Download or read book GB T 12605 2008 English Translation of Chinese Standard written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Scope This standard specifies the test methods and quality evaluation classification for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes. This standard is applicable to the circumferential butt joints in metallic pipes and tubes with a wall thickness of (2~175)mm. It may also be referenced by butt-welded pipe fittings (tees and elbows) and welded joints of welded pipes and tubes (longitudinal joints and spiral joints). This standard does not apply to butt joints welded by mechanical methods such as friction welding and flash welding. 2 Normative References The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the document referred to applies. GB/T 9445 Non-destructive testing - Qualification and certification of NDT personnel (GB/T 9445-2008, ISO 9712: 2005, IDT) GB 11533-1989 Standard for logarithmic visual acuity charts GB/T 12604.2 Non-destructive testing - Terminology - Terms used in radiographic testing (GB/T 12604.2-2005, ISO 5576:1997, IDT) GB 18871-2002 Basic standards for protection against ionizing radiation and for the safety of radiation sources (neq IAEA Safety Series) GB/T 19348.1-2003 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:1998, IDT) GBZ 98-2002 Health standards for radiation workers GBZ 117-2002 Radiological protection standards for industrial X-ray detection GBZ 132-2002 Radiological protection standards for industrial gamma defect detecting JB/T 7902-2006 Non-destructive testing - Image quality indicators (wire type) for radiographic testing

Download or read book GB GB T GBT Chinese Standard English translated version Catalog002 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3870 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com

Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.

Download or read book GB T GBT Product Catalog Translated English of Chinese Standard GB T GBT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB/T; GBT.

Download or read book GB T 2008 GB 2008 Chinese National Standard PDF English Catalog year 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB, GB/T Series of year 2008.

Download or read book GB T 9969 2008 Translated English of Chinese Standard GB T9969 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-11-05 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the basic requirements and preparation methods of instructions for use of industrial products. This standard applies to the preparation methods of instructions for use of industrial products for non-consumer products. This standard can also be applied to other forms of instructions for use.

Download or read book GB T 19363 1 2008 Translated English of Chinese Standard GBT 19363 1 2008 GB T19363 1 2008 GBT19363 1 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-08-02 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 19363.1 specifies the translation services - translation services specifications. This Part is applicable to translation services.

Download or read book GB T 14647 2008 Translated English of Chinese Standard GBT 14647 2008 GB T14647 2008 GBT14647 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-11-30 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, inspection methods, inspection rules, packaging, marking, storage and transportation of CR1211, CR1212, CR1213 in CR121 series and CR1221, CR1222, CR1223 in CR122 series of the sulfurregulated chloroprene rubber.

Download or read book GB T 2101 2008 Translated English of Chinese Standard GBT 2101 2008 GB T2101 2008 GBT2101 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-05-30 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies general specifications for acceptance, packaging, marking and certification for section steel (steel bar and rod). This Standard is applicable to hot rolling, cold drawing (rolling), forging and heat treating section steel.

Download or read book GB T 22256 2008 Translated English of Chinese Standard GB T22256 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-11-05 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, requirements, test methods, inspection rules and marks, packaging, transportation, and storage for jelly candle. This Standard is applicable to jelly candle products.

Download or read book GB T 2978 2008 Translated English of Chinese Standard GBT 2978 2008 GB T2978 2008 GBT2978 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-05-25 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions of passenger car tyres, the size designation methods, and the dimensions, inflation pressures and loads corresponding to size designation etc.

Download or read book GB T 10460 2008 Translated English of Chinese Standard GB T 10460 2008 GBT10460 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-07-01 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the terms and definitions, classification, quality requirements and hygienic requirements, inspection methods, inspection rules, labeling, packaging, storage, and transportation requirements of peas. This standard applies to purchasing, storage, transportation, processing, and sale of commercial peas.

Download or read book GB GB T GBT Chinese Standard English translated version Catalog003 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3290 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com

Download or read book GB T 10609 1 2008 Translated English of Chinese Standard GBT 10609 1 2008 GB T10609 1 2008 GBT10609 1 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-11-02 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 10609 specifies the basic requirements, content, size, format of the title blocks in the technical drawings. This part applies to the title blocks in the technical drawings.

Download or read book GB T 9978 3 2008 English translated version written by Codeofchina and published by https://www.codeofchina.com. This book was released on 2009-03-01 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB/T 9978.3-2008 Ductile iron pipes,fittings and accessories for water or gas applications English-translated version

Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).

Download or read book GB T 16799 2008 Translated English of Chinese Standard GBT 16799 2008 GB T16799 2008 GBT16799 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-07-21 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the product classification, requirements, grading, test methods, inspection rules and markings, packaging, transportation and storage of furniture leather. This standard applies to all kinds of furniture leather.