Download or read book GB T 9074 1 2018 Translated English of Chinese Standard GBT 9074 1 2018 GB T9074 1 2018 GBT9074 1 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-05-18 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 9074 specifies the type size, technical conditions and marks for bolt or screw and washer assemblies with plain washers. This Part applies to bolt or screw and washer assemblies with plain washers of which the thread specifications are M2~M12, there is a flat bearing surface, the performance levels of bolt or screw are levels 8.8, 9.8 and 10.9, the hardness level of plain washer is 200 HV or 300 HV.
Download or read book GB T 9074 18 2017 Translated English of Chinese Standard GBT 9074 18 2017 GB T9074 18 2017 GBT9074 18 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-11-17 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 9074 specifies type and dimension, technical conditions and marking of tapping screw and washer assemblies with plain washers. This Part is Applicable to the tapping screw and washer assemblies with plain washers for Thread Specification ST 2.2 ~ ST 9.5, flat supporting surface, and the mechanical properties conforming to GB/T 3098.5.
Download or read book GB T 9074 32 2017 Translated English of Chinese Standard GBT 9074 32 2017 GB T9074 32 2017 GBT9074 32 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-05-18 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 9074 specifies type size, technical conditions and marks of bolt or screw and washer assemblies with conical spring washers. This Part applies to bolt or screw and washer assemblies with conical spring washers of which the bolt or screw (GB/T 3098.1) thread specifications are M2.5 ~ M12, the performance levels are 8.8 and 10.9, the washer hardness is 420 HV ~ 490 HV.
Download or read book GB T 9074 31 2017 Translated English of Chinese Standard GBT 9074 31 2017 GB T9074 31 2017 GBT9074 31 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-05-18 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 9074 specifies type size, technical conditions and marks of conical spring washers for assemblies. This Part applies to conical spring washers used for bolt or screw and conical washer assemblies that comply with GB/T 9074.32. This Part applies to the washers that the specifications are 2.5mm ~ 12mm, that are used together with bolts or screws (GB/T 3098.1) of which the performance levels are 8.8 and 10.9. If used for bolts or screws that the performance level is less than 8.8, due to deformation of the contact surface, the performance of the washers shall be significantly reduced.
Download or read book GB T 879 1 2018 Translated English of Chinese Standard GBT 879 1 2018 GB T879 1 2018 GBT879 1 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-01-04 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 879 specifies type sizes, applications, technical specifications and markings for straight slotted, heavy-duty spring-type straight pins. This Part is applicable to spring-type straight pins of which the nominal diameter is d1 = 1mm~50mm, the material is steel, austenitic and martensitic stainless steel, with straight groove and withstanding heavy load.
Download or read book GB T 35840 1 2018 Translated English of Chinese Standard GBT 35840 1 2018 GB T35840 1 2018 GBT35840 1 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-05-05 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 35840 specifies the ordering content, dimensions, shape, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificate for non-alloy steels for plastic mould. This Part applies to hot-rolled or forged non-alloy round steel, square steel, flat steel and steel plates (sheets) for the manufacture of plastic mould.
Download or read book GB T 35975 2018 Translated English of Chinese Standard GBT 35975 2018 GB T35975 2018 GBT35975 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-01-13 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the common classification of load lifting attachments. This Standard is applicable to the load lifting attachments.
Download or read book GB T 35967 2018 Translated English of Chinese Standard GBT 35967 2018 GB T35967 2018 GBT35967 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-01-13 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies personnel requirements, facilities and equipment, testing procedures, testing steps and sample management procedures for label conformance testing. This Standard is applicable to label conformance testing of various products.
Download or read book GB T 18411 2018 Translated English of Chinese Standard GBT 18411 2018 GB T18411 2018 GBT18411 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-07-21 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the type, marking content, marking position and marking requirements of power-driven vehicles manufacturer plate. This standard applies to automobiles and non-complete vehicles, trailers, motorcycles and mopeds, tractors that constitute tractor transport units, wheeltype special machinery vehicles, special-type vehicles, and other vehicles can make reference to it.
Download or read book GB T 15711 2018 Translated English of Chinese Standard GBT 15711 2018 GB T15711 2018 GBT15711 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-08-22 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the selection and preparation of samples, hairline inspection method, representation and assessment of inspection results, and test report, etc. for the use of etching test method of tower samples for inspection of non-metallic inclusions of steel. This Standard is applicable to the inspection of the number, length, and distribution of hairlines in steel by etching test of tower samples of steel with a diameter, side length, or thickness of 16 mm ~ 150 mm. Other products or specifications may refer to.
Download or read book GB T 36162 2018 Translated English of Chinese Standard GBT 36162 2018 GB T36162 2018 GBT36162 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-04 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and order forms (or contracts) for copper-steel composite sheets and strips. This Standard applies to copper-steel composite sheets and strips for general industrial use.
Download or read book GB T 4249 2018 Translated English of Chinese Standard GBT 4249 2018 GB T4249 2018 GBT4249 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-06-18 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the fundamental concepts, principles and rules that are valid for the creation, interpretation and application of all relevant standards, technical specifications and technical documents to product dimensions, geometrical product specifications (GPS) and inspections. This Standard is applicable to the interpretation for GPS marks on all types of drawings. Drawing referred in this Standard is a broad concept. It includes all documents that express workpiece specifications.
Download or read book GB T 2975 2018 Translated English of Chinese Standard GBT 2975 2018 GB T2975 2018 GBT2975 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-23 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the designation, sampling location and preparation requirements of mechanical testing of section steel, steel bar, steel wire rod, steel plate and steel pipe defined in GB/T 15574. This Standard is applicable to the sampling and preparation of samples and test pieces for mechanical testing of steel and steel products. If it is indicated in the contract, this Standard is also applicable to other metal products. These test materials and samples can be tested in accordance with relevant product standards, material standards or test standards.
Download or read book GB T 36708 2018 Translated English of Chinese Standard GBT 36708 2018 GB T36708 2018 GBT36708 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-03-30 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the hardness, size, shape, technical requirements, test methods, inspection rules, package, marking and quality certificate, etc. of the prehardening high-speed tool steel bars and wires. This Standard is applicable to the pre-hardening high-speed tool steel bars and wires (hereinafter referred to as steel) with a diameter of 1.0mm~15.0mm, and polishing or cold drawing surface.
Download or read book GB T 24338 1 2018 Translated English of Chinese Standard GBT 24338 1 2018 GB T24338 1 2018 GBT24338 1 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-08-10 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 24338 specifies the structure and content of other parts of GB/T 24338. This Part specifies performance criteria which apply to the whole standard. Chapter 5 gives information on electromagnetic compatibility management. The use of this Part alone is insufficient to judge whether the basic requirements of the electromagnetic compatibility specification are met. It shall be considered in conjunction with other parts of GB/T 24338.
Download or read book GB T 18253 2018 Translated English of Chinese Standard GBT 18253 2018 GB T18253 2018 GBT18253 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-06-02 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies, when delivering the steel and steel products as per the requirements of ordering list, different types of document that shall be provided to the purchaser.
Download or read book GB T 25978 2018 Translated English of Chinese Standard GBT 25978 2018 GB T25978 2018 GBT25978 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-05 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification, performance requirements and test method for the plates and labels use don road vehicle to describe the vehicle information. This Standard is applicable to various types of plates and labels used on road vehicles to describe the vehicle manufacturing information, warning information, manipulation and indicative information. This Standard is not applicable to the directly-formed vehicle labels through marking, etching, casting, spraying, printing on the vehicle or vehicle components; or through sewing on the bodies of the components.