Download or read book GB T 27553 1 2011 Translated English of Chinese Standard GBT 27553 1 2011 GB T27553 1 2011 GBT27553 1 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-06-24 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 27553 specifies the structural features, technical requirements, test methods for plastics(with modified PTFE)-bronze-steel backing triple-layer self-lubricating materials. This Part of GB/T 27553 applies to plastics(with modified PTFE)- bronze-steel backing triple-layer self-lubricating materials (hereinafter referred to as the plate). The plate can be processed into a product of a rolled sleeve, a thrust washer, a slider, a guide rail, etc.
Download or read book GB T 19363 1 2008 Translated English of Chinese Standard GBT 19363 1 2008 GB T19363 1 2008 GBT19363 1 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-08-02 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 19363.1 specifies the translation services - translation services specifications. This Part is applicable to translation services.
Download or read book GB T 13306 2011 Translated English of Chinese Standard GBT 13306 2011 GB T13306 2011 GBT13306 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-04-06 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the PLATES.
Download or read book GB GB T GBT Chinese Standard English translated version Catalog002 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3870 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com
Download or read book GB T 28046 1 2011 Translated English of Chinese Standard GBT 28046 1 2011 GB T28046 1 2011 GBT28046 1 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-12-07 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location of systems/components on/in the vehicle.
Download or read book GB GBT GB T Chinese Standard English translated version Catalog001 written by Dr. Meng Yongye CODEOFCHINA and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3955 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com
Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2777 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.
Download or read book GB T 37653 2019 Translated English of Chinese Standard GBT 37653 2019 GB T37653 2019 GBT37653 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-10-12 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies product classification, technical requirements, test methods, inspection rules, marking, package, transportation, storage, quality certificate, and ordering form (or contract) contents of platinum ingots. This Standard is applicable to the platinum ingots produced by the platinum-contained raw materials.
Download or read book GB T 2015 2017 Translated English of Chinese Standard GBT 2015 2017 GB T2015 2017 GBT2015 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-19 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms, definitions, components, materials, grading, code, technical requirements, test methods, inspection rules, packaging, mark, transportation and storage of white Portland cement. This Standard is applicable to the production and application of white Portland cement.
Download or read book GB 150 1 2011 English Translation of Chinese Standard written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1.1 This standard specifies the construction requirements of metal pressure vessels (hereinafter referred to as "Vessels"). This standard specifies the general requirements for the materials, design, fabrication, inspection and testing, and acceptance of metal pressure vessels (hereinafter referred to as “Vessels”). 1.2 Applicable design pressure of this Standard 1.2.1 For steel vessels, the design pressure shall not exceed 35MPa; 1.2.2 For vessels made of other metal materials, the applicable design pressure shall be determined according to the corresponding reference standards. 1.3 Applicable design temperature range of this Standard 1.3.1 Design temperature range: -269℃~900℃. 1.3.2 For steel vessels, the design temperature shall not exceed the allowable operating temperature range of the materials listed in GB 150.2 1.3.3 For vessels made of other metal materials, the design temperature shall be determined according to the allowable operating temperature of the materials listed in the corresponding reference standards of this Part. 1.4 Applicable structure forms of this Standard 1.4.1 The structure forms of the steel vessels to which this Standard is applicable shall be in accordance with the corresponding provisions of this Part and GB 150.2 ~ GB 150.4. 1.4.2 As for the vessels with specific structures and the vessels made of aluminum, titanium, copper, nickel and nickel alloy, as well as zirconium to which this Standard is applicable, the structure forms and applicable scope shall meet the corresponding requirements of the following standards: a) GB 151 Tubular Heat Exchangers; b) GB 12337 Steel Spherical Tanks; c) JB/T 4731 Steel Horizontal Vessels on Saddle Support; d) JB/T 4710 Steel Vertical Vessels Supported by Skirt; e) JB/T 4734 Aluminim Welded Vessels; f) JB/T 4745 Titanium Welded Vessels; g) JB/T 4755 Copper Pressure Vessels; h) JB/T 4756 Nickel and Nickel Alloy Pressure Vessels; i) NB/T 47011 Zirconium Pressure Vessels. 1.5 The following vessels are not within the applicable scope of this Standard: a) Vessels with design pressure lower than 0.1MPa and vacuum degree lower than 0.02MPa; b) Vessels under "Supervision Regulation on Safety Technology for Transportable Pressure Vessel"; c) Among equipment, the pressure chambers (such as pump casing, outer casing of compressors, outer casing of turbines, hydraulic cylinders etc.) which can be its own system or as components in swiveling or reciprocating movement machinery; d) Vessels subject to the neutron radiation damage failure risk in nuclear power plants. e) Vessels heated by direct flame; f) Vessels with inner diameter (for non-circular sections, refers to the maximum geometric dimensions of the inner boundaries of the sections, such as: diagonals of rectangles and major axes of ellipses) less than 150mm; g) Enamelled vessels and the vessels with other national standards or professional standards in the refrigeration and air conditioning industry. 1.6 Vessels scope 1.6.1 Connection between the vessel and the external pipe: a) The groove end face of the first pass of girth joints with welded connection; b) The first threaded connector end surface of screwed joint; c) The sealing surface of the first flange with flanged connection; d) The first sealing surface of special connecting piece or pipe fittings connection. 1.6.2 Bearing headers, flat covers and their fasteners of connection pipe, manhole and handhole, etc. 1.6.3 Attachment welds between non-pressure components and pressure components. 1.6.4 Non-pressure components such as support and skirt directly connected to the vessels. 1.6.5 Excessive pressure relief device of vessel (see Appendix B).
Download or read book GB T 18253 2018 Translated English of Chinese Standard GBT 18253 2018 GB T18253 2018 GBT18253 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-06-02 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies, when delivering the steel and steel products as per the requirements of ordering list, different types of document that shall be provided to the purchaser.
Download or read book GB 17258 2011 English translated version written by Codeofchina.com and published by www.codeofchina.com. This book was released on 2011-12-01 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB 17258-2011 Environmental testing - Part 2: Test methods - Test J and guidance: Mold growth English-translated version
Download or read book QB T 2625 2011 Translated English of Chinese Standard QBT 2625 2011 QB T2625 2011 QBT2625 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-04-29 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of gel ink ball pens and refills.
Download or read book GB T 4622 1 2009 Translated English of Chinese Standard GBT 4622 1 2009 GB T4622 1 2009 GBT4622 1 2009 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-04-30 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 4622 specifies the types, codes, marks and symbols of spiral wound gaskets. This part is applicable to spiral wound gaskets for pipe flanges.