Download or read book GB 50011 2010 Translated English of Chinese Standard GB50011 2010 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-07-09 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This code is formulated with a view to implementing the relevant laws and regulations with a view to implementing the relevant laws and regulations on construction engineering and protecting against and mitigating earthquake disasters, carrying out the policy of prevention first, as well alleviating the seismic damage of buildings, avoiding casualties and reducing economic loss through buildings, avoiding casualties and reducing economic loss through seismic precautionary of buildings.
Download or read book Engineering Geology for a Habitable Earth IAEG XIV Congress 2023 Proceedings Chengdu China written by Sijing Wang and published by Springer Nature. This book was released on with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damping Technologies for Tall Buildings written by Alberto Lago and published by Butterworth-Heinemann. This book was released on 2018-09-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damping Technologies for Tall Buildings provides practical advice on the selection, design, installation and testing of damping systems. Richly illustrated with images and schematics, this book presents expert commentary on different damping systems, giving readers a way to accurately compare between different device categories and gain and understand the advantages and disadvantages of each. In addition, the book covers their economical and sustainability implications. Case studies are included to provide a direct understanding on the possible applications of each device category.
Download or read book High rise Building Structures written by Wolfgang Schueller and published by John Wiley & Sons. This book was released on 1977 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Analysis of Tall and Complex Structures written by Feng Fu and published by Butterworth-Heinemann. This book was released on 2018-02-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of tall buildings and complex structures involves challenging activities, including: scheme design, modelling, structural analysis and detailed design. This book provides structural designers with a systematic approach to anticipate and solve issues for tall buildings and complex structures. This book begins with a clear and rigorous exposition of theories behind designing tall buildings. After this is an explanation of basic issues encountered in the design process. This is followed by chapters concerning the design and analysis of tall building with different lateral stability systems, such as MRF, shear wall, core, outrigger, bracing, tube system, diagrid system and mega frame. The final three chapters explain the design principles and analysis methods for complex and special structures. With this book, researchers and designers will find a valuable reference on topics such as tall building systems, structure with complex geometry, Tensegrity structures, membrane structures and offshore structures. - Numerous worked-through examples of existing prestigious projects around the world (such as Jeddah Tower, Shanghai Tower, and Petronas Tower etc.) are provided to assist the reader's understanding of the topic - Provides the latest modelling methods in design such as BIM and Parametric Modelling technique - Detailed explanations of widely used programs in current design practice, such as SAP2000, ETABS, ANSYS, and Rhino - Modelling case studies for all types of tall buildings and complex structures, such as: Buttressed Core system, diagrid system, Tube system, Tensile structures and offshore structures etc.
Download or read book Highway Bridges and Culverts written by B. K. Coghlan and published by . This book was released on 1915 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Use of Concrete written by British Standards Institution and published by . This book was released on 1997 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Construction materials, Buildings, Structures, Structural design, Loading, Reinforced concrete, Strength of materials, Framed structures, Beams, Slabs, Structural members, Shear stress, Columns, Walls, Stability, Stairs, Foundations, Reinforcement, Prestressed concrete, Precast concrete, Composite construction, Composition, Durability, Concrete mixes, Curing (concrete), Formwork, Finishes, Movement joints, Grouting
Download or read book Corrosion of Steel in Concrete Structures written by Amir Poursaee and published by Woodhead Publishing. This book was released on 2023-02-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading for researchers, practitioners, and engineers, this book covers not only all the important aspects in the field of corrosion of steel reinforced concrete but also discusses new topics and future trends. Theoretical concepts of corrosion of steel in concrete structures, the variety of reinforcing materials and concrete, including stainless steel and galvanized steel, measurements and evaluations, such as electrochemical techniques and acoustic emission, protection and maintenance methods, and modelling, latest developments, and future trends in the field are discussed. - Comprehensive coverage of the corrosion of steel bars in concrete, investigating the range of reinforcing materials, and types of concrete - Introduces the latest measuring methods, data collection, and advanced modeling techniques - Second edition covers a range of new, emerging topics such as the concept of chloride threshold value, concrete permeability and chloride diffusion, the role of steel microstructure, and innovations in corrosion detection devices
Download or read book AASHTO LRFD Bridge Design Specifications Customary U S units written by and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aesthetics and Technology in Building written by Pier Luigi Nervi and published by Cambridge, Mass. : Harvard University Press. This book was released on 1965 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a verbal and pictorial illustration of the credo that has guided one of the world's most distinguished architects throughout his career. "Architecture is, and must be, a synthesis of technology and art." Using nearly 200 drawings and photographs, including plans, interesting details, various stages of construction, and both interior and exterior views of some of his major works, Mr. Nervi shows how his philosophy is put into practice. Referring to most of his important projects, he discusses solutions to various functional and construction requirements where he used precast and cast-in-place concrete, emphasizing the richness of this material. Mr. Nervi stresses the advantages of reinforced concrete, which, he says, allows greater flexibility and makes it easier to satisfy his triple demand of economy, technical correctness, and aesthetic satisfaction. In predicting the future of architecture he stresses the necessity of architectural solutions that are functionally and technically sound. His final remarks concern his ideas about the proper course of study for architecture students, training that will produce architects with a "far greater technical sense than in the past, a technical sense which results in a constant search for economic efficiency."
Download or read book Earthquake Resistant Structures Design Assessment and Rehabilitation written by Marek Lagunov and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake-resistant structures are the structures considered to withstand earthquakes. While no structure can be entirely resistant to damage from earthquakes, the goal of earthquake-resistant building is to create structures that fare better during seismic activity than their predictable counterparts. Earthquake-resistant structures are envisioned to resist the largest earthquake of a certain probability that is likely to occur at their location. This means the loss of life should be minimized by preventing collapse of the buildings for rare earthquakes while the loss of functionality should be limited for more frequent ones. To be earthquake proof, buildings, structures and their foundations need to be built to be resistant to sideways loads. The lighter the building is, the less the loads. This is particularly so when the weight is higher up. They must be strong enough to take the loads. They must be tied in to any framing, and reinforced to take load in their weakest direction. They must not fall apart and must remain in place after the worst shock waves so as to retain strength for the aftershocks. Currently, there are several design philosophies in earthquake engineering, making use of experimental results, computer simulations and observations from past earthquakes to offer the required performance for the seismic threat at the site of interest. These range from appropriately sizing the structure to be strong and ductile enough to survive the shaking with an acceptable damage, to equipping it with base isolation or using structural vibration control technologies to minimize any forces and deformations. This book highlights on seismic-resistance design of masonry and reinforced concrete structures to be constructed in addition to safety assessment, strengthening and rehabilitation of existing structures in contrast to earthquake loads. This book focuses on earthquake-resistant structures, such as, buildings, bridges and liquid storage tanks. It covers topics in the field of earthquake engineering. The book provides the contemporary topics on recent progress in earthquake-resistant structures and a helpful tool for graduate students, researchers and practicing structural engineers.
Download or read book Seismic Design for Nuclear Power Plants written by Robert J. Hansen and published by MIT Press (MA). This book was released on 1970 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of protective measures to guard against the spread of radioactive debris following reactor disasters has been given extensive and careful engineering attention over the past several years. Much of this attention has been devoted to eliminating or minimizing the effects of malfunctions of internal components. But reactors can also suffer externally caused disasters—for example, their radioactive cores can be damaged by earthquakes or by missiles generated by tornadoes. Earthquakes in particular will continue to render man vulnerable even to the "peaceful atom" as the number of nuclear power plants increases and as they come to be located in those parts of the world that have a history of seismic activity. It was to consider such problems that the seminar reported here was held. The conferees, who are leaders in this special and important field, gathered in Cambridge, Massachusetts, in spring 1969, to present the papers whose titles are listed below. Together they cover both the theoretical underpinnings of the subject and specific applications to nuclear reactors; they provide both useful summaries of what is known to date and some new thinking on the subject, not before published. Contents: Preface—T. J. Thompson. Foreword—R. J. Hansen. Introduction—R. V. Whitman. Geological and Seismological Factors Influencing the Assessment of a Seismic Threat to Nuclear Reactors—Daniel Linehan, S. J. Geophysics—Keiiti Aki. Design Seismic Inputs—C. Allin Cornell. Some Observations on Probabilistic Methods in the Seismic Design of Nuclear Power Plants—C. Allin Cornell. Seismic Risk and Seismic Design Decisions—Luis Esteva. Fundamentals of Soil Amplification—J. M. Roesset. Soil Structure Interaction—R. V. Whitman. Evaluation of Soil Properties for Site Evaluation and Dynamic Analysis of Nuclear Plants—R. V. Whitman. Structural Response to Seismic Input—J. M. Biggs. Seismic Analysis of Equipment Mounted on a Massive Structure—J. M. Biggs and J. M. Roesset. Modal Response of Containment Structures—Peter Jan Pahl. Provision of Required Seismic Resistance—M. J. Holley, Jr. A Measure of Earthquake Intensity—Arturo Arias. Closure—R. J. Hansen.
Download or read book Innovations in Fuel Economy and Sustainable Road Transport written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2011-10-19 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the Innovations in Fuel Economy and Sustainable Road Transport conference, held in Pune, India, 8-9 November, 2011. Papers examine advances in powertrain, alternative fuels, lightweight vehicles, electric vehicles and hybrid vehicles. An international assembly of senior industry representatives provide insight into research and technological advances in low carbon technology sustainability for road transport, helping towards achieving stringent emissions standards and continual improvements in fuel economy efficiency, all in an expanding Indian market. These technical papers from industry and academia discuss the developments and research of leading organisations. - Discusses maximising powertrain performance for a low carbon agenda - Provides readers with an understanding of the latest developments in alternative fuels - Examines the future landscape for the implementation and development of electric vehicles
Download or read book Materials and Joints in Timber Structures written by Simon Aicher and published by Springer Science & Business Media. This book was released on 2013-09-25 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam
Download or read book Guidelines for Environmental Risk Assessment and Management written by and published by . This book was released on 2000-01-01 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the Department of the Environment published "A guide to risk assessment and risk management for environmental protection" in 1995, it was one of the first attempts to explore some of the underlying principles of environmental risk assessment. Publication of this revised guidance emphasises the establishment of risk assessment and risk management, together with risk communication, as essential elements of structured decision making processes across government.
Download or read book Changing Ideals in Modern Architecture 1750 1950 written by Peter Collins and published by . This book was released on 1967 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practice of Earthquake Hazard Assessment written by DIANE Publishing Company and published by DIANE Publishing. This book was released on 1993 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes probabilistic seismic hazard assessment as it is practiced in various countries throughout the world. 59 reports are included covering 88 countries, which comprise about 80% of the inhabited land mass of the Earth. Over 100 maps.
