthwhile, and which are not? Can the escape of transferred genes be controlled? Why have the first transgenic plants been released without full appreciation of the consequences? How dangerous are bacterial proteins produced in plant foods? Is anyone monitoring the unexpected effects of gene transfer? Will genetically modified plants ever be acceptable to organic growers? These are some of the important questions canvassed in this book, written with the insight of an experienced Australian plant scientist and conservationist.
Download or read book Testing for Genetic Manipulation in Plants written by John Flex Jackson and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular Methods of Plant Analysis Concept of the Series The powerful recombinant DNA technology and related developments have had an enormous impact on molecular biology. Any treatment of plant analy sis must make use of these new methods. Developments have been so fast and the methods so powerful that the editors of Modern Methods of Plant Analy sis have now decided to rename the series Molecular Methods of Plant Analy sis. This will not change the general aims of the series, but best describes the thrust and content of the series as we go forward into the new millennium. This does not mean that all chapters a priori deal only with the methods of molecular biology, but rather that these methods are to be found in many chapters together with the more traditional methods of analysis which have seen recent advances. The numbering of the volumes of the series therefore continues on from 20, which is the most recently published volume under the title Modern Methods of Plant Analysis. As indicated for previous volumes, the methods to be found in Molecular Methods of Plant Analysis are described critically, with hints as to their limi tations, references to original papers and authors being given, and the chap ters written so that there is little need to consult other texts to carry out the All authors have been chosen because of their methods of analysis described.
Download or read book Plant Genetic Engineering written by John H. Dodds and published by Cambridge University Press. This book was released on 1985-10-31 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 1985 book describes techniques in plant genetic research and the practical application of genetic engineering for molecular biologists.
Download or read book Engineering and Environmental Challenges written by National Academy of Engineering and published by National Academies Press. This book was released on 2002-05-29 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with the challenges presented by climate change or rapid urban development require cooperation and expertise from engineering, social and natural sciences. Earth systems engineering is an emerging area of multidisclinary study that takes a holistic view of natural and human system interactions to better understand complex systems. It seeks to develop methods and tools that enable technically sound and ethically wise decisions. Engineering and Environmental Challenges presents the proceedings of a National Academy of Engineering public symposium on Earth systems engineering.
Download or read book Genetically Engineered Foods written by Alexandru Mihai Grumezescu and published by Academic Press. This book was released on 2017-09-01 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically Engineered Foods, Volume 6 in the Handbook of Food Bioengineering series, is a solid reference for researchers and professionals needing information on genetically engineered foods in human and animal diets. The volume discusses awareness, benefits vs. disadvantages, regulations and techniques used to obtain, test and detect genetically modified plants and animals. An essential resource offering informed perspectives on the potential implications of genetically engineered foods for humans and society. Written by a team of scientific experts who share the latest advances to help further more evidence-based research and educate scientists, academics and government professionals about the safety of the global food supply. Provides in-depth coverage of the issues surrounding genetic engineering in foods Includes hot topic areas such as nutragenomics and therapeutics to show how genetically engineered foods can promote health and potentially cure disease Presents case studies where genetically engineered foods can increase production in Third World countries to promote food security Discusses environmental and economic impacts, benefits and risks to help inform decisions
Download or read book New Directions for Biosciences Research in Agriculture written by National Research Council and published by National Academies Press. This book was released on 1985-01-01 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by an integrated committee of plant and animal scientists, this review of newer molecular genetic techniques and traditional research methods is presented as a compilation of high-reward opportunities for agricultural research. Directed to the Agricultural Research Service and the agricultural research community at large, the volume discusses biosciences research in genetic engineering, animal science, plant science, and plant diseases and insect pests. An optimal climate for productive research is discussed.
