Download or read book GB T 9750 1998 Translated English of Chinese Standard GBT 9750 1998 GB T9750 1998 GBT9750 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-04-30 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the main content and basic requirements of marks for package of coating products. Marks for package of coating products, which are used to represent product model, name, net weight, quality grade for package, consist of texts, letters, graphics and Arabic numerals.

Download or read book GB T 9963 1998 Translated English of Chinese Standard GBT 9963 1998 GB T9963 1998 GBT9963 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-11-30 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification, technical requirements, inspection methods, and inspection rules of tempered glass. It applies to tempered glass for construction and tempered glass for use other than construction such as industrial equipment.

Download or read book GB T 17505 1998 Translated English of Chinese Standard GBT 17505 1998 GB T17505 1998 GBT17505 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-12-04 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the general technical delivery requirements of all steel and steel products included in GB/T 15574, except cast steel and sintered metal products.

Download or read book GB T 2975 1998 Translated English of Chinese Standard GBT 2975 1998 GB T2975 1998 GBT2975 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-11-17 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements of the mechanical testing, sampling location and sample preparation of the section steel, steel bar, steel plate and steel tube defined in GB/T 15574. Through negotiation on both sides, this Standard may also adopt other metal products for sampling.

Download or read book GB T 17619 1998 Translated English of Chinese Standard GBT 17619 1998 GB T17619 1998 GBT17619 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-08-02 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies two test methods, namely, manual and automatic methods, for cloud point of petroleum products, biodiesel and biodiesel fuel blend. The manual method is deemed as the arbitration method.

Download or read book GB T 2792 1998 Translated English of Chinese Standard GBT 2792 1998 GB T2792 1998 GBT2792 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-06-02 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: standard applies to the 180 peel strength determination for the single, double-sided pressure-sensitive adhesive tape and stainless steel plate, it is also applicable to other materials, such as PVC, ABS, PE, etc.

Download or read book GB 9969 1 1998 Translated English of Chinese Standard GB 9969 1 1998 GB9969 1 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-05-18 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard stipulates the basic requirements and preparation methods of instructions for use of industrial products (hereinafter referred to as instructions for use). This standard is applicable to the preparation of instructions for use of non-consumable industrial products. Note: The preparation of instructions for use of industrial products is carried out in accordance with GB 5296.1-1997 "Instructions for use of products of consumer interest - General principles".

Download or read book GB T 17301 1998 Translated English of Chinese Standard GB T 17301 1998 GBT17301 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2024-08-08 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the permissible limits for rounding and chamfering of edges and corners in order to reduce the risk of injury to drivers or maintenance personnel when operating earth-moving machinery and performing maintenance work. This standard applies to the operation and maintenance passages and exit devices specified in GB/T 17299 and GB/T 17300 and the operating space for earth-moving machinery drivers specified in GB 8498. 2 References The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard was published, the versions shown were valid. All standards may be revised, so the parties using this standard shall explore the possibility of using the latest versions of the following standards. GB/T 17299-1998 Earth-moving machinery - Minimum access dimensions GB/T 17300-1998 Earth-moving machinery - Access systems GB 8498-87 Earth-moving machinery - Basic types - Vocabulary 3 Technical requirements If structural edges and corners of metal or non-metal materials (see Figure 1) are hard enough to bruise or pierce human skin, the structures shall comply with the requirements of 3.1~3.3. GB/T 17301-1998 www.ChineseStandard.net  Buy True-PDF  Auto-delivery Page 6 of 6 Figure 1 -- Edges and corners 3.1 The edges and corners of parts shall be rounded or chamfered, with a minimum size of 0.3 mm, as shown in Figure 2; for edges with a thickness of no more than 1 mm, protective strips shall be installed. 3.2 The external corners of the driver's cab, working doors or other sharp objects shall be rounded with a radius of not less than 4 mm. 3.3 The edges/corners of handles and handgrips shall have a radius of not less than 5 mm. Figure 2 -- Rounding and chamfering of edges/corners __________ END __________ EdgeEdgeCornerRounding Chamfering

Download or read book GB T 17600 1 1998 Translated English of Chinese Standard GBT 17600 1 1998 GB T17600 1 1998 GBT17600 1 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-14 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies a method of converting room temperature elongations after fracture obtained on various gauge lengths. It includes the conversion formula and the conversion factor table of the elongation, as well as the graphs for performing such conversions. This Standard is applicable to carbon and low alloy steels within the tensile strength range 300 to 700 MPa and in the hot-rolled, hot-rolled and normalized or annealed conditions, with or without tempering.

Download or read book GB T 9286 1998 Translated English of Chinese Standard GBT 9286 1998 GB T9286 1998 GBT9286 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-19 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The property measured by this empirical test procedure depends, among other factors, on the adhesion of the coating to either the preceding coat or the substrate. This procedure is not to be regarded, however, as a means of measuring adhesion.

Download or read book GB T 17600 2 1998 Translated English of Chinese Standard GBT 17600 2 1998 GB T17600 2 1998 GBT17600 2 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-14 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies a method of converting room temperature elongations after fracture obtained on various gauge lengths. It includes the conversion formula and the conversion factor table of the elongation, as well as the graphs for performing such conversions. This Standard is applicable to the test piece of austenitic stainless steels in solution treatment condition within the tensile strength range 450 to 750 MPa, with an original gauge length not exceed 25Sx, and a width to thickness ratio not exceed 20.

Download or read book GB T 17340 1998 Translated English of Chinese Standard GBT17340 1998 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-09-03 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the size, shape and appearance of safety glasses for road vehicles. This Standard is not only applicable to the safety glasses for road vehicles, but also applicable to the safety glasses for other road vehicles.

Download or read book GB T 1885 1998 Translated English of Chinese Standard GB T 1885 1998 GBT1885 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-12-02 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies methods for converting glass petroleum densitometer readings (observed density) obtained at non-standard temperatures into density at standard temperatures (standard density) and volume correction factor. This Standard applies to crude oil, lubricants and other liquid petroleum products. The standard temperature specified in this Standard is 20¡ãC. The thermal expansion data of the oil used in the preparation of petroleum measurement tables in this standard is consistent with ISO 91-1. NOTE: When compiling

Download or read book GB T 8979 2008 Translated English of Chinese Standard GBT 8979 2008 GB T8979 2008 GBT8979 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-11-20 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the technical requirements, test methods, as well as packaging, marking, storage, safety warning of pure nitrogen, high purity nitrogen and ultra pure nitrogen products. This Standard applies to gaseous or liquid pure nitrogen, high purity nitrogen and ultra-pure nitrogen obtained from air separation or purification. They are mainly used as the protective gas, replacement gas, reaction gas, etc. Molecular formula: N2. Relative molecular mass: 28.1034 (according to relative atomic mass in 2005).

Download or read book GB T 953 1988 Translated English of Chinese Standard GBT 953 1988 GB T953 1988 GBT953 1988 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-03-16 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies double end studs of product grade C with the thread diameter of M8 ~ M48.

Download or read book GB T 6807 2001 Translated English of Chinese Standard GBT 6807 2001 GB T6807 2001 GBT6807 2001 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-06-08 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: methods and acceptance rules of the phosphating film of iron and steel parts before painting.

Download or read book GB T 2829 2002 Translated English of Chinese Standard GBT 2829 2002 GB T2829 2002 GBT2829 2002 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-02-08 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the primary, secondary, and fifth sampling plans and sampling procedures based on the rejection quality level (expressed as the percentage of rejected products or the number of rejected products per hundred units) as the quality indicator. It is applicable to the inspection for process stability.