Download or read book GB T 10357 3 2013 Translated English of Chinese Standard GB T 10357 3 2013 GBT10357 3 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-04-27 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 10357 specifies test methods for determining the strength and durability of various chairs and stools. This Part is applicable to various chairs and stools used in household, hotel and restaurant. This Part is not applicable to revolving chair, Children's chair as well as chairs and stools made of ceramic, vine and osier. 2 General Test Conditions 2.1 Specimen If the specimen is made by gluing timber or similar materials, after manufacture, it shall be stored continuously in general indoor environment for at least 7d before the test. Specimen shall be finished product. If the specimen is knock-down, the product shall be assembled in accordance with assembly instruction; if the specimen may be assembled or combined according to different modes, during the test, it shall be assembled or combined according to the most adverse combination for the strength test and durability test. Before the test, the connection piece of knock-down product shall be fastened; the assembling components shall be firmly installed and cannot be reinforced additionally without special requirements of manufacturer. 2.2 Loading requirements The forces in strength tests shall be applied sufficiently slowly to ensure that negligible dynamic load is applied. The forces in durability tests shall be applied sufficiently slowly to ensure that kinetic heating does not occur. Unless otherwise specified, the load shall be maintained for (10¡À2)s in strength test and shall be maintained for (2¡À1)s in durability test. 2.3 Load The test is divided into five levels according to the normal use frequency and potential misusage degree of product under intended application conditions and based on the GB/T 10357.3-2013 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery. Page 6 of 28 magnitude and times of loading; the determination of test level is detailed in Appendix A. 2.4 Test conditions In addition to the specified test equipment, any suitable equipment is applicable to this part. Duri...

Download or read book GB T 10357 7 2013 Translated English of Chinese Standard GBT 10357 7 2013 GB T10357 7 2013 GBT10357 7 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-06-27 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 10357 specifies the test method of loading stability of tables. This Part applies to the tables which have no fixed connection with ground, buildings, and furniture etc.

Download or read book GB T 10357 1 2013 Translated English of Chinese Standard GBT 10357 1 2013 GB T10357 1 2013 GBT10357 1 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-05-16 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 10357 stipulates the test method of strength and durability of tables. This Part is applicable to various table furniture used in households, hotels and restaurants, etc.

Download or read book GB T 10357 4 2013 Translated English of Chinese Standard GBT 10357 4 2013 GB T10357 4 2013 GBT10357 4 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-09-02 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 10357 specifies the test method for stability of storage units. This Part is applicable to exit-factory products of all kinds of one-piece storage unit furniture.

Download or read book GB T 10357 6 2013 Translated English of Chinese Standard GBT 10357 6 2013 GB T10357 6 2013 GBT10357 6 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-19 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 10357 specifies test methods for the strength and durability of beds. This part is applicable to various hard-surface beds used in households and hotels. Beds of other types may also be implemented by reference to this part according to their use functions.

Download or read book GB T 10357 2 2013 Translated English of Chinese Standard GBT 10357 2 2013 GB T10357 2 2013 GBT10357 2 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-06-27 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 10357 specifies two stability test methods for straight-backed chairs and stools: Test method and calculation method. The loading-force method and loading-force position specified by these two test methods are the same, and the obtained test results are equivalent. This Part applies to various straight-back chairs, stool-type furniture, deck chairs and backrest-tiltable seat-chairs which are adjustable to be straight-back state, and they are used in households, hotels, restaurants and other occasions. This Part does not apply to multi-seat chairs, multi-purpose chairs, deck chairs and backrest-tiltable seat-chairs which are adjustable to be lying state.

Download or read book GB T 10357 4 2023 Translated English of Chinese Standard GB T 10357 4 2023 GBT10357 4 2023 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2024-08-03 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document describes the test methods for the strength and durability of storage units. This document is applicable to storage functional furniture that has been intactly assembled and ready for use, including its movable and immovable components.

Download or read book Furniture Assessment of Surface Resistance to Wet Heat written by British Standards Institute Staff and published by . This book was released on 1997-12-15 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furniture, Surface treatment, Finishes, Damp-heat tests, Thermal testing, Thermal resistance, Testing conditions, Test equipment, Specimen preparation, Visual inspection (testing), Grades (quality), Ratings, Trading standards, TSS