Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems

Download or read book Gas Turbine Engineering Handbook written by Sanjay Patil and published by Scitus Academics LLC. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbine engineering handbook focuses on the design, fabrication, installation, operation, and maintenance of gas turbines. The third edition is not only an updating of the technology in gas turbines, which has seen a great leap forward in the 2000s, but also a rewriting of various sections to better answer today's problems in the design, fabrication, installation, operation, and maintenance of gas turbines. The third edition has added a new chapter that examines the case histories of gas turbines from deterioration of the performance of gas turbines to failures encountered in all the major components of the gas turbine.

Download or read book The Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Full text engineering e-book.

Download or read book Gas Turbine Combustion written by Arthur H. Lefebvre and published by CRC Press. This book was released on 2010-04-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the developments in gas turbine combustion technology that have occurred in the last decade, Gas Turbine Combustion: Alternative Fuels and Emissions, Third Edition provides an up-to-date design manual and research reference on the design, manufacture, and operation of gas turbine combustors in applications ranging from aeronautical to po

Download or read book Gas Turbines written by Claire Soares and published by Elsevier. This book was released on 2014-10-23 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering basic theory, components, installation, maintenance, manufacturing, regulation and industry developments, Gas Turbines: A Handbook of Air, Sea and Land Applications is a broad-based introductory reference designed to give you the knowledge needed to succeed in the gas turbine industry, land, sea and air applications.Providing the big picture view that other detailed, data-focused resources lack, this book has a strong focus on the information needed to effectively decision-make and plan gas turbine system use for particular applications, taking into consideration not only operational requirements but long-term life-cycle costs in upkeep, repair and future use.With concise, easily digestible overviews of all important theoretical bases and a practical focus throughout, Gas Turbines is an ideal handbook for those new to the field or in the early stages of their career, as well as more experienced engineers looking for a reliable, one-stop reference that covers the breadth of the field. Covers installation, maintenance, manufacturer's specifications, performance criteria and future trends, offering a rounded view of the area that takes in technical detail as well as well as industry economics and outlook Updated with the latest industry developments, including new emission and efficiency regulations and their impact on gas turbine technology Over 300 pages of new/revised content, including new sections on microturbines, non-conventional fuel sources for microturbines, emissions, major developments in aircraft engines, use of coal gas and superheated steam, and new case histories throughout highlighting component improvements in all systems and sub-systems

Download or read book The Gas Turbine Handbook written by Tony Giampaolo and published by The Fairmont Press, Inc.. This book was released on 2003 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this comprehensive reference provides the fundamental information required to understand both the operation and proper application of all types of gas turbines. The completely updated second edition adds a new section on use of inlet cooling for power augmentation and NOx control. It explores the full spectrum of gas turbines hardware, typical application scenarios, and operating parameters, controls, inlet treatments, inspection, trouble-shooting, and more. The author discusses strategies that can help readers avoid problems before they occur and provides tips that enable diagnosis of problems in their early stages and analysis of failures to prevent their recurrence.

Download or read book Gas Turbine Handbook Third Edition written by Tony Giampaolo and published by Fairmont Press. This book was released on 2006-03-30 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, best-selling reference provides the fundamental information you'll need to understand both the operation and proper application of all types of gas turbines. The full spectrum of hardware, as well as typical application scenarios are fully explored, along with operating parameters, controls, inlet and exhaust treatments, inspection, troubleshooting, noise control, inlet cooling for power augmentation and NOx control. This latest edition includes a new chapter on microturbines and additional case studies. The author has provided many helpful tips that will enable diagnosis of problems in their early stages and analysis of failures to prevent their recurrence. Also treated are the effects of the external environment on gas turbines operation and life, as well as the impact of the gas turbine on its surrounding environment.

Download or read book Sawyer gas turbine engineering handbook written by and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sawyer s Gas Turbine Engineering Handbook Application written by John Wesley Sawyer and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sawyer s Gas Turbine Engineering Handbook written by John Wesley Sawyer and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sawyer s Gas Turbine Engineering Handbook written by and published by . This book was released on 1972 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sawyer s Gas Turbine Engineering Handbook Application written by John William Sawyer and published by . This book was released on 1972 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aircraft Engine Design written by Jack D. Mattingly and published by AIAA. This book was released on 2002 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A design textbook attempting to bridge the gap between traditional academic textbooks, which emphasize individual concepts and principles; and design handbooks, which provide collections of known solutions. The airbreathing gas turbine engine is the example used to teach principles and methods. The first edition appeared in 1987. The disk contains supplemental material. Annotation c. Book News, Inc., Portland, OR (booknews.com).

Download or read book The Design of High Efficiency Turbomachinery and Gas Turbines second edition with a new preface written by David Gordon Wilson and published by MIT Press. This book was released on 2014-09-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive textbook that introduces turbomachinery and gas turbines through design methods and examples. This comprehensive textbook is unique in its design-focused approach to turbomachinery and gas turbines. It offers students and practicing engineers methods for configuring these machines to perform with the highest possible efficiency. Examples and problems are based on the actual design of turbomachinery and turbines. After an introductory chapter that outlines the goals of the book and provides definitions of terms and parts, the book offers a brief review of the basic principles of thermodynamics and efficiency definitions. The rest of the book is devoted to the analysis and design of real turbomachinery configurations and gas turbines, based on a consistent application of thermodynamic theory and a more empirical treatment of fluid dynamics that relies on the extensive use of design charts. Topics include turbine power cycles, diffusion and diffusers, the analysis and design of three-dimensional free-stream flow, and combustion systems and combustion calculations. The second edition updates every chapter, adding material on subjects that include flow correlations, energy transfer in turbomachines, and three-dimensional design. A solutions manual is available for instructors. This new MIT Press edition makes a popular text available again, with corrections and some updates, to a wide audience of students, professors, and professionals.

Download or read book Combined cycle Gas Steam Turbine Power Plants written by Rolf Kehlhofer and published by PennWell Books. This book was released on 1999 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides a reference on technical and economic factors of combined-cycle applications within the utility and cogeneration markets. Kehlhofer - and hos co-authors give the reader tips on system layout, details on controls and automation, and operating instructions.

Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer. This book was released on 2017-06-06 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.

Download or read book Gas Turbines written by Claire Soares and published by Elsevier. This book was released on 2011-04-01 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major reference book offers the professional engineer - and technician - a wealth of useful guidance on nearly every aspect of gas turbine design, installation, operation, maintenance and repair. The author is a noted industry expert, with experience in both civilian and military gas turbines, including close work as a technical consultant for GE and Rolls Royce. • Guidance on installation, control, instrumentation/calibration, and maintenance, including lubrication, air seals, bearings, and filters• Unique compendium of manufacturer’s specifications and performance criteria, including GE, and Rolls-Royce engines• Hard-to-find help on the economics and business-management aspect of turbine selection, life-cycle costs, and the future trends of gas turbine development and applications in aero, marine, power generation and beyond