Download or read book Gels and Other Soft Amorphous Solids written by Ferenc Horkay and published by . This book was released on 2019-08 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gels are ubiquitous both in materials science and biology. Interest in the behavior of this class of soft materials has increased significantly in the last decades as new experimental approaches have been developed to synthesize and characterize gels, and as theoretical and computational methods have advanced to model the structure and properties of these complex materials. For example, molecular simulation is now an essential tool to investigate gels and other types of soft matter where experimental measurements are not possible. The growth of this field to include applications in biology and medicine as also provided much impetus to gels research. The goal of this volume is to discuss recent progress in gel science. The chapters cover a wide variety of topics from polymer chemistry, physics, materials science and engineering, reflecting the interdisciplinary character of this field. A knowledge of the physical and chemical behavior of gels is essential for understanding, designing, and controlling material properties and performance. Gels can be synthesized with either flexible or stiff chains, linear or branched, and their length can also be tailored, etc. The network chains can be bonded to each other by chemical crosslinks or physical bonds involving van der Waals interactions, dipole-dipole interactions, hydrogen or ionic bonds, or pi-pi or pi-charge interactions. In addition to traditional polymer gels, this volume also focuses on low molecular mass organic gelators, relatively new, but rapidly growing, research direction in gel science. Special attention is devoted to the diverse applications of gels; using hydrogels for cleaning the painted surface of artwork (conservation of cultural heritage such as paintings and sculptures), developing advanced drug delivery systems, investigating the mechanism of setting of cement and hardening of concrete, etc.
Download or read book Polymer Gels written by D. DeRossi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a series of papers originally presented at the Symposium on Polymer Gels organized and sponsored by the Research Group on Polymer Gels,The Society of Polymer Science of Japan and co-sponsored by the Science and Technology Agency (ST A) and MIT!, Japan. The Symposium took place at Tsukuba Science City on 18th and 19th September, 1989. Recognized experts in their fields were invited to speak and there was a strong attendance from government, academic and industrial research centers. The purpose of the Symposium was to review the state of the art and to present and discuss recent progress in the understanding of the behavioral properties of polymer gels and their application to biomedical, environmental and robotic fields. Most of the papers and related discussions concentrated on the swelling behavior of hydrogels and chemomechanical systems, both artificial and naturally occurring, in which external stimuli of a physical or chemical nature control energy transformation or signal transduction. The recent great interest in chemomechanical systems based on polymer gels has stimulated considerable effort towards the development of new sensors and actuators, controllable membrane separation processes, and delivery systems in which the functions of sensing, processing and actuation are all built into the polymeric network device. Artificial chemomechanical systems, through the use of environmentally sensitive polymer gels, are emerging as interesting materials for mimicking basic processes previously only confined to the biological world, and commercially viable applications are also foreseen in the not-too-distant future.
Download or read book Fluids Colloids and Soft Materials written by Alberto Fernandez-Nieves and published by John Wiley & Sons. This book was released on 2016-05-09 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a compilation of self-contained chapters covering a wide range of topics within the broad field of soft condensed matter. Each chapter starts with basic definitions to bring the reader up-to-date on the topic at hand, describing how to use fluid flows to generate soft materials of high value either for applications or for basic research. Coverage includes topics related to colloidal suspensions and soft materials and how they differ in behavior, along with a roadmap for researchers on how to use soft materials to study relevant physics questions related to geometrical frustration.
Download or read book Molecular Gels written by Richard G. Weiss and published by Springer Science & Business Media. This book was released on 2006-06-30 with total page 969 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Molecular Gels: Materials with Self-Assembled Fibrillar Networks" is a comprehensive treatise on gelators, especially low molecular-mass gelators and the properties of their gels. The structures and modes of formation of the self-assembled fibrillar networks (SAFINs) that immobilize the liquid components of the gels are discussed experimentally and theoretically. The spectroscopic, rheological, and structural features of the different classes of low molecular-mass gelators are also presented. Many examples of the application of the principal analytical techniques for investigation of molecular gels (including SANS, SAXS, WAXS, UV-vis absorption, fluorescence and CD spectroscopies, scanning electron, transmission electron and optical microscopies, and molecular modeling) are presented didactically and in-depth, as are several of the theories of the stages of aggregation of individual low molecular-mass gelator molecules leading to SAFINs. Several actual and potential applications of molecular gels in disparate fields (from silicate replication of nanostructures to art conservation) are described. Special emphasis is placed on perspectives for future developments. This book is an invaluable resource for researchers and practitioners either already researching self-assembly and soft matter or new to the area. Those who will find the book useful include chemists, engineers, spectroscopists, physicists, biologists, theoreticians, and materials scientists.
Download or read book Polymeric Gels written by Kunal Pal and published by Woodhead Publishing. This book was released on 2018-06-15 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Gels: Characterization, Properties and Biomedical Applications covers the fundamentals and applications of polymeric gels. Particular emphasis is given to their synthesis, properties and characteristics, with topics such as natural, synthetic, and smart polymeric gels, medical applications, and advancements in conductive and magnetic gels presented. The book covers the basics and applications of hydrogels, providing readers with a comprehensive guide on the types of polymeric gels used in the field of biomedical engineering. - Provides guidance for decisions on the suitability and appropriateness of a synthetic route and characterization technique for particular polymeric networks - Analyzes and compares experimental data - Presents in-depth information on the physical properties of polymeric gels using mathematical models - Uses an interdisciplinary approach to discuss potential new applications for both established polymeric gels and recent advances
Download or read book Physical Gels from Biological and Synthetic Polymers written by Madeleine Djabourov and published by Cambridge University Press. This book was released on 2013-05-16 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a unique perspective on state-of-the-art physical gels, this interdisciplinary guide provides a complete, critical analysis of the field and highlights recent developments. It shows the interconnections between the key aspects of gels, from molecules and structure through to rheological and functional properties, with each chapter focusing on a different class of gel. There is also a final chapter covering innovative systems and applications, providing the information needed to understand current and future practical applications of gels in the pharmaceutical, agricultural, cosmetic, chemical and food industries. Many research teams are involved in the field of gels, including theoreticians, experimentalists and chemical engineers, but this interdisciplinary book collates and rationalises the many different points of view to provide a clear understanding of these complex systems for researchers and graduate students.
Download or read book Introduction to Sol Gel Processing written by Alain C. Pierre and published by Springer Nature. This book was released on 2020-03-10 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad, general introduction to the processing of Sol-Gel technologies. This updated volume serves as a general handbook for researchers and students entering the field. This new edition provides updates in fields that have undergone rapid developments, such as Ceramics, Catalysis, Chromatropgraphy, biomaterials, glass science, and optics. It provides a simple, compact resource that can also be used in graduate-level materials science courses.
Download or read book Liquid Crystal Elastomers written by Mark Warner and published by Oxford University Press. This book was released on 2007-04-05 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a primer for liquid crystals, polymers, rubber and elasticity. It is directed at physicists, chemists, material scientists, engineers and applied mathematicians at the graduate student level and beyond.
Download or read book Injectable Hydrogels for 3D Bioprinting written by Insup Noh and published by Royal Society of Chemistry. This book was released on 2021-07-30 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogels represent one of the cornerstones in tissue engineering and regenerative medicine, due to their biocompatibility and physiologically relevant properties. These inherent characteristics mean that they can be widely exploited as bioinks in 3D bioprinting for tissue engineering applications as well as injectable gels for cell therapy and drug delivery purposes. The research in these fields is booming and this book provides the reader with a terrific introduction to the burgeoning field of injectable hydrogel design, bioprinting and tissue engineering. Edited by three leaders in the field, users of this book will learn about different classes of hydrogels, properties and synthesis strategies to produce bioinks. A section devoted to the key processing and design challenges at the hydrogel/3D bioprinting/tissue interface is also covered. The final section of the book closes with pertinent clinical applications. Tightly edited, the reader will find this book to be a coherent resource to learn from. It will appeal to those working across biomaterials science, chemical and biomedical engineering, tissue engineering and regenerative medicine.
Download or read book Gels Structures Properties and Functions written by Masayuki Tokita and published by Springer. This book was released on 2009-10-08 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 28 contributions to the Toyoichi Tanaka Memorial Symposium on Gels which took place at Arcadia Ichigaya on September 10th-12th, 2008. The contributions from leading scientists cover a broad spectrum of topics concerning: Structure and Functional Properties of Gels - Swelling of Gels - Industrial and Biomedical Application. The symposium was held in the style of Faraday Discussions, which stimulated the active discussion. After the symposium, each manuscript was rewritten based on the discussion and the critical review. Since the research on gels is becoming more and more important both for academia and industry, this book will be an essential source of information.
Download or read book Amorphous Solid Dispersions written by Navnit Shah and published by Springer. This book was released on 2014-11-21 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a comprehensive guide on the theory and practice of amorphous solid dispersions (ASD) for handling challenges associated with poorly soluble drugs. In twenty-three inclusive chapters, the book examines thermodynamics and kinetics of the amorphous state and amorphous solid dispersions, ASD technologies, excipients for stabilizing amorphous solid dispersions such as polymers, and ASD manufacturing technologies, including spray drying, hot melt extrusion, fluid bed layering and solvent-controlled micro-precipitation technology (MBP). Each technology is illustrated by specific case studies. In addition, dedicated sections cover analytical tools and technologies for characterization of amorphous solid dispersions, the prediction of long-term stability, and the development of suitable dissolution methods and regulatory aspects. The book also highlights future technologies on the horizon, such as supercritical fluid processing, mesoporous silica, KinetiSol®, and the use of non-salt-forming organic acids and amino acids for the stabilization of amorphous systems. Amorphous Solid Dispersions: Theory and Practice is a valuable reference to pharmaceutical scientists interested in developing bioavailable and therapeutically effective formulations of poorly soluble molecules in order to advance these technologies and develop better medicines for the future.
Download or read book Biopolymer Based Formulations written by Kunal Pal and published by Elsevier. This book was released on 2020-01-18 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymer-Based Formulations: Biomedical and Food Applications presents the latest advances in the synthesis and characterization of advanced biopolymeric formulations and their state-of-the-art applications across biomedicine and food science. Sections cover the fundamentals, applications, future trends, environmental, ethical and medical considerations, and biopolymeric architectures that are organized in nano, micro and macro scales. The final section of the book focuses on novel applications and recent developments. This book is an essential resource for researchers, scientists and advanced students in biopolymer science, polymer science, polymer chemistry, polymer composites, plastics engineering, biomaterials, materials science, biomedical engineering, and more. It will also be of interest to R&D professionals, scientists and engineers across the plastics, food, biomedical and pharmaceutical industries. - Provides in-depth coverage of methods for the characterization of the physical properties of biopolymeric architectures - Supports a range of novel applications, including scaffolds, implant coatings, drug delivery, and nutraceutical encapsulation systems - Includes the use of experimental data and mathematical modeling, thus enabling the reader to analyze and compare the properties of different polymeric gels
Download or read book Introduction to Soft Matter written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2013-03-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to this exciting and relativelynew subject with chapters covering natural and synthetic polymers,colloids, surfactants and liquid crystals highlighting the many andvaried applications of these materials. Written by an expert in thefield, this book will be an essential reference for people workingin both industry and academia and will aid in understanding of thisincreasingly popular topic. Contains a new chapter on biological soft matter Newly edited and updated chapters including updated coverageof recent aspects of polymer science. Contain problems at the end of each chapter to facilitateunderstanding
Download or read book Theory and Applications of Colloidal Suspension Rheology written by Norman J. Wagner and published by Cambridge University Press. This book was released on 2021-04-15 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential text on the practical application and theory of colloidal suspension rheology, written by an international coalition of experts.
Download or read book NMR and MRI of Gels written by Yves De Deene and published by Royal Society of Chemistry. This book was released on 2020-07-07 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gels are used in a large variety of commercial and scientific products from drug delivery systems and food science to biomedical sensors. They also are invaluable in MRI physics research where they mimic biological tissue and in radiotherapy quality assurance where they are used to capture the three dimensional radiation dose distribution. This unique book discusses the state-of-the-art of NMR and MRI techniques in studying the physics and chemistry of gel systems, in their application as MRI phantoms and as three dimensional radiation dosimeters. The first part of the book will cover the fundamental physical concepts of gels and the NMR techniques to study gel systems. The second part is dedicated to the application of gels in the life sciences and in the medical practice to validate radiotherapy and new MRI techniques. Filling the gap in literature, this volume provides the scientific reader with an extensive overview of possible techniques and methods to study the interesting properties and applications of gels. For the MRI researcher and medical physicist, the book will be a valuable resource in using gel phantoms for validating contemporary MRI techniques and radiotherapy treatments.
Download or read book Food Polymers Gels and Colloids written by E. Dickinson and published by Elsevier. This book was released on 1991-01-01 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufactured foodstuffs typically exist in the form of complex, multi-phase, multi-component, colloidal systems. One way to try to make sense of their chemical and structural complexity is to study simple model systems in which the nature and properties of the polymer molecules and dispersed particles are relatively well known. This volume consists of a collection of papers delivered at a conference on food colloids, the main theme of which was the role of food macromolecules in determining the stability, structure, texture and rheology of food colloids, with particular reference to gelling behaviour and interactions between macromolecules and interfaces. A feature of the collection is the wide range of physico-chemical techniques now being used to address problems in this field.
Download or read book Soft Matter written by Roberto Piazza and published by Springer Science & Business Media. This book was released on 2011-03-29 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roberto Piazza says: “Physics should be made simple enough to be amusing, but not so trivial as to spoil the fun.” This is exactly the approach of this book in making the science of ‘soft matter’ relevant to everyday life things such as the food we eat, the plastic we use, the concrete we build with, the cells we are made of.
