Download or read book Gas cooled Reactors Today Advances in fuel core and structural materials written by and published by . This book was released on 1982 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas cooled Reactors Today written by and published by . This book was released on 1982 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Materials for Generation IV Nuclear Reactors written by Pascal Yvon and published by Woodhead Publishing. This book was released on 2016-08-27 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. - Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials - Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates - Written by an expert in that particular area
Download or read book Gas cooled Reactors Today written by and published by . This book was released on 1982 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers are organised by the following session titles: 'Magnox Experience and Nuclear Fuel Testing', 'AGR Fuel', 'Graphite Corrosion and Coolant Chemistry', 'HTR and GCFR Fuel', 'Structural Materials in Helium-cooled Reactors' and 'Structural Materials for Magnox and AGRs'.
Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors' unique personal insight from decades of frontline research, engineering and management. - Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. - Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. - Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Download or read book Advances in High Temperature Gas Cooled Reactor Fuel Technology written by International Atomic Energy Agency and published by . This book was released on 2012-06 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication reports on the results of a coordinated research project on advances in high temperature gas cooled reactor (HTGR) fuel technology and describes the findings of research activities on coated particle developments. These comprise two specific benchmark exercises with the application of HTGR fuel performance and fission product release codes, which helped compare the quality and validity of the computer models against experimental data. The project participants also examined techniques for fuel characterization and advanced quality assessment/quality control. The key exercise included a round-robin experimental study on the measurements of fuel kernel and particle coating properties of recent Korean, South African and US coated particle productions applying the respective qualification measures of each participating Member State. The summary report documents the results and conclusions achieved by the project and underlines the added value to contemporary knowledge on HTGR fuel.
Download or read book Improving Fuel Cycle Design and Safety Characteristics of a Gas Cooled Fast Reactor written by Willem Frederik Geert van Rooijen and published by IOS Press. This book was released on 2006 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Generation IV Forum is an international nuclear energy research initiative aimed at developing the fourth generation of nuclear reactors, envisaged to enter service halfway the 21st century. One of the Generation IV reactor systems is the Gas Cooled Fast Reactor (GCFR), the subject of study in this thesis. The Generation IV reactor concepts should improve all aspects of nuclear power generation. Within Generation IV, the GCFR concept specifically targets sustainability of nuclear power generation. The Gas Cooled Fast Reactor core power density is high in comparison to other gas cooled reactor concepts. Like all nuclear reactors, the GCFR produces decay heat after shut down, which has to be transported out of the reactor under all circumstances. The layout of the primary system therefore focuses on using natural convection Decay Heat Removal (DHR) where possible, with a large coolant fraction in the core to reduce friction losses.
Download or read book High Temperature Gas cooled Reactors written by Tetsuaki Takeda and published by Academic Press. This book was released on 2021-02-24 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Temperature Gas Reactors is the fifth volume in the JSME Series on Thermal and Nuclear Power Generation. Series Editor Yasuo Koizumi and his Volume editors Tetsuaki Takeda and Yoshiyuki Inagaki present the latest research on High-Temperature Gas Reactor (HTGR) development and utilization, beginning with an analysis of the history of HTGRs. A detailed analysis of HTGR design features, including reactor core design, cooling tower design, pressure vessel design, I&C factors and safety design, provides readers with a solid understanding of how to develop efficient and safe HTGR within a nuclear power plant. The authors combine their knowledge to present a guide on the safety of HTGRs throughout the entire reactor system, drawing on their unique experience to pass on lessons learned and best practices to support professionals and researchers in their design and operation of these advanced reactor types. Case studies of critical testing carried out by the authors provide the reader with firsthand information on how to conduct tests safely and effectively and an understanding of which responses are required in unexpected incidents to achieve their research objectives. An analysis of technologies and systems in development and testing stages offer the reader a look to the future of HTGRs and help to direct and inform their further research in heat transfer, fluid-dynamics, fuel options and advanced reactor facility selection. This volume is of interest for nuclear and thermal energy engineers and researchers focusing on HTGRs, HTGR plant designers and operators, regulators, post graduate students of nuclear engineering, national labs, government officials and agencies in power and energy policy and regulations. Written by the leaders and pioneers in nuclear research at the Japanese Society of Mechanical Engineers and draws upon their combined wealth of knowledge and experience Includes real examples and case studies from Japan, the US and Europe to provide a deeper learning opportunity with practical benefits Considers the societal impact and sustainability concerns and goals throughout the discussion Includes safety factors and considerations, as well as unique results from performance testing of HTGR systems.
Download or read book Gas cooled Reactors Today written by British Nuclear Energy Society and published by . This book was released on 1982 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fast Spectrum Reactors written by Alan E. Waltar and published by Springer Science & Business Media. This book was released on 2011-09-28 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a complete update of the classic 1981 FAST BREEDER REACTORS textbook authored by Alan E. Waltar and Albert B. Reynolds, which , along with the Russian translation, served as a major reference book for fast reactors systems. Major updates include transmutation physics (a key technology to substantially ameliorate issues associated with the storage of high-level nuclear waste ), advances in fuels and materials technology (including metal fuels and cladding materials capable of high-temperature and high burnup), and new approaches to reactor safety (including passive safety technology), New chapters on gas-cooled and lead-cooled fast spectrum reactors are also included. Key international experts contributing to the text include Chaim Braun, (Stanford University) Ronald Omberg, (Pacific Northwest National Laboratory, Massimo Salvatores (CEA, France), Baldev Raj, (Indira Gandhi Center for Atomic Research, India) , John Sackett (Argonne National Laboratory), Kevan Weaver, (TerraPower Corporation) ,James Seinicki(Argonne National Laboratory). Russell Stachowski (General Electric), Toshikazu Takeda (University of Fukui, Japan), and Yoshitaka Chikazawa (Japan Atomic Energy Agency).
Download or read book The ORNL Gas cooled Reactor written by Oak Ridge National Laboratory and published by . This book was released on 1958 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials Under Extreme Radiation and Temperature Environments of the Next Generation Nuclear Reactors written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In the nuclear energy renaissance, driven by fission reactor concepts utilizing very high temperatures and fast neutron spectra, materials with enhanced performance that exceeds are expected to play a central role. With the operating temperatures of the Generation III reactors bringing the classical reactor materials close to their performance limits there is an urgent need to develop and qualify new alloys and composites. Efforts have been focused on the intricate relations and the high demands placed on materials at the anticipated extreme states within the next generation fusion and fission reactors which combine high radiation fluxes, elevated temperatures and aggressive environments. While nuclear reactors have been in operation for several decades, the structural materials associated with the next generation options need to endure much higher temperatures (1200 C), higher neutron doses (tens of displacements per atom, dpa), and extremely corrosive environments, which are beyond the experience on materials accumulated to-date. The most important consideration is the performance and reliability of structural materials for both in-core and out-of-core functions. While there exists a great body of nuclear materials research and operating experience/performance from fission reactors where epithermal and thermal neutrons interact with materials and alter their physio-mechanical properties, a process that is well understood by now, there are no operating or even experimental facilities that will facilitate the extreme conditions of flux and temperature anticipated and thus provide insights into the behaviour of these well understood materials. Materials, however, still need to be developed and their interaction and damage potential or lifetime to be quantified for the next generation nuclear energy. Based on material development advances, composites, and in particular ceramic composites, seem to inherently possess properties suitable for key functions within the operating envelope of both fission and fusion reactors. In advanced fission reactors composite materials are being designed in an effort to extend the life and improve the reliability of fuel rod cladding as well as structural materials. Composites are being considered for use as core internals in the next generation of gas-cooled reactors. Further, next-generation plasma-fusion reactors, such as the International Thermonuclear Experimental Reactor (ITER) will rely on the capabilities of advanced composites to safely withstand extremely high neutron fluxes while providing superior thermal shock resistance.
Download or read book Maritime Gas Cooled Reactor Program Quarterly Progress Report written by and published by . This book was released on 1958-12-31 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Advisory Board Civilian Nuclear Power Panel Subpanel II written by and published by . This book was released on 1986 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas cooled Reactors in the USA written by R. H. Armstrong and published by . This book was released on 1960 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study was made of approximately 132 reports on gas-cooled reactors and related subjects. Charts and tables containing the following information are included: all available reactor information, reactor flow diagrams of suggested concepts, possible core arrangement at core cross section, typical fuel and moderator cell, possible fuel types for unit fuel cell, the properties of materials for moderators and reflectors. the compatibility of gases and base fuel materials at maximum surface temperatures, maximum interface temperatures of fuel elements and core-jacket combinations, allowable operating temperatures and compatibility of gases and various metals. preferences for gas coolants, cost and availability of gases plant thermal cycle efficiencies, thermal properties of gases, pumping power and reactor coolant inlet temperatures, obtainable heat fluxes, composition and physical properties of potential cladding materials. atomic and thermal properties of cladding materials, fabrication characteristics and costs of cladding materials, possible process applications of gases at high temperature, and potential high-temperature materials. The various categories of gas-cooled reactors and examples of each type are discussed. A gas reactor program for high-temperature experimentation is proposed.
Download or read book Survey of Component Requirements and Availability for Gas cooled Nuclear Reactor Power Plants written by T. C. Yen and published by . This book was released on 1961 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas cooled Reactor Program Quarterly Progress Report for Period Ending written by Oak Ridge National Laboratory and published by . This book was released on 1960-03-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
