Download or read book GB T 35544 2017 Translated English of Chinese Standard GB T 35544 2017 GBT35544 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-11-18 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the type and parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage requirements of fully-wrapped carbon fiber reinforced cylinders with an aluminum liner for the on-board storage of compressed hydrogen as a fuel for land vehicles (hereinafter referred to as gas cylinders). This standard is applicable to the design and manufacture of refillable gas cylinders, which have a nominal working pressure not exceeding 70 MPa, a nominal water volume not exceeding 450 L, storage medium of compressed hydrogen, working temperature not lower than -40 ¡ãC and not higher than 85 ¡ãC, fixed on road vehicles as fuel tanks. Note: Gas cylinders for hydrogen supply, such as hydrogen fuel cell for urban rail transit, can be manufactured and inspected with reference to this standard.

Download or read book GB T 2440 2017 Translated English of Chinese Standard GBT 2440 2017 GB T2440 2017 GBT2440 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-11-09 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of urea. This standard applies to agricultural (fertilizer) urea and industrial urea which are produced by the synthesis of ammonia and carbon dioxide. For the sulfurcoated urea, urea for AUS32, urea for raw materials with national standards or industry standards, it shall implement the corresponding standards.

Download or read book GB T 20021 2017 Translated English of Chinese Standard GBT 20021 2017 GB T20021 2017 GBT20021 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-07-21 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the product classification, technical requirements, inspection, marks, packaging, storage and transport for heat resistant conveyor belts of duck construction used on flat or grooved roller. This Standard is application to the heat resistant conveyor belts of duck construction of which the testable temperature are not more than 100, 125, 150 and 180 Celsius.

Download or read book GB T 34475 2017 Translated English of Chinese Standard GBT 34475 2017 GB T34475 2017 GBT34475 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-06-18 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification and code, ordering contents, size, shape, weight, technical requirements, test methods, inspection rules, package, marking and quality certificate of urea grade austenitic stainless-steel bars. This Standard is applicable to the rolled or wrought urea grade austenitic stainless-steel bars with nominal size no greater than 400mm. The stainless-steel bars with nominal size greater than 400mm can be used as reference.

Download or read book GB T 2520 2017 Translated English of Chinese Standard GBT 2520 2017 GB T2520 2017 GBT2520 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-11-04 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification and codes, ordering content, dimensions, shapes, weights and tolerances, technical requirements, test methods, inspection rules, packaging, marking and quality certification of cold-reduced electrolytic tinplate.

Download or read book GB T 33824 2017 Translated English of Chinese Standard GBT 33824 2017 GB T33824 2017 GBT33824 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-10-01 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation, storage and quality certificate and order (or contract) content of aluminum and aluminum alloys plates, sheets and strips for cans and caps of new energy power batteries.

Download or read book GB T 35505 2017 Translated English of Chinese Standard GBT 35505 2017 GB T35505 2017 GBT35505 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-14 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies relevant terms, and technical requirements of quality control and assessment of sherardizing coatings anti-corrosion operation of iron and steel articles. This Standard is applicable to surface sherardizing operation of carbon steel, low-alloy steel and cast-iron components, fasteners and structural parts.

Download or read book GB T 4697 2017 Translated English of Chinese Standard GBT 4697 2017 GB T4697 2017 GBT4697 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-11-09 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the ordering content, dimensions, shape, weight and tolerances, technical requirements, test methods, inspection rules, packaging, marking and certification of hot rolled U- and I-type steel section for mine timbering. This Standard applies to hot rolled U- and I-type steel section for mine timbering.

Download or read book GB T 23541 2017 Translated English of Chinese Standard GBT 23541 2017 GB T23541 2017 GBT23541 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-23 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the shape symbol, dimensions, marking, technical requirements, test methods, inspection rules, packing, transport, and storage of grinding wheel for steel balls. This Standard applies to vitrified bonded, resinoid bonded grinding wheel for steel balls.

Download or read book GB T 536 2017 Translated English of Chinese Standard GBT 536 2017 GB T536 2017 GBT536 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-03-13 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, packaging, mark, storage, transportation and safety requirements for liquefied anhydrous ammonia. This Standard is mainly applicable to the liquefied anhydrous ammonia (liquefied ammonia for short) which is prepared by the direct catalyzed synthesis of hydrogen and nitrogen under the condition of high temperature and high pressure. The Standard is also suitable for the products which are produced by other processes.

Download or read book GB T 14464 2017 Translated English of Chinese Standard GBT 14464 2017 GB T14464 2017 GBT14464 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-09-12 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the terms and definitions, classification and marking, technical requirements, test methods, inspection rules and markings, packaging, transportation, and storage requirements of polyester staple fiber. This standard applies to semi-dull or shiny natural polyester staple fibers with a linear density of 0.8 dtex ~ 6.0 dtex and a circular cross section. Other types of polyester staple fibers may refer to this standard.

Download or read book GB T 1196 2017 Translated English of Chinese Standard GBT 1196 2017 GB T1196 2017 GBT1196 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-08-11 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules and marks, packaging, transport, storage, quality certificate and order (or contract) of unalloyed aluminium ingots for remelting.

Download or read book GB T 16552 2017 Translated English of Chinese Standard GB T 16552 2017 GBT16552 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-11-02 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the terms and definitions, naming rules, representation methods of gem. This standard applies to the naming of gem.

Download or read book GB T 24510 2017 Translated English of Chinese Standard GBT 24510 2017 GB T24510 2017 GBT24510 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-14 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the ordering contents, size, shape, weight and permissible deviation, technical requirements, test methods, inspection rules, package, mark, quality certificate and transportation of nickel alloy steel plates for low temperature pressure vessels. This Standard is applicable to the nickel alloy steel plates with thickness no greater than 150mm for the liquefied gas storage and transportation device.

Download or read book GB T 6725 2017 Translated English of Chinese Standard GBT 6725 2017 GB T6725 2017 GBT6725 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-11-17 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the order content, classification and code, size, appearance, weight and allowable deviation, technical requirements, test methods, acceptance rules, packaging, marks and quality certificate. This Standard is applicable to cold forming steel produced on continuous roll cold bending unit by cold-processed textured cold-rolled, hot-rolled or coated (plated) steel sheets and strips.

Download or read book GB T 1527 2017 Translated English of Chinese Standard GBT 1527 2017 GB T1527 2017 GBT1527 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-04-23 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, marking, packing, transportation, storing, certificate of quality, and order form (or contract) content, etc. of drawn tube of copper and copper alloys. This Standard applies to general-purpose round, rectangular (square) copper, and drawn tube of copper alloys (hereafter known as tube for short).

Download or read book GB T 34201 2017 Translated English of Chinese Standard GBT 34201 2017 GB T34201 2017 GBT34201 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-06-02 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the ordering content, dimension, shape and weight, technical requirements, inspection and test methods, inspection rules, package, marking, and quality certificate of seamless hot-rolled square and rectangular steel tubes for structure. This Standard is applicable to the seamless hot-rolled square and rectangular steel tubes for structure.