Download or read book The Global Automotive Industry written by Paul Nieuwenhuis and published by John Wiley & Sons. This book was released on 2015-10-12 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is still one of the world's largest manufacturing sectors, but it suffers from being very technology-focused as well as being relatively short-term focused. There is little emphasis within the industry and its consultancy and analyst supply network on the broader social and economic impacts of automobility and of the sector that provides it. The Global Automotive Industry addresses this need and is a first port of call for any academic, official or consultant wanting an overview of the state of the industry. An international team of specialist researchers, both from academia and business, review and analyse the key issues that make vehicle manufacturing still the world’s premier manufacturing sector, closely tied in with the fortunes of both established and newly emerging economies. In doing so, it covers issues related to manufacturing, both established practices as well as new developments; issues relating to distribution, marketing and retail, vehicle technologies and regulatory trends; and, crucially, labour practices and the people who build cars. In all this it explains both how the current situation arose and also likely future trajectories both in terms of social and regulatory trends, as the technological, marketing and labour practice responses to those, leading in many cases to the development of new business models. Key features Provides a global overview of the automotive industry, covering its current state and considering future challenges Contains contributions from international specialists in the automotive sector Presents current research and sets this in an historical and broader industry context Covers threats to the industry, including globalization, economic and environmental sustainability The Global Automotive Industry is a must-have reference for researchers and practitioners in the automotive industry and is an excellent source of information for business schools, governments, and graduate and undergraduate students in automotive engineering.
Download or read book The Future of the Automobile written by Alan A. Altshuler and published by MIT Press. This book was released on 1984 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cited by Business Week as one of 1984's ten best books on business and economics, The Future of the Automobile is the most comprehensive assessment ever conducted of the world's largest industry.
Download or read book The Future of the World Motor Industry written by Krish N. Bhaskar and published by London : K. Page. This book was released on 1980 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Great Race written by Levi Tillemann and published by Simon and Schuster. This book was released on 2016-01-19 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Great Race recounts the exciting story of a century-long battle among automakers for market share, profit, and technological dominance—and the thrilling race to build the car of the future. The world’s great manufacturing juggernaut—the $3 trillion automotive industry—is in the throes of a revolution. Its future will include cars Henry Ford and Karl Benz could scarcely imagine. They will drive themselves, won’t consume oil, and will come in radical shapes and sizes. But the path to that future is fraught. The top contenders are two traditional manufacturing giants, the US and Japan, and a newcomer, China. Team America has a powerful and little-known weapon in its arsenal: a small group of technology buffs and regulators from California. The story of why and how these men and women could shape the future—how you move, how you work, how you live on Earth—is an unexpected tale filled with unforgettable characters: a scorned chemistry professor, a South African visionary who went for broke, an ambitious Chinese ex-pat, a quixotic Japanese nuclear engineer, and a string of billion-dollar wagers by governments and corporations. “To explain the scramble for the next-generation auto—and the roles played in that race by governments, auto makers, venture capitalists, environmentalists, and private inventors—comes Levi Tillemann’s The Great Race…Mr. Tillemann seems ideally cast to guide us through the big ideas percolating in the world’s far-flung workshops and labs” (The Wall Street Journal). His account is incisive and riveting, explaining how America bounced back in this global contest and what it will take to command the industrial future.
Download or read book Restructuring the Global Automobile Industry written by Christopher M. Law and published by Routledge. This book was released on 2017-07-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1991, this book examines the spatial implications of the changes to the automobile industry at world, national and local levels. The volume brings together the work of North American, European and Japanese geographers, economists and sociologists, and includes perspectives from the components industry, the shop floor experience and local economic policy making.
Download or read book Wrecked written by Joshua Murray and published by Russell Sage Foundation. This book was released on 2019-06-13 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: At its peak in the 1950s and 1960s, automobile manufacturing was the largest, most profitable industry in the United States and residents of industry hubs like Detroit and Flint, Michigan had some of the highest incomes in the country. Over the last half-century, the industry has declined, and American automakers now struggle to stay profitable. How did the most prosperous industry in the richest country in the world crash and burn? In Wrecked, sociologists Joshua Murray and Michael Schwartz offer an unprecedented historical-sociological analysis of the downfall of the auto industry. Through an in-depth examination of labor relations and the production processes of automakers in the U.S. and Japan both before and after World War II, they demonstrate that the decline of the American manufacturers was the unintended consequence of their attempts to weaken the bargaining power of their unions. Today Japanese and many European automakers produce higher quality cars at lower cost than their American counterparts thanks to a flexible form of production characterized by long-term sole suppliers, assembly and supply plants located near each other, and just-in-time delivery of raw materials. While this style of production was, in fact, pioneered in the U.S. prior to World War II, in the years after the war, American automakers deliberately dismantled this system. As Murray and Schwartz show, flexible production accelerated innovation but also facilitated workers’ efforts to unionize plants and carry out work stoppages. To reduce the efficacy of strikes and combat the labor militancy that flourished between the Depression and the postwar period, the industry dispersed production across the nation, began maintaining large stockpiles of inventory, and eliminated single sourcing. While this restructuring of production did ultimately reduce workers’ leverage, it also decreased production efficiency and innovation. The U.S. auto industry has struggled ever since to compete with foreign automakers, and formerly thriving motor cities have suffered the consequences of mass deindustrialization. Murray and Schwartz argue that new business models that reinstate flexible production and prioritize innovation rather than cheap labor could stem the outsourcing of jobs and help revive the auto industry. By clarifying the historical relationships between production processes, organized labor, and industrial innovation, Wrecked provides new insights into the inner workings and decline of the U.S. auto industry.
Download or read book New Frontiers of the Automobile Industry written by Alex Covarrubias V. and published by Springer Nature. This book was released on 2019-11-28 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysing developments in digital technologies and institutional changes, this book provides an overview of the current frenetic state of transformation within the global automobile industry. An ongoing transition brought about by the relocation of marketing, design and production centres to emerging economies, and experimentation with new mobility systems such as electrical, autonomous vehicles, this process poses the question as to how original equipment manufacturers (OEMs) and newcomers can remain competitive and ensure sustainability. With contributions from specialists in the automobile sector, this collection examines the shifts in power and geographical location occurring in the industry, and outlines the key role that public policy has in generating innovation in entrepreneurial states. Offering useful insights into the challenges facing emerging economies in their attempts to grow within the automobile industry, this book will provide valuable reading for those researching internationalization and emerging markets, business strategy and more specifically, the automotive industry.
Download or read book Automotive Fuel Economy written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents realistic estimates for the level of fuel economy that is achievable in the next decade for cars and light trucks made in the United States and Canada. A source of objective and comprehensive information on the topic, this book takes into account real-world factors such as the financial conditions in the automotive industry, costs and benefits to consumers, and marketability of high-efficiency vehicles. The committee is composed of experts from the fields of science, technology, finance, and regulation and offers practical evaluations of technological improvements that could contribute to increased fuel efficiency. The volume also examines potential barriers to improvement, such as high production costs, regulations on safety and emissions, and consumer preferences. This practical book is of considerable interest to car and light truck manufacturers, policymakers, federal and state agencies, and the public.
Download or read book Future of the Automobile Industry written by United States. Congress. House. Committee on Energy and Commerce. Subcommittee on Commerce, Transportation, and Tourism and published by . This book was released on 1984 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Automotive Industry and the Environment written by P Nieuwenhuis and published by Elsevier. This book was released on 2003-07-25 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry currently faces huge challenges. The fundamental technological paradigm it relies on, volume production, has become progressively more unprofitable in the face of increasingly segmented niche markets. At the same time it faces increasing regulatory and social pressures to improve both the sustainability of its products and methods of production. Building on a wealth of research, The automotive industry and the environment addresses those challenges and how they can be met in producing a sustainable and profitable industry for the future.The authors first discuss the development of the automotive industry and the problems it currently faces. They then consider the solutions the industry can adopt. The book reviews trends in more environmentally-friendly technologies such as the use of more sustainable fuel sources and new types of modular design with built-in recyclability. However, these technologies can only be fully exploited if methods of manufacture change. The book also describes models of decentralised production, particularly the micro factory retailing (MFR) model, which provide an alternative to volume production and promise to be both more sustainable and more profitable.The automotive industry and the environment provides both a cogent diagnosis of the environmental and other problems facing the industry and a blueprint for a better future. It will be widely welcomed by the industry, policy makers and all those concerned with sustainable transport. - Addresses the challenges facing the automotive industry, from the increasing unprofitability of volume production to regulatory and social pressures to improve environmental and product sustainability - Examines how the automotive industry can meet the current challenges in producing a sustainable and profitable industry for the future - Reviews trends in more environmentally-friendly technologies such as the use of more sustainable fuel sources and new types of modular design with built-in recyclability
Download or read book The Mobility Revolution written by Lukas Neckermann and published by Troubador Publishing Ltd. This book was released on 2018-12-12 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: We stand at the cusp of a mobility revolution unlike anything we have seen since the days of Gottlieb Daimler and Henry Ford, 130 years ago.
Download or read book The Future of Canada s Auto Industry written by Ross Perry and published by James Lorimer & Company. This book was released on 1982 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the back cover: In this study, economist Ross Perry shows that all indicators point to a further restriction in the Canadian auto industry, resulting in further shrinkage of employment and the possibility of a major deterioration in the country's balance of payments. While the objective of the Auto Pact and Canadian automotive trade policy has always been job creation, Perry concludes that it will be increasingly difficult for the Canadian industry to be both viable and to generate jobs for the industrial heartland of Southern Ontario. Perry examines areas of specialization where Canada, with its advantages in energry-intensive products, could be competitive in the world market, and he outlines the two basic options for national policymakers - restructuring the industry for viability or resisting its decline.
Download or read book The Multinational Motor Industry RLE International Business written by George Maxcy and published by Routledge. This book was released on 2013-01-04 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyses the multinational enterprise using the example of the world motor industry. It begins by examining the multinational enterprise in general, considering its nature, the economic theory of its behaviour and is effects on the nation state. It goes on to explore the growth and development of the multinational motor industry, and then surveys the state of the motor industry, and the role of multinationals in it, in various types of economy, using case studies from the UK, USA, Canada, Australia, Brazil and India.
Download or read book Japan and the Global Automotive Industry written by Koichi Shimokawa and published by Cambridge University Press. This book was released on 2010-06-03 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Japanese automotive industry enjoyed spectacular success in the 1980s. This was largely due to the so-called 'Lean Production System' - the combination of an efficient production system, an effective supplier system, and a product development system. In the 1990s the industry fell on hard times because of the Japanese asset price bubble and extreme currency appreciation. In this book, eminent industry specialist Koichi Shimokawa draws on his thirty years of research and fieldwork with Japanese and American firms, to show how the Japanese automotive industry has managed to recover from this difficult period. He shows how firms like Toyota were able to transfer Japanese systems to overseas plants and how they have changed in order to compete in increasingly globalized markets. In addition, the book also addresses the two major challenges to the current industry model: the rise of China and the environmental and energy supply situation.
Download or read book Operations Management in Automotive Industries written by Marco Gobetto and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has proved its worth over the years as a text for courses in Production Management at the Faculty of Automotive Engineering in Turin, Italy, but deserves a wider audience as it presents a compendium of basics on Industrial Management, since it covers all major topics required. It treats all subjects from product development and “make or buy”-decision strategies to the manufacturing systems setting and management through analysis of the main resources needed in production and finally exploring the supply chain management and the procurement techniques. The very last chapter recapitulates the previous ones by analysing key management indicators to pursue the value creation that is the real purpose of every industrial enterprise. As an appendix, a specific chapter is dedicated to the basics of production management where all main relevant definitions, techniques and criteria are treated, including some numerical examples, in order to provide an adequate foundation for understanding the other chapters. This book will be of use not only to Automotive Engineering students but a wide range of readers who wish to gain insight in the world of automotive engineering and the automotive industry in general.
Download or read book Build To Order written by Glenn Parry and published by Springer Science & Business Media. This book was released on 2008-07-23 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 100 years the European Automotive Industry has been repeatedly challenged by best practice. First by the United States, through the development of ‘mass production’ pioneered by Henry Ford and more recently by ‘lean production techniques’ as practised by the leading Japanese producers, particularly Toyota. It has consistently risen to these challenges and has shown it can compete and even outperform its competitors with world-class products. However, the European - dustry is now faced with growing competition and growth from new emerging low-cost countries and needs to re-define its competitive advantage to remain at the forefront of the sector. Automotive growth is driven by two factors, new m- kets and new technologies. Global competition is increasing, with technology and product differentiation becoming the most important sales factors, but with c- tinued cost pressure. Within the market the winners will be more profitable and the losers will disappear. The Automotive Industry makes a significant contribution to the socio-economic fabric of the European Union. Manufacturing output represents €700 billion and research and development spending €24 billion. European automotive suppliers number 5000 member companies and represent 5 million employees and generate €500 billion in revenues. These are significant figures that generate wealth and high value employment within the EU. European firms must consistently improve their competitive position to ensure that the industry does not migrate to growing new markets.
Download or read book The Automotive Industry and the Global Environment written by William Glaze and published by SAE International. This book was released on 1999-08-20 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an analysis on the potential effects of globalization on the automotive industry and the environment. Energy challenges, market economy growth, and population dynamics are considered. The authors also present future scenarios for transportation technologies to meet the ever growing global demand for transportation of goods and services while minimizing energy and environmental impacts and maximizing cost, value and widespread acceptance.
