Download or read book Furnace Tapping 2022 written by Joalet D. Steenkamp and published by Springer Nature. This book was released on 2022-02-03 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: No pyrometallurgical smelter can operate without some form of tapping system. It is the one thing all smelters have in common. This collection discusses this meeting point of the science, technology, and skill involved in this process. The tap-hole design process includes a set of design criteria, which need to be revised as the results of laboratory, computational fluid dynamics (CFD), and time-and-motion studies become available. The tap-hole life cycle is considered in this volume, with authors addressing the requirements for installation and operability as well as for maintenance. Matters such as online monitoring of the tap-hole wear, handling of liquid products, and extraction of fumes are all discussed. Although much has been done to make the tapping process as automatic as possible, tapping of smelters cannot be done without labor. Tap floor operators work in harsh environments where safety is of utmost importance. Selection of suitable personnel and intensive training is required and is discussed in this collection.
Download or read book Blast Furnace Tapping written by and published by . This book was released on 1977 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Furnace Tapping written by Steel Industry Safety and Health Commission and published by . This book was released on 1977 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Pyrometallurgy written by Camille Fleuriault and published by Springer Nature. This book was released on 2023-02-11 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon intensive industries are at a crossroads. Long-term manufacturing plans using pyrometallurgical processes all include decarbonization levers: we must solve the problem of fossil-based reduction and fossil-based power generation processes for metals production. This collection explores innovative and diverse strategies for the enablement of low carbon industries in the high-temperature metals and materials processing fields. In particular, the following processes are investigated: · Electrolysis and electrification of metallurgical processes · High-temperature electrolytic routes for metal and alloy production · Use of hydrogen and other alternative non-carbonaceous reducing agents · Biofuels and other non-fossil reagents for metallurgical applications · Direct and indirect use of solar energy in high-temperature processing · Energy efficiency and waste heat recovery concepts applied to pyrometallurgical operations
Download or read book Magnesium Technology 2022 written by Petra Maier and published by Springer Nature. This book was released on 2022-02-05 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium at the TMS Annual Meeting & Exhibition is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications and recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2022 is a definitive reference that covers a broad spectrum of current topics, including novel extraction techniques; primary production; alloys and their production; integrated computational materials engineering; thermodynamics and kinetics; plasticity mechanisms; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; fatigue and fracture; dynamic response; structural applications; degradation and biomedical applications; emerging applications; additive manufacturing of powders; and recycling, ecological issues, and life cycle analysis.
Download or read book Proceedings of the 61st Conference of Metallurgists COM 2022 written by Metallurgy & Materials Soc. of CIM and published by Springer Nature. This book was released on 2023-01-05 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings represent the metallurgical engineering and materials science research presented at the 61st Annual Conference of Metallurgists. The collection themed ‘The Pathway to Net-Zero’ presents findings on a wide range of topics including: Processing of Critical Materials Towards Sustainable Circularity: Mining to Materials Deep Decarbonization Pathways for Pyrometallurgical Processes: Opportunities & Challenges Energy and Environmental Materials Light Metals for the Transportation Industry Advances in Materials Manufacturing VI – Existing and Emerging Materials Electrochemical Degradation of Multi-component Materials
Download or read book Treatise on Process Metallurgy written by Roderick Guthrie and published by Elsevier. This book was released on 2024-03-12 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Process Metallurgy: Volume Three, Industrial Processes provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board. Provides the entire breadth of process metallurgy in a single work Includes in-depth knowledge in all key areas of process metallurgy Approaches the topic from an interdisciplinary perspective, providing broad range coverage on topics
Download or read book The 6th Mechanical Engineering Science and Technology MEST 2022 International Conference written by Taurista Perdana Syawitri and published by Springer Nature. This book was released on 2023-04-16 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. MEST2022 invites all potential authors from universities and various organisations to submit papers in the area of mechanical, manufacturing, materials sciences and related interdisciplinary engineering fields. This conference is part of a conference program called International Summit on Science Technology and Humanity (ISETH) 2022 Organized by Universitas Muhammadiyah Surakarta. The 6th Mechanical Engineering, Science and Technology (MEST2022) International conference is an annual the Mechanical Department of Universitas Muhammadiyah Surakarta event. All possible writers from universities and other organizations are invited to submit papers. The conference is a forum for academic exchange that provides a prompt presentation of articles on experimental, numerical, and theoretical studies that shed light on the critical topics of mechanical, thermal, fluid, and aerothermodynamics internal flow, heat and mass transfer, multiphase flow, turbulence modelling, combustion, engineering thermodynamics, thermophysical properties of matter, measurement, and visualization techniques. Contributions range from intriguing and significant research immediately applicable to industry development or practice to high-level student textbooks, explanations, distribution of technology, and good practice.
Download or read book Light Metals 2022 written by Dmitry Eskin and published by Springer Nature. This book was released on 2022-02-05 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2022 collection includes contributions from the following symposia: • Alumina and Bauxite • Aluminum Alloys, Processing and Characterization • Aluminum Reduction Technology • Aluminum Reduction Technology Joint Session with REWAS: Decarbonizing the Metals Industry • Cast Shop Technology • Electrode Technology for Aluminum Production • Primary Aluminum Industry—Energy and Emission Reductions: An LMD Symposium in Honor of Halvor Kvande • Recycling and Sustainability in Cast Shop Technology: Joint Session with REWAS 2022
Download or read book 12th International Symposium on High Temperature Metallurgical Processing written by Zhiwei Peng and published by Springer Nature. This book was released on 2022-02-04 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection includes the analysis, development, and operation of high-temperature processes that involve the extraction and processing of material resources, production, and treatment of metals, alloys, and ceramic materials. Contributions describe innovative methods for achieving property enhancement, impurity segregation and removal, byproduct recovery, waste minimization, energy efficiency, and utilization of complex ores. Also included are various technical, economic, and environmental issues associated with commercial-scale high-temperature processing methods.
Download or read book Theory and Practice of CO2 Utilization in Steelmaking written by Rong Zhu and published by Springer Nature. This book was released on 2022-09-12 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes the mechanism of the application of CO2 in steelmaking, by looking at the thermodynamics and kinetics of the reactions of CO2 with the elements present in molten steel. This book is the first academic monograph either at home or abroad on the application of CO2 in the steelmaking field. The thermodynamic conditions of the reactions of CO2 with silicon, manganese, phosphorus, chromium, nickel, vanadium, and other elements were calculated and analyzed using the FactSage thermodynamic software, and the selective oxidation law of the above multiple elements by CO2 was also analyzed. In terms of kinetics, the interfacial reaction mechanism of CO2 was analyzed via gas isotope exchange technology, and the O2 transfer process and transfer rate between the CO2, slag, and steel were studied. In terms of materials and energy balance, how to use the high-temperature characteristics of CO2 to control the temperature of the molten pool, improve the reaction conditions of molten iron, reduce the evaporation of molten iron, and reduce the amount of steelmaking dust were introduced. Based on the experimental data, theoretical models of unit operation for the application of CO2 in steelmaking were established, including decarburization, denitrification, dephosphorization, decarburization and chromium retention, vanadium extraction, and carbon preservation, and these theoretical models were applied to the steelmaking production process, which is an important step in going from theory to practice. The above research work has opened up a new solution for energy saving and liquid steel cleaning in the iron and steel production process and represents progress in steelmaking technology. This book is used as a reference book for managers, engineering and technical personnel, and related professional teachers and students of Iron & Steel enterprises, government departments, consulting services and evaluation agencies, colleges, and secondary professional schools.
Download or read book Modern Copper Smelting written by Donald M. Levy and published by DigiCat. This book was released on 2022-06-03 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Modern Copper Smelting" is a book that contains the teachings of Donald M. Levy at the University of Birmingham. It contains the study of practices of some of the most significant copper-smelting works in America. This book also contains the advancement of copper metallurgy contained in recent technical literature and some of his experiences.
Download or read book Energy Audit and Management written by L. Ashok Kumar and published by CRC Press. This book was released on 2022-12-30 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the energy management concepts, energy audit principles, resource efficiency, and other energy conservation opportunities involved in different sectors across varied industries. Real-time case studies from various large industrial sectors, like cement, paper and pulp, refineries, manufacturing, garments and textile processing, power plants, and other MSME industrial sectors with cross functional energy conservation opportunities, are included. It also describes the future scope of energy auditing and management including IoT and data analytics. It also helps to gather the energy generated and utilization, energy conservation, and other process related data. Features: Provides entire coverage of energy management and audit concepts Explores energy audit methodologies and energy saving initiatives Incorporates current technologies like machine learning, IoT, data analytics in energy audit for reliability improvement Includes case studies covering detailed energy saving calculation with investment pay back calculations This book is aimed at researchers, professionals, and graduate students in electrical engineering, power systems, energy systems, and renewable energy.
Download or read book Down the Bright Stream The Prehistory of Woodcock Corner and the Tregurra Valley Cornwall written by Sean R. Taylor and published by Archaeopress Publishing Ltd. This book was released on 2022-06-23 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reports on a series of fieldwork projects carried out in the Tregurra Valley, to the east of Truro, Cornwall between 2009-2015. The fieldwork led to the identification of a large number of pits and hearths across the site, the majority of which that have proved dateable spanning the Early Neolithic to the end of the Early Bronze Age.
Download or read book REWAS 2022 Developing Tomorrow s Technical Cycles Volume I written by Adamantia Lazou and published by Springer Nature. This book was released on 2022-02-02 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 7th installment of the REWAS conference series held at the TMS Annual Meeting& Exhibition focuses on developing tomorrow’s technical cycles. The papers in thiscollection explore the latest technical and societal developments enabling sustainabilitywithin our global economy with an emphasis on recycling and waste management. The2022 collection includes contributions from the following symposia: • Coupling Metallurgy and Sustainability: An EPD Symposium in Honor of Diran Apelian• Recovering the Unrecoverable• Sustainable Production and Development Perspectives• Automation and Digitalization for Advanced Manufacturing• Decarbonizing the Materials Industry
Download or read book Marine Boiler Management and Construction written by C.E. Stromeyer and published by BoD – Books on Demand. This book was released on 2022-12-03 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reprint of the original, first published in 1893.
Download or read book Smart Manufacturing written by Anthony Tarantino and published by John Wiley & Sons. This book was released on 2022-05-24 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the dramatic changes brought on by the new manufacturing technologies of Industry 4.0 In Smart Manufacturing, The Lean Six Sigma Way, Dr. Anthony Tarantino delivers an insightful and eye-opening exploration of the ways the Fourth Industrial Revolution is dramatically changing the way we manufacture products across the world and especially how it will revitalize manufacturing in North America and Europe. The author examines the role and impact of a variety of new Smart technologies including industrial IoT, computer vision, mobile/edge computing, 3D printing, robots, big data analytics, and the cloud. He demonstrates how to apply these new technologies to over 20 continuous improvement/Lean Six Sigma tools, greatly enhancing their effectiveness and ease of use. The book also discusses the role Smart technologies will play in improving: Career opportunities for women in manufacturing Cyber security, supply chain risk, and logistics resiliency Workplace health, safety, and security Life on the manufacturing floor Operational efficiencies and customer satisfaction Perfect for anyone involved in the manufacturing or distribution of products in the 21st century, Smart Manufacturing, The Lean Six Sigma Way belongs in the libraries of anyone interested in the intersection of technology, commerce, and physical manufacturing.