Download or read book Gallium Nitride GaN II written by and published by Academic Press. This book was released on 1998-10-22 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The "Willardson and Beer" Series, as it is widely known, has succeeded in publishing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise indeed that this tradition will be maintained and even expanded.Reflecting the truly interdisciplinary nature of the field that the series covers, the volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in modern industry.

Download or read book Gallium Nitride enabled High Frequency and High Efficiency Power Conversion written by Gaudenzio Meneghesso and published by Springer. This book was released on 2018-05-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates to readers why Gallium Nitride (GaN) transistors have a superior performance as compared to the already mature Silicon technology. The new GaN-based transistors here described enable both high frequency and high efficiency power conversion, leading to smaller and more efficient power systems. Coverage includes i) GaN substrates and device physics; ii) innovative GaN -transistors structure (lateral and vertical); iii) reliability and robustness of GaN-power transistors; iv) impact of parasitic on GaN based power conversion, v) new power converter architectures and vi) GaN in switched mode power conversion. Provides single-source reference to Gallium Nitride (GaN)-based technologies, from the material level to circuit level, both for power conversions architectures and switched mode power amplifiers; Demonstrates how GaN is a superior technology for switching devices, enabling both high frequency, high efficiency and lower cost power conversion; Enables design of smaller, cheaper and more efficient power supplies.

Download or read book Compound Semiconductors 2002 written by Marc Ilegems and published by CRC Press. This book was released on 2003-09-01 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major showcase for the compound semiconductor community, Compound Semiconductors 2002 presents an overview of recent developments in compound semiconductor physics and its technological applications to devices. The topics discussed reflect the significant progress achieved in understanding and mastering compound semiconductor materials and electronic and optoelectronic devices. The book covers heteroepitaxial growth, quantum confined emitters and detectors, quantum wires and dots, ultrafast transistors, and various compound materials.

Download or read book Optical Constants of Crystalline and Amorphous Semiconductors written by Sadao Adachi and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of the refractive indices and absorption coefficients of semiconductors is especially import in the design and analysis of optical and optoelectronic devices. The determination of the optical constants of semiconductors at energies beyond the fundamental absorption edge is also known to be a powerful way of studying the electronic energy-band structures of the semiconductors. The purpose of this book is to give tabulated values and graphical information on the optical constants of the most popular semiconductors over the entire spectral range. This book presents data on the optical constants of crystalline and amorphous semiconductors. A complete set of the optical constants are presented in this book. They are: the complex dielectric constant (E=e.+ieJ, complex refractive index (n*=n+ik), absorption coefficient (a.), and normal-incidence reflectivity (R). The semiconductor materials considered in this book are the group-IV elemental and binary, llI-V, IT-VI, IV-VI binary semiconductors, and their alloys. The reader will fmd the companion book "Optical Properties of Crystalline and Amorphous Semiconductors: Materials and Fundamental Principles" useful since it emphasizes the basic material properties and fundamental prinCiples.

Download or read book GaN and Related Alloys 1999 Volume 595 written by Thomas H. Myers and published by . This book was released on 2000-05-05 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on gallium nitride (GaN) and associated materials focuses on advances in basic science, as well as the rapidly maturing technologies involving blue/green light emitters, detectors and high-power electronics. A highlight is a report on wide-bandgap semiconductor research done in Europe. Also reported is the commercialization of a laser operating at 405nm wavelength with a 4000-hour device lifetime. At 450nm emission wavelength, significant reductions in lifetime were found, and are believed to arise from nonideal properties of the InGaN alloy used in the active layer of the device. Additional topics include: the significant success of transistors for microwave applications; improvements in the epitaxy of GaN, using both selective area growth techniques (lateral epitaxy overgrowth) and introducing low-temperature intralayers in the films; advances in both molecular beam epitaxy and metal-organic vapor phase epitaxy, including several studies of quantum dot formation in strained alloys and improvements in hydride vapor phase epitaxy, particularly for providing very thick films.

Download or read book GaN based Materials and Devices written by Michael Shur and published by World Scientific. This book was released on 2004 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique materials properties of GaN-based semiconductors have stimulated a great deal of interest in research and development regarding nitride materials growth and optoelectronic and nitride-based electronic devices. High electron mobility and saturation velocity, high sheet carrier concentration at heterojunction interfaces, high breakdown field, and low thermal impedance of GaN-based films grown over SiC or bulk AlN substrates make nitride-based electronic devices very promising. The chemical inertness of nitrides is another key property.This volume, written by experts on different aspects of nitride technology, addresses the entire spectrum of issues related to nitride materials and devices, and it will be useful for technologists, scientists, engineers, and graduate students who are working on wide bandgap materials and devices. The book can also be used as a supplementary text for graduate courses on wide bandgap semiconductor technology.

Download or read book Epitaxy written by Marian A. Herman and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a uniform and comprehensive manner the authors describe all the important aspects of the epitaxial growth processes of solid films on crystalline substrates, e.g. processes in which atoms of the growing film mimic the arrangement of the atoms of the substrate. Emphasis is put on sufficiently fundamental and unequivocal presentation of the subject in the form of an easy-to-read review. A large part of this book focuses on the problems of heteroepitaxy. The most important epitaxial growth techniques which are currently widely used in basic research as well as in manufacturing processes of devices are presented and discussed in detail.

Download or read book Handbook of GaN Semiconductor Materials and Devices written by Wengang (Wayne) Bi and published by CRC Press. This book was released on 2017-10-20 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses material growth, device fabrication, device application, and commercialization of energy-efficient white light-emitting diodes (LEDs), laser diodes, and power electronics devices. It begins with an overview on basics of semiconductor materials, physics, growth and characterization techniques, followed by detailed discussion of advantages, drawbacks, design issues, processing, applications, and key challenges for state of the art GaN-based devices. It includes state of the art material synthesis techniques with an overview on growth technologies for emerging bulk or free standing GaN and AlN substrates and their applications in electronics, detection, sensing, optoelectronics and photonics. Wengang (Wayne) Bi is Distinguished Chair Professor and Associate Dean in the College of Information and Electrical Engineering at Hebei University of Technology in Tianjin, China. Hao-chung (Henry) Kuo is Distinguished Professor and Associate Director of the Photonics Center at National Chiao-Tung University, Hsin-Tsu, Taiwan, China. Pei-Cheng Ku is an associate professor in the Department of Electrical Engineering & Computer Science at the University of Michigan, Ann Arbor, USA. Bo Shen is the Cheung Kong Professor at Peking University in China.

Download or read book Gallium Nitride and Related Wide Bandgap Materials and Devices written by R. Szweda and published by Elsevier. This book was released on 2000-07-07 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Gallium Nitride & Related Wide Bandgap Materials and Devices provides a detailed insight into the global developments in GaN, SiC and other optoelectronic materials. This report also examines the implication for both suppliers and users of GaN technology. For a PDF version of the report please call Tina Enright on +44 (0) 1865 843008 for price details.

Download or read book Gallium Nitride GaN written by Farid Medjdoub and published by CRC Press. This book was released on 2017-12-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses a Growing Need for High-Power and High-Frequency Transistors Gallium Nitride (GaN): Physics, Devices, and Technology offers a balanced perspective on the state of the art in gallium nitride technology. A semiconductor commonly used in bright light-emitting diodes, GaN can serve as a great alternative to existing devices used in microelectronics. It has a wide band gap and high electron mobility that gives it special properties for applications in optoelectronic, high-power, and high-frequency devices, and because of its high off-state breakdown strength combined with excellent on-state channel conductivity, GaN is an ideal candidate for switching power transistors. Explores Recent Progress in High-Frequency GaN Technology Written by a panel of academic and industry experts from around the globe, this book reviews the advantages of GaN-based material systems suitable for high-frequency, high-power applications. It provides an overview of the semiconductor environment, outlines the fundamental device physics of GaN, and describes GaN materials and device structures that are needed for the next stage of microelectronics and optoelectronics. The book details the development of radio frequency (RF) semiconductor devices and circuits, considers the current challenges that the industry now faces, and examines future trends. In addition, the authors: Propose a design in which multiple LED stacks can be connected in a series using interband tunnel junction (TJ) interconnects Examine GaN technology while in its early stages of high-volume deployment in commercial and military products Consider the potential use of both sunlight and hydrogen as promising and prominent energy sources for this technology Introduce two unique methods, PEC oxidation and vapor cooling condensation methods, for the deposition of high-quality oxide layers A single-source reference for students and professionals, Gallium Nitride (GaN): Physics, Devices, and Technology provides an overall assessment of the semiconductor environment, discusses the potential use of GaN-based technology for RF semiconductor devices, and highlights the current and emerging applications of GaN.

Download or read book GaN Transistors for Efficient Power Conversion written by Alex Lidow and published by John Wiley & Sons. This book was released on 2019-08-12 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.

Download or read book ICAME 2007 written by N.S. Gajbhiye and published by Springer Science & Business Media. This book was released on 2009-04-05 with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disordered nature of structural arrangement in amorphous and nanocrystalline alloys gives rise to advantageous soft magnetic properties in particular from a practical application viewpoint [1]. Especially nanocrystalline alloys attract a lot of scienti?c interest because, contrary to their amorphous counterparts, their magnetic parameters do not substantially deteriorate at elevated temperatures during the process of their practical exploitation. To bene?t from their unique magnetic pr- erties, the mechanism of crystallization should be known. Here, we present the study of structural transformation of NANOPERM-type alloys by the help of Mössbauer spectrometry, conventional X-ray diffraction (XRD), and by an advanced diffraction of synchrotron radiation. 2 Experimental Alloys of the composition Fe Mo Cu B for x = 12, 15, 17, 20 prepared by 91?x 8 1 x 57 rapid quenching on a rotating wheel were analyzed in the as-cast state by Fe transmission Mössbauer spectrometry (TMS) and by conversion electron Mössbauer spectrometry (CEMS). The obtained as-quenched ribbons were about 10 mm wide and 20 ?m thick. The nanocrystalline state was achieved by annealing about 2 cm ? long samples for 1 h at temperatures up to 650 C in a vacuum. Conventional XRD was performed with Cu-K radiation in Bragg-Brentano con?guration with graphite ? monochromator in the diffracted beam. Monochromatic synchrotron radiation of 7keV(? = 0. 178 nm) provided at the KMC-2 beamline at BESSY Berlin was used for in situ examinations of structural transformations during continuous heat treatment.

Download or read book Nitride Semiconductor Devices written by Joachim Piprek and published by John Wiley & Sons. This book was released on 2007-04-09 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to be published on physical principles, mathematical models, and practical simulation of GaN-based devices. Gallium nitride and its related compounds enable the fabrication of highly efficient light-emitting diodes and lasers for a broad spectrum of wavelengths, ranging from red through yellow and green to blue and ultraviolet. Since the breakthrough demonstration of blue laser diodes by Shuji Nakamura in 1995, this field has experienced tremendous growth worldwide. Various applications can be seen in our everyday life, from green traffic lights to full-color outdoor displays to high-definition DVD players. In recent years, nitride device modeling and simulation has gained importance and advanced software tools are emerging. Similar developments occurred in the past with other semiconductors such as silicon, where computer simulation is now an integral part of device development and fabrication. This book presents a review of modern device concepts and models, written by leading researchers in the field. It is intended for scientists and device engineers who are interested in employing computer simulation for nitride device design and analysis.

Download or read book 4M 2006 Second International Conference on Multi Material Micro Manufacture written by Stefan Dimov and published by Elsevier. This book was released on 2006-09-15 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4M 2006 - Second International Conference on Multi-Material Micro Manufacture covers the latest state-of-the-art research results from leading European researchers in advanced micro technologies for batch processing of metals, polymers, and ceramics, and the development of new production platforms for micro systems-based products. These contributions are from leading authors at a platform endorsed and funded by the European Union R&D community, as well as leading universities, and independent research and corporate organizations. - Contains authoritative papers that reflect the latest developments in micro technologies and micro systems-based products

Download or read book Optoelectronic Devices written by M Razeghi and published by Elsevier. This book was released on 2004 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous progress has been made in the last few years in the growth, doping and processing technologies of the wide bandgap semiconductors. As a result, this class of materials now holds significant promis for semiconductor electronics in a broad range of applications. The principal driver for the current revival of interest in III-V Nitrides is their potential use in high power, high temperature, high frequency and optical devices resistant to radiation damage. This book provides a wide number of optoelectronic applications of III-V nitrides and covers the entire process from growth to devices and applications making it essential reading for those working in the semiconductors or microelectronics. Broad review of optoelectronic applications of III-V nitrides

Download or read book Springer Handbook of Electronic and Photonic Materials written by Safa Kasap and published by Springer. This book was released on 2017-10-04 with total page 1536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second, updated edition of this essential reference book provides a wealth of detail on a wide range of electronic and photonic materials, starting from fundamentals and building up to advanced topics and applications. Its extensive coverage, with clear illustrations and applications, carefully selected chapter sequencing and logical flow, makes it very different from other electronic materials handbooks. It has been written by professionals in the field and instructors who teach the subject at a university or in corporate laboratories. The Springer Handbook of Electronic and Photonic Materials, second edition, includes practical applications used as examples, details of experimental techniques, useful tables that summarize equations, and, most importantly, properties of various materials, as well as an extensive glossary. Along with significant updates to the content and the references, the second edition includes a number of new chapters such as those covering novel materials and selected applications. This handbook is a valuable resource for graduate students, researchers and practicing professionals working in the area of electronic, optoelectronic and photonic materials.

Download or read book Mineral Commodity Summaries written by and published by Government Printing Office. This book was released on 2012-04-05 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides information on the domestic industry structure, Government programs, tariffs, and 5-year salient statistics for more than 90 individual minerals and materials.