Download or read book GB Z 42285 2022 Translated English of Chinese Standard GB Z 42285 2022 GBZ42285 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-06-10 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents methods for determining the ASIL (Automotive Safety Integrity Level) of electrical and electronic systems in road vehicles. Determining ASIL (Automotive Safety Integrity Level) of electrical and electronic systems is required by GB/T 34590.3-2022. This document applies to safety-related systems, which incorporate one or more electrical/electronic systems, as installed on mass-produced road vehicles other than mopeds.

Download or read book GB T 2102 2022 Translated English of Chinese Standard GB T 2102 2022 GBT2102 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-12-23 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the acceptance rules for steel tubular products as well as the technical requirements for packaging, marking and quality certificates. This document applies to acceptance rules for steel tubular products and general requirements for packaging, marking and quality certificates. When there are special provisions in product standards, follow the provisions of product standards.

Download or read book GB T 13299 2022 Translated English of Chinese Standard GB T 13299 2022 GBT13299 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-01-19 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the methods of the cutting, preparation and determination of free cementite, pearlite and Widmanstaten structure specimens in steel. This document is applicable to the determination of free cementite, pearlite and Widmanstaten structure in low-carbon and medium-carbon steel plates, steel strips and steel rods (billets). For other steel types, this document may be taken as a reference.

Download or read book GB T 16622 2022 Translated English of Chinese Standard GB T 16622 2022 GBT16622 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-12-22 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the expression for size designation of pressed-on solid tyres, as well as the size designation, dimensions, rate and load capacity for tyres. This document applies to the new pressed-on solid tyres used on counterbalanced trucks with mast and other industrial trucks.

Download or read book GB T 23922 2022 Translated English of Chinese Standard GB T 23922 2022 GBT23922 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-01-10 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the content, type, fixed position and installation requirements, performance requirements and test methods for related requirements for plates of low-speed vehicles. This document applies to the design, production and inspection of plates of low-speed vehicles.

Download or read book GB T 23832 2022 Translated English of Chinese Standard GB T 23832 2022 GBT23832 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-12-11 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the technical requirements for numbering, barcode representation, barcode symbols of global service relation numbers and service relation instance numbers. This document is applicable to the identification, automatic identification, data collection of service-related parties and service relation instances.

Download or read book GB T 16892 2022 Translated English of Chinese Standard GB T 16892 2022 GBT16892 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-01-20 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the dimensioning and tolerancing methods of non-rigid parts; and the drawing indication specifications required for the constraints when being tested and verified. This document is applicable to non-rigid parts.

Download or read book GB T 41657 2022 Translated English of Chinese Standard GB T 41657 2022 GBT41657 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-09-20 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document describes a method for determining the puncture resistance of adhesive tapes. This document applies to the determination and evaluation of the puncture resistance of adhesive tapes.

Download or read book GB T 41875 2022 Translated English of Chinese Standard GB T 41875 2022 GBT41875 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-05-04 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the classification and marking, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, accompanying documents, and order form content of seamless thin-wall molybdenum tubes. This document is applicable to seamless thin-wall molybdenum and molybdenum-alloy tubes with a wall thickness not greater than 1.5 mm produced by pressure processing. They are mainly used as nuclear cladding tubes, heat tubes, high-temperature fuel protection tubes, draft tubes, tubular electrodes, thermocouple protection tubes, and high-temperature furnace components, etc.

Download or read book GB 11614 2022 Translated English of Chinese Standard GB 11614 2022 GB11614 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-12-08 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the classification and grading, requirements, inspection methods, inspection rules, marking, packaging, transportation and storage of flat glass. This document is applicable to soda-lime-silicate flat glass with a thickness not less than 2 mm and manufactured through various processes. This document is not applicable to patterned glass and wired glass.

Download or read book GB T 1038 2 2022 Translated English of Chinese Standard GB T 1038 2 2022 GBT1038 2 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-12-21 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies two test methods for the gas transmission of plastic film and sheeting, co-extrusion material, plastic coating material and laminated board under the condition of equal pressure---coulomb sensor method and gas chromatography.

Download or read book GB T 3621 2022 Translated English of Chinese Standard GB T 3621 2022 GBT3621 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-05-02 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the classification and identification, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, as well as accompanying documents and order forms, of titanium and titanium alloy plate and sheet (hereinafter referred to as plate and sheet). This document applies to plate and sheet produced by the rolling method.

Download or read book GB T 41439 2022 Translated English of Chinese Standard GB T41439 2022 GBT 41439 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-08-21 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document describes a method for the determination of pH of salted water extracts of paper, board and pulp. This document applies to paper, board and pulps.

Download or read book GB T 13206 2022 Translated English of Chinese Standard GB T 13206 2022 GBT13206 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2024-03-04 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the requirements, test methods, inspection rules, as well as marking, packaging, transportation, storage and shelf life for glycerines (glycerol). This document applies to industrial refined glycerine produced from glycerin-containing sweet water produced by saponification, hydrolysis or transesterification of animal and vegetable oils and fats.

Download or read book GB T 5796 2 2022 Translated English of Chinese Standard GB T5796 2 2022 GBT 5796 2 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-08-21 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the diameter and pitch combination series of trapezoidal screw threads, and the profiles conform to the provisions of GB/T 5796.1. This document applies primarily to mechanical transmission screw threads, and may also be used for fastening screw threads.

Download or read book GB T 19608 2 2022 Translated English of Chinese Standard GB T 19608 2 2022 GBT19608 2 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-11-28 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the environmental parameters and severity classification of the product under the dry heat desert environment. This document applies to products stored, transported, handled and used in dry heat desert conditions. The items and levels used can be selected according to the environmental impact and degree of the product.

Download or read book GB T 41758 2 2022 Translated English of Chinese Standard GB T 41758 2 2022 GBT41758 2 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-01-14 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document describes the preparation of test specimens and test methods for the determination of properties of polyketone moulding and extrusion materials. It specifies requirements for the handling of the test material and/or the conditioning of the test material before moulding and the test specimens before testing. The determination method of properties is selected from the general test methods in GB/T 19467.1. This document also lists other test methods widely used or of special significance for moulding and extrusion materials, as well as the determination methods for characteristic properties in GB/T 41758.1. In order to ensure that the test results are reproducible and repeatable, it is necessary to use the methods for preparation of test specimens and state conditioning specified in this document, as well as the specified specimen size and test method. Test data obtained using specimens prepared under different conditions or using specimens of different dimensions may not be consistent.