Download or read book Gas Injection Methods written by Zhaomin Li and published by Gulf Professional Publishing. This book was released on 2022-09-24 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Enhanced Oil Recovery Series delivers a multivolume approach that addresses the latest research on various types of EOR. The second volume in the series, Gas Injection Methods, helps engineers focus on the latest developments in one of the fastest growing areas. Different techniques are described in addition to the latest technology such as data mining and unconventional reservoirs. Supported field case studies are included to show a bridge between research and practical application, making it useful for both academics and practicing engineers. Structured to start with an introduction on various gas types and different gas injection methods, screening criteria for choosing gas injection method, and environmental issues during gas injection methods, the editors then advance on to more complex content, guiding the engineer into newer topics involving CO2 such as injection in tight oil reservoirs, shale oil reservoirs, carbonated water, data mining, and formation damage. Supported by a full spectrum of contributors, this book gives petroleum engineers and researchers the latest research developments and field applications to drive innovation for the future. - Helps readers understand the latest research and practical applications specific to foam flooding and gas injection - Provides readers with the latest technology, including nanoparticle-stabilized foam for mobility control and carbon storage in shale oil reservoirs - Teaches users about additional methods such as data mining applications and economic and environmental considerations
Download or read book Fundamentals and Practical Aspects of Gas Injection written by Reza Azin and published by Springer Nature. This book was released on 2021-07-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers different aspects of gas injection, from the classic pressure maintenance operation to enhanced oil recovery (EOR), underground gas storage (UGS), and carbon capture and storage (CCS). The authors detail the unique characteristics and specific criteria of each application, including: material balance equations phase behaviour reservoir engineering well design operating aspects surface facilities environmental issues Examples, data, and simulation codes are provided to enable the reader to gain an in-depth understanding of these applications. Fundamentals and Practical Aspects of Gas Injection will be of use to practising engineers in the fields of reservoir engineering, and enhanced oil recovery. It will also be of interest to researchers, academics, and graduate students working in the field of petroleum engineering.
Download or read book Fundamentals of Enhanced Oil and Gas Recovery from Conventional and Unconventional Reservoirs written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2018-08-18 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Enhanced Oil and Gas Recovery from Conventional and Unconventional Reservoirs delivers the proper foundation on all types of currently utilized and upcoming enhanced oil recovery, including methods used in emerging unconventional reservoirs. Going beyond traditional secondary methods, this reference includes advanced water-based EOR methods which are becoming more popular due to CO2 injection methods used in EOR and methods specific to target shale oil and gas activity. Rounding out with a chapter devoted to optimizing the application and economy of EOR methods, the book brings reservoir and petroleum engineers up-to-speed on the latest studies to apply. Enhanced oil recovery continues to grow in technology, and with ongoing unconventional reservoir activity underway, enhanced oil recovery methods of many kinds will continue to gain in studies and scientific advancements. Reservoir engineers currently have multiple outlets to gain knowledge and are in need of one product go-to reference. - Explains enhanced oil recovery methods, focusing specifically on those used for unconventional reservoirs - Includes real-world case studies and examples to further illustrate points - Creates a practical and theoretical foundation with multiple contributors from various backgrounds - Includes a full range of the latest and future methods for enhanced oil recovery, including chemical, waterflooding, CO2 injection and thermal
Download or read book Applied Drilling Circulation Systems written by Boyun Guo and published by Gulf Professional Publishing. This book was released on 2011-04-21 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used to clean the borehole, stabilize rock, control pressures, or enhance drilling rates, drilling fluids and their circulation systems are used in all phases of a drilling operation. These systems are highly dynamic and complicated to model until now. Written by an author with over 25 years of experience, Applied Drilling Circulation Systems: Hydraulics, Calculations and Models provide users with the necessary analytical/numerical models to handle problems associated with the design and optimization of cost-effective drilling circulation systems. The only book which combines system modeling, design, and equipment, Applied Drilling Circulation Systems: Hydraulics, Calculations and Models provides a clear and rigorous exposition of traditional and non-traditional circulation systems and equipment followed by self contained chapters concerning system modelling applications. Theories are illustrated by case studies based on the author's real life experience. The book is accompanied by a website which permits readers to construct, validate, and run models employing Newtonian fluids, Bingham Plastic fluids, Power Law fluids, and aerated fluids principles. This combination book and website arrangement will prove particularly useful to drilling and production engineers who need to plan operations including pipe-tripping, running-in casing, and cementing. - In-depth coverage of both on- and offshore drilling hydraulics. - Methods for optimizing both on- and offshore drilling hydraulics. - Contains problems and solutions based on years of experience.
Download or read book Fundamentals of Enhanced Oil Recovery Methods for Unconventional Oil Reservoirs written by Dheiaa Alfarge and published by Elsevier. This book was released on 2020-09-09 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Enhanced Oil Recovery Methods for Unconventional Oil Reservoirs, Volume 67 provides important guidance on which EOR methods work in shale and tight oil reservoirs. This book helps readers learn the main fluid and rock properties of shale and tight reservoirs—which are the main target for EOR techniques—and understand the physical and chemical mechanisms for the injected EOR fluids to enhance oil recovery in shale and tight oil reservoirs. The book explains the effects of complex hydraulic fractures and natural fractures on the performance of each EOR technique. The book describes the parameters affecting obtained oil recovery by injecting different EOR methods in both the microscopic and macroscopic levels of ULR. This book also provides proxy models to associate the functionality of the improved oil recovery by injecting different EOR methods with different operating parameters, rock, and fluid properties. The book provides profesasionals working in the petroleum industry the know-how to conduct a successful project for different EOR methods in shale plays, while it also helps academics and students in understanding the basics and principles that make the performance of EOR methods so different in conventional reservoirs and unconventional formations. - Provides a general workflow for how to conduct a successful project for different EOR methods in these shale plays - Provides general guidelines for how to select the best EOR method according to the reservoir characteristics and wells stimulation criteria - Explains the basics and principles that make the performance of EOR methods so different in conventional reservoirs versus unconventional formations
Download or read book Primer on Enhanced Oil Recovery written by Vladimir Vishnyakov and published by Gulf Professional Publishing. This book was released on 2019-11-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primer on Enhanced Oil Recovery gives the oil and gas market the introductory information it needs to cover the physical and chemical properties of hydrocarbon reservoir fluids and rock, drilling operations, rock-fluid interactions, recovery methods, and the economy of enhanced oil recovery projects. Beginning with introductory materials on basic physics and oil-rock interaction, the book then progresses into well-known types of EOR, such as gas injection and microbial EOR. Other sections cover hybrid EOR, smart water/low salinity and solar EOR. Worldwide case study examples give engineers the go-to starting point they need to understand the fundamentals of EOR techniques and data.
Download or read book Enhanced Oil Recovery in Shale and Tight Reservoirs written by James J.Sheng and published by Gulf Professional Publishing. This book was released on 2019-11-07 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil Recovery in Shale and Tight Reservoirs delivers a current, state-of-the-art resource for engineers trying to manage unconventional hydrocarbon resources. Going beyond the traditional EOR methods, this book helps readers solve key challenges on the proper methods, technologies and options available. Engineers and researchers will find a systematic list of methods and applications, including gas and water injection, methods to improve liquid recovery, as well as spontaneous and forced imbibition. Rounding out with additional methods, such as air foam drive and energized fluids, this book gives engineers the knowledge they need to tackle the most complex oil and gas assets. - Helps readers understand the methods and mechanisms for enhanced oil recovery technology, specifically for shale and tight oil reservoirs - Includes available EOR methods, along with recent practical case studies that cover topics like fracturing fluid flow back - Teaches additional methods, such as soaking after fracturing, thermal recovery and microbial EOR
Download or read book Polymer Improved Oil Recovery written by K.S. Sorbie and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of oil in the world economy cannot be overstated, and methods for recovering oil will be the subject of much scientific and engineering research for many years to come. Even after the application of primary depletion and secondary recovery processes (usually waterflooding), much oil usually remains in a reservoir, and indeed in some heterogeneous reservoir systems as much as 70% of the original oil may remain. Thus, there is an enormous incentive for the development of improved or enhanced methods of oil recovery, aimed at recovering some portion of this remainil)g oil. The techniques used range from 'improved' secondary flooding methods (including polymer and certain gas injection processes) through to 'enhanced' or 'tertiary' methods such as chemical (surfactant, caustic, foam), gas miscible (carbon dioxide, gas reinjection) and thermal (steam soak and drive, in-situ combustion). The distinction between the classification ofthe methods usually refers to the target oil that the process seeks to recover. That is, in 'improved' recovery we are usually aiming to increase the oil sweep efficiency, whereas in 'tertiary' recovery we aim to mobilise and recover residual or capillary trapped oil. There are a few books and collections of articles which give general overviews of improved and enhanced oil recovery methods. However, for each recovery method, there is such a wide range of interconnected issues concerning the chemistry, physics and fluid mechanics of flow in porous media, that rarely are these adequately reviewed.
Download or read book Heavy Crude Oil Recovery written by E. Okandan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last 10 years the world has come to a point where the easily explorable oil deposits have now been found, and it is anticipated that such deposits will be depleted by the beginning of the Twenty-first Century. However, the increasing demand of man kind for energy has caused technologists to look into ways of find ing new sources or to reevaluat:e unconventional sources which, in the past, have not been economical. In this respect, heavy crude and tar sand oils are becoming important in fulfilling the world's energy requirements. What are heavy crude and tar sand oils? There is still some confusion as to their definitions, inasmuch as they vary among organizations and countries. In an effort to set agreed meanings, UNITAR, in a meeting in February 1982 in Venezuela, proposed the following definitions (see also Table 1): 1. Heavy crude oil and tar sand oil are petroleum or petroleum like liquids or semi-solids naturally occurring in porous media. The porous media are sands, sandstone, and carbonate rocks. 2. These oils will be characterized by viscosity and density. Viscosity will be used to define heavy crude oil and tar sand oil, and density (oAPI) will be used when viscosity measurements are not available. 3. Heavy crude oil has a gas-free viscosity of 100-10000 mPa.s (cp) 3 o at reservoir temperatures, or a density of 943 kg/m (20 API) 3 o o to 1000 kg/m (10 API) at 15.6 C and at atmospheric oressure.
Download or read book Waterflooding written by G. Paul Willhite and published by . This book was released on 1986 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waterflooding begins with understanding the basic principles of immiscible displacement, then presents a systematic procedure for designing a waterflood.
Download or read book Equations of State and PVT Analysis written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2016-03-02 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of a reservoir's fluids and creating a successful model based on lab data and calculation are required for every reservoir engineer in oil and gas today, and with reservoirs becoming more complex, engineers and managers are back to reinforcing the fundamentals. PVT (pressure-volume-temperature) reports are one way to achieve better parameters, and Equations of State and PVT Analysis, Second Edition, helps engineers to fine tune their reservoir problem-solving skills and achieve better modeling and maximum asset development. Designed for training sessions for new and existing engineers, Equations of State and PVT Analysis, Second Edition, will prepare reservoir engineers for complex hydrocarbon and natural gas systems with more sophisticated EOS models, correlations and examples from the hottest locations around the world such as the Gulf of Mexico, North Sea and China, and Q&A at the end of each chapter. Resources are maximized with this must-have reference. - Improve with new material on practical applications, lab analysis, and real-world sampling from wells to gain better understanding of PVT properties for crude and natural gas - Sharpen your reservoir models with added content on how to tune EOS parameters accurately - Solve more unconventional problems with field examples on phase behavior characteristics of shale and heavy oil
Download or read book Chemical Methods written by Abdolhossein Hemmati-Sarapardeh and published by Gulf Professional Publishing. This book was released on 2021-11-30 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Methods, a new release in the Enhanced Oil Recovery series, helps engineers focus on the latest developments in one fast-growing area. Different techniques are described in addition to the latest technologies in data mining and hybrid processes. Beginning with an introduction to chemical concepts and polymer flooding, the book then focuses on more complex content, guiding readers into newer topics involving smart water injection and ionic liquids for EOR. Supported field case studies illustrate a bridge between research and practical application, thus making the book useful for academics and practicing engineers. This series delivers a multi-volume approach that addresses the latest research on various types of EOR. Supported by a full spectrum of contributors, this book gives petroleum engineers and researchers the latest developments and field applications to drive innovation for the future of energy. - Presents the latest research and practical applications specific to chemical enhanced oil recovery methods - Helps users understand new research on available technology, including chemical flooding specific to unconventional reservoirs and hybrid chemical options - Includes additional methods, such as data mining applications and economic and environmental considerations
Download or read book Acid Gas Injection and Related Technologies written by Ying Wu and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large producers have started to use gas injection for their applications and in the future it is predicted that this trend will increase. This book is the most comprehensive and up-to-date coverage of this technique, which is rapidly increasing in importance and usage in the natural gas and petroleum industry. The authors, a group of the most well-known and respected in the field, discuss, in a series of papers, this technology and related technologies as to how they can best be used by industry to creating a safer, cleaner environment.
Download or read book Chemical Enhanced Oil Recovery written by Patrizio Raffa and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-07-22 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at presenting, describing, and summarizing the latest advances in polymer flooding regarding the chemical synthesis of the EOR agents and the numerical simulation of compositional models in porous media, including a description of the possible applications of nanotechnology acting as a booster of traditional chemical EOR processes. A large part of the world economy depends nowadays on non-renewable energy sources, most of them of fossil origin. Though the search for and the development of newer, greener, and more sustainable sources have been going on for the last decades, humanity is still fossil-fuel dependent. Primary and secondary oil recovery techniques merely produce up to a half of the Original Oil In Place. Enhanced Oil Recovery (EOR) processes are aimed at further increasing this value. Among these, chemical EOR techniques (including polymer flooding) present a great potential in low- and medium-viscosity oilfields. • Describes recent advances in chemical enhanced oil recovery. • Contains detailed description of polymer flooding and nanotechnology as promising boosting tools for EOR. • Includes both experimental and theoretical studies. About the Authors Patrizio Raffa is Assistant Professor at the University of Groningen. He focuses on design and synthesis of new polymeric materials optimized for industrial applications such as EOR, coatings and smart materials. He (co)authored about 40 articles in peer reviewed journals. Pablo Druetta works as lecturer at the University of Groningen (RUG) and as engineering consultant. He received his Ph.D. from RUG in 2018 and has been teaching at a graduate level for 15 years. His research focus lies on computational fluid dynamics (CFD).
Download or read book Handbook of Industrial Hydrocarbon Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2010-12-24 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with over 38 years of experience in the chemical and petrochemical process industry, this handbook will present an analysis of the process steps used to produce industrial hydrocarbons from various raw materials. It is the first book to offer a thorough analysis of external factors effecting production such as: cost, availability and environmental legislation. An A-Z list of raw materials and their properties are presented along with a commentary regarding their cost and availability. Specific processing operations described in the book include: distillation, thermal cracking and coking, catalytic methods, hydroprocesses, thermal and catalytic reforming, isomerization, alkylation processes, polymerization processes, solvent processes, water removal, fractionation and acid gas removal. - Flow diagrams and descriptions of more than 250 leading-edge process technologies - An analysis of chemical reactions and process steps that are required to produce chemicals from various raw materials - Properties, availability and environmental impact of various raw materials used in hydrocarbon processing
Download or read book Thermal Methods of Oil R written by Burger J. and published by Editions OPHRYS. This book was released on 1985 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
