Download or read book Fusion Reactor Design written by Takashi Okazaki and published by John Wiley & Sons. This book was released on 2022-03-14 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion Reactor Design Provides a detailed overview of fusion reactor design, written by an international leader in the field Nuclear fusion—generating four times as much energy from the same mass of fuel as nuclear fission—is regarded by its proponents as a viable, eco-friendly alternative to gas-fired, coal-fired, and conventional power plants. Although the physics of nuclear fusion is essentially understood, the construction of prototype reactors currently presents significant technical challenges. Fusion Reactor Design: Plasma Physics, Fuel Cycle System, Operation and Maintenance provides a systematic, reader-friendly introduction to the characteristics, components, and critical systems of fusion reactors. Focusing on the experimental Tokamak reactor, this up-to-date resource covers relevant plasma physics, necessary technology, analysis methods, and the other aspects of fusion reactors. In-depth chapters include derivations of key formulas, figures highlighting physical and structural characteristics of fusion reactors, illustrative numerical calculations, practical design examples, and more. Designed to help researchers and engineers understand and overcome the technological difficulties in making fusion power a reality, this volume: Provides in-depth knowledge on controlled thermonuclear fusion and its large-scale application in both current fusion reactors and future test reactors Covers plasma analysis, plasma equilibrium and stability, and plasma transport and confinement, and safety considerations Explains each component of fusion reactors, including divertors, superconducting coils, plasma heating and current drive systems, and vacuum vessels Discusses safety aspects of fusion reactors as well as computational approaches to safety aspects of fusion reactors Fusion Reactor Design: Plasma Physics, Fuel Cycle System, Operation and Maintenance is required reading for undergraduate and graduate students studying plasma physics and fusion reactor technology, and an important reference for nuclear physicists, nuclear reactor manufacturers, and power engineers involved in fusion reactor research and advanced technology development.
Download or read book Fusion Reactor Design Problems written by and published by . This book was released on 1974 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FUSION REACTOR DESIGN PROBLEMS written by International Atomic Energy Agency and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Reactor Design written by Takashi Okazaki and published by John Wiley & Sons. This book was released on 2022-03-14 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion Reactor Design Provides a detailed overview of fusion reactor design, written by an international leader in the field Nuclear fusion—generating four times as much energy from the same mass of fuel as nuclear fission—is regarded by its proponents as a viable, eco-friendly alternative to gas-fired, coal-fired, and conventional power plants. Although the physics of nuclear fusion is essentially understood, the construction of prototype reactors currently presents significant technical challenges. Fusion Reactor Design: Plasma Physics, Fuel Cycle System, Operation and Maintenance provides a systematic, reader-friendly introduction to the characteristics, components, and critical systems of fusion reactors. Focusing on the experimental Tokamak reactor, this up-to-date resource covers relevant plasma physics, necessary technology, analysis methods, and the other aspects of fusion reactors. In-depth chapters include derivations of key formulas, figures highlighting physical and structural characteristics of fusion reactors, illustrative numerical calculations, practical design examples, and more. Designed to help researchers and engineers understand and overcome the technological difficulties in making fusion power a reality, this volume: Provides in-depth knowledge on controlled thermonuclear fusion and its large-scale application in both current fusion reactors and future test reactors Covers plasma analysis, plasma equilibrium and stability, and plasma transport and confinement, and safety considerations Explains each component of fusion reactors, including divertors, superconducting coils, plasma heating and current drive systems, and vacuum vessels Discusses safety aspects of fusion reactors as well as computational approaches to safety aspects of fusion reactors Fusion Reactor Design: Plasma Physics, Fuel Cycle System, Operation and Maintenance is required reading for undergraduate and graduate students studying plasma physics and fusion reactor technology, and an important reference for nuclear physicists, nuclear reactor manufacturers, and power engineers involved in fusion reactor research and advanced technology development.
Download or read book Fusion Reactor Design Problems written by and published by . This book was released on 1974 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Symposium on Thermonuclear Fusion Reactor Design written by Symposium on Thermonuclear Fusion Reactor Design (1970, Lubbock, Tex.) and published by . This book was released on 1970 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tokamak Start Up Problems and Scenarios Related to the Transient Phases of a Thermonuclear Fusion Reactor Ettor Majorana International Science Series written by Heinz Knoepfel and published by Springer. This book was released on 2013-12-19 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the Course on "Tokamak Startup - Problems and Scenarios Related to the Transient Phases of a Thermonuclear Fusion Reactor" which was held in Erice, July 14-20, 1985. The fact that the critical startup and transient phases of a tokamak reactor are now the specific subject of a comprehensive international gathering of fusion specialists seems indicative of the substantial pro gress made in recent years towards attaining controlled ignition of a nuclear fusion fuel, i.e. towards demonstrating the scientific feasibili ty of controlled thermonuclear fusion. In fact, the steady-state burning phase has attracted so far most of the attention of fusion physicists and engineers, as it is conceptually more rewarding, and theoretically easier to handle. However, as for many large engineering systems, - nuclear fis- ... ':1' " . 10 ' ... Entrance to San Rocco's lecturing hall v sion power plants, or aerospace crafts, for example - the major issues of design and operation lie often in the startup, shutdown and power tran sieQt phases, rather than at the full load, or at cruising regimes. In ehoosing the contributions to this 7th Course of Prof. B.
Download or read book Plasma Physics and Fusion Energy written by Jeffrey P. Freidberg and published by Cambridge University Press. This book was released on 2008-07-10 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been an increase in interest worldwide in fusion research over the last decade and a half due to the recognition that a large number of new, environmentally attractive, sustainable energy sources will be needed to meet ever increasing demand for electrical energy. Based on a series of course notes from graduate courses in plasma physics and fusion energy at MIT, the text begins with an overview of world energy needs, current methods of energy generation, and the potential role that fusion may play in the future. It covers energy issues such as the production of fusion power, power balance, the design of a simple fusion reactor and the basic plasma physics issues faced by the developers of fusion power. This book is suitable for graduate students and researchers working in applied physics and nuclear engineering. A large number of problems accumulated over two decades of teaching are included to aid understanding.
Download or read book Fusion Reactor Design Concepts written by International Atomic Energy Agency and published by . This book was released on 1978 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Energy Maturity Enrichment and fusion written by Rudolph Sher and published by Pergamon. This book was released on 1976 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unconventional Approaches to Fusion written by B. Brunelli and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Erice International School of Fusion Reactor Techno logy held its 1981 course on « Unconventional Approaches to Fusion » in combination with the IAEA Technical Committee meeting on « Critical Analysis of Alternative Fusion Concepts ». The two events took place in the second half of March with an overlap of a few days only. The present proceedings include the first week's papers; those presented during the second week will be summarised in Nuclear Fusion. Right from the beginning of the course, and in particular In R. Carruthers' opening talk, it was clear that an uncon ventional approach was considered stimulating insofar as its con ception presented advantageous aspects with respect to the To kamak. Indeed the Tokamak was recognized as an « imper fect frame of reference» (K. H. Schmitter) in the sense that, al though it deserves to be considered as a frame of reference for the other devices because it is the most advanced in the scientific demonstration of controlled thermonuclear fusion, as a fusion reactor, however, the Tokamak does not seem to be completely satisfactory either from an economic or from an operational point of view, if compared with that « enticing ogre », the proven fission reactor (less enticing to the public). Comparison of a Tokamak reactor with a PWR can be founded on considerations of such a basic nature that it becomes almost automatic to ask how far the various unconventional ap proaches to fusion are exempt from the Tokamak's drawbacks.
Download or read book Fundamentals of Magnetic Thermonuclear Reactor Design written by Vasilij A. Glukhikh and published by Woodhead Publishing. This book was released on 2018-05-21 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Magnetic Thermonuclear Reactor Design is a comprehensive resource on fusion technology and energy systems written by renowned scientists and engineers from the Russian nuclear industry. It brings together a wealth of invaluable experience and knowledge on controlled thermonuclear fusion (CTF) facilities with magnetic plasma confinement – from the first semi-commercial tokamak T-3, to the multi-billion international experimental thermonuclear reactor ITER, now in construction in France. As the INTOR and ITER projects have made an immense contribution in the past few decades, this book focuses on its practical engineering aspects and the basics of technical physics and electrical engineering. Users will gain an understanding of the key ratios between plasma and technical parameters, design streamlining algorithms and engineering solutions. - Written by a team of qualified experts who have been involved in the design of thermonuclear reactors for over 50 years - Outlines the most important features of the ITER project in France which is building the largest tokamak, including the design, material selection, safety and economic considerations - Includes data on how to design magnetic fusion reactors using CAD tools, along with relevant regulatory documents
Download or read book Tokamak Reactors for Breakeven written by H. Knoepfel and published by Elsevier. This book was released on 2013-10-08 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tokamak Reactors for Breakeven: A Critical Study of the Near-Term Fusion Reactor Program presents all possible aspects concerning the Tokamak line of research. This book examines the many significant implications of fusion research programs. Organized into five parts encompassing 29 chapters, this book begins with an overview of the mechanisms of anomalous loss in existing machines. This text then examines the environmental problems related to the use of large quantities of tritium. Other chapters consider the technology of superconducting Tokamak magnets, which provides challenging tasks both for specific developments in laboratories and hardware construction in industry. This book discusses as well the established program goal of the fusion program to develop and demonstrate pure fusion central electric power stations for commercial applications. The final chapter deals with the two types of reactors, namely, the liquid metal fast breeder reactors (LMFBR) and the high temperature reactors (HTR). This book is a valuable resource for scientists, engineers, and technologists.
Download or read book Nuclear Corrosion Science and Engineering written by Damien Feron and published by Elsevier. This book was released on 2012-02-21 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of nuclear materials, i.e. the interaction between these materials and their environments, is a major issue for plant safety as well as for operation and economic competitiveness. Understanding these corrosion mechanisms, the systems and materials they affect, and the methods to accurately measure their incidence is of critical importance to the nuclear industry. Combining assessment techniques and analytical models into this understanding allows operators to predict the service life of corrosion-affected nuclear plant materials, and to apply the most appropriate maintenance and mitigation options to ensure safe long term operation.This book critically reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities. Initial sections introduce the complex field of nuclear corrosion science, with detailed chapters on the different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them. This is complemented by reviews of monitoring and control methodologies, as well as modelling and lifetime prediction approaches. Given that corrosion is an applied science, the final sections review corrosion issues across the range of current and next-generation nuclear reactors, and across such nuclear applications as fuel reprocessing facilities, radioactive waste storage and geological disposal systems.With its distinguished editor and international team of expert contributors, Nuclear corrosion science and engineering is an invaluable reference for nuclear metallurgists, materials scientists and engineers, as well as nuclear facility operators, regulators and consultants, and researchers and academics in this field. - Comprehensively reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities - Chapters assess different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them - Considers monitoring and control methodologies, as well as modelling and lifetime prediction approaches
Download or read book The Fairy Tale of Nuclear Fusion written by L. J. Reinders and published by Springer Nature. This book was released on 2021-05-20 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This carefully researched book presents facts and arguments showing, beyond a doubt, that nuclear fusion power will not be technically feasible in time to satisfy the world's urgent need for climate-neutral energy. The author describes the 70-year history of nuclear fusion; the vain attempts to construct an energy-generating nuclear fusion power reactor, and shows that even in the most optimistic scenario nuclear fusion, in spite of the claims of its proponents, will not be able to make a sizable contribution to the energy mix in this century, whatever the outcome of ITER. This implies that fusion power will not be a factor in combating climate change, and that the race to save the climate with carbon-free energy will have been won or lost long before the first nuclear fusion power station comes on line. Aimed at the general public as well as those whose decisions directly affect energy policy, this book will be a valuable resource for informing future debates.
Download or read book Fusion Reactor Design Concepts written by International Atomic Energy Agency and published by . This book was released on 1978 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Code Development Incorporating Environmental Safety and Economic Aspects of Fusion Reactors FY 92 94 Final Report written by and published by . This book was released on 1994 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the Final Report for a three-year (FY 92--94) study of the Environmental, Safety, and Economic (ESE) aspects of fusion energy systems, emphasizing development of computerized approaches suitable for incorporation as modules in fusion system design codes. First, as is reported in Section 2, the authors now have operating a simplified but complete environment and safety evaluation code, BESAFE. The first tests of BESAFE as a module of the SUPERCODE, a design optimization systems code at LLNL, are reported in Section 3. Secondly, as reported in Section 4, the authors have maintained a strong effort in developing fast calculational schemes for activation inventory evaluation. In addition to these major accomplishments, considerable progress has been made on research on specific topics as follows. A tritium modeling code TRIDYN was developed in collaboration with the TSTA group at LANL and the Fusion Nuclear Technology group at UCLA. A simplified algorithm has been derived to calculate the transient temperature profiles in the blanket during accidents. The scheme solves iteratively a system of non-linear ordinary differential equations describing about 10 regions of the blanket by preserving energy balance. The authors have studied the physics and engineering aspects of divertor modeling for safety applications. Several modifications in the automation and characterization of environmental and safety indices have been made. They have applied this work to the environmental and safety comparisons of stainless steel with alternative structural materials for fusion reactors. A methodology in decision analysis utilizing influence and decision diagrams has been developed to model fusion reactor design problems. Most of the work during this funding period has been reported in 26 publications including theses, journal publications, conference papers, and technical reports, as listed in Section 11.
