Download or read book Sintering of Advanced Materials written by Zhigang Zak Fang and published by Elsevier. This book was released on 2010-09-27 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is a method for manufacturing components from ceramic or metal powders by heating the powder until the particles adhere to form the component required. The resulting products are characterised by an enhanced density and strength, and are used in a wide range of industries. Sintering of advanced materials: fundamentals and processes reviews important developments in this technology and its applicationsPart one discusses the fundamentals of sintering with chapters on topics such as the thermodynamics of sintering, kinetics and mechanisms of densification, the kinetics of microstructural change and liquid phase sintering. Part two reviews advanced sintering processes including atmospheric sintering, vacuum sintering, microwave sintering, field/current assisted sintering and photonic sintering. Finally, Part three covers sintering of aluminium, titanium and their alloys, refractory metals, ultrahard materials, thin films, ultrafine and nanosized particles for advanced materials.With its distinguished editor and international team of contributors, Sintering of advanced materials: fundamentals and processes reviews the latest advances in sintering and is a standard reference for researchers and engineers involved in the processing of ceramics, powder metallurgy, net-shape manufacturing and those using advanced materials in such sectors as electronics, automotive and aerospace engineering. - Explores the thermodynamics of sintering including sinter bonding and densification - Chapters review a variety of sintering methods including atmosphere, vacuum, liquid phase and microwave sintering - Discusses sintering of a variety of materials featuring refractory metals, super hard materials and functionally graded materials

Download or read book Spark Plasma Sintering of Materials written by Pasquale Cavaliere and published by Springer. This book was released on 2019-02-18 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes spark plasma sintering (SPS) in depth. It addresses fundamentals and material-specific considerations, techniques, and applications across a broad spectrum of materials. The book highlights methods used to consolidate metallic or ceramic particles in very short times. It highlights the production of complex alloys and metal matrix composites with enhanced mechanical and wear properties. Emphasis is placed on the speed of the sintering processes, uniformity in product microstructure and properties, reduced grain growth, the compaction and sintering of materials in one processing step, various materials processing, and high energy efficiency. Current and potential applications in space science and aeronautics, automation, mechanical engineering, and biomedicine are addressed throughout the book.

Download or read book Sintering written by Suk-Joong L. Kang and published by Elsevier. This book was released on 2004-11-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is the process of forming materials and components from a powder under the action of thermal energy. It is a key materials science subject: most ceramic materials and many specialist metal powder products for use in key industries such as electronics, automotive and aerospace are formed this way. Written by one of the leading experts in the field, this book offers an unrivalled introduction to sintering and sintering processes for students of materials science and engineering, and practicing engineers in industry. The book is unique in providing a complete grounding in the principles of sintering and equal coverage of the three key sintering processes: densification, grain growth and microstructure. Students and professional engineers alike will be attracted by the emphasis on developing a detailed understanding of the theory and practical processes of sintering, the balanced coverage of ceramic and metal sintering, and the accompanying examination questions with selected solutions. - Delivering unrivalled depth of coverage on the basis of sintering, science, including thermodynamics and polycrystalline microstructure. - Unique in its balanced coverage of the three key sintering elements - densification, grain growth and microstructure. - A key reference for students and engineers in materials science and engineering, accompanied by examination questions and selected solutions.

Download or read book Sintering Technology written by Randall M. German and published by CRC Press. This book was released on 2020-09-30 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the sintering conference held at the Pennsylvania State University, USA, this text presents advances in the application of sintering to the most important industrial materials. It offers results on both solid-state and microphase sintering as well as microstructure evolution, and introduces new applications, processes, materials and solutions to technical problems.

Download or read book Sintering Theory and Practice written by Randall M. German and published by Wiley-Interscience. This book was released on 1996-01-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although sintering is an essential process in the manufacture ofceramics and certain metals, as well as several other industrialoperations, until now, no single book has treated both thebackground theory and the practical application of this complex andoften delicate procedure. In Sintering Theory and Practice, leadingresearcher and materials engineer Randall M. German presents acomprehensive treatment of this subject that will be of great useto manufacturers and scientists alike. This practical guide to sintering considers the fact that while thebonding process improves strength and other engineering propertiesof the compacted material, inappropriate methods of control maylead to cracking, distortion, and other defects. It provides aworking knowledge of sintering, and shows how to avoid problemswhile accounting for variables such as particle size, maximumtemperature, time at that temperature, and other problems that maycause changes in processing. The book describes the fundamental atomic events that govern thetransformation from particles to solid, covers all forms of thesintering process, and provides a summary of many actual productioncycles. Building from the ground up, it begins with definitions andprogresses to measurement techniques, easing the transition,especially for students, into advanced topics such as single-phasesolid-state sintering, microstructure changes, the complications ofmixed particles, and pressure-assisted sintering. German draws onsome six thousand references to provide a coherent and lucidtreatment of the subject, making scientific principles andpractical applications accessible to both students andprofessionals. In the process, he also points out and avoids thepitfalls found in various competing theories, concepts, andmathematical disputes within the field. A unique opportunity to discover what sintering is all about--bothin theory and in practice What is sintering? We see the end product of this thermal processall around us--in manufactured objects from metals, ceramics,polymers, and many compounds. From a vast professional literature,Sintering Theory and Practice emerges as the only comprehensive,systematic, and self-contained volume on the subject. Covering all aspects of sintering as a processing topic, includingmaterials, processes, theories, and the overall state of the art,the book * Offers numerous examples, illustrations, and tables that detailactual processing cycles, and that stress existing knowledge in thefield * Uses the specifics of various consolidation cycles to illustratethe basics * Leads the reader from the fundamentals to advanced topics,without getting bogged down in various mathematical disputes overtreatments and measurements * Supports the discussion with critically selected references fromthousands of sources * Examines the sintering behavior of a wide variety of engineeredmaterials--metals, alloys, oxide ceramics, composites, carbides,intermetallics, glasses, and polymers * Guides the reader through the sintering processes for severalimportant industrial materials and demonstrates how to controlthese processes effectively and improve present techniques * Provides a helpful reference for specific information onmaterials, processing problems, and concepts For practitioners and researchers in ceramics, powder metallurgy,and other areas, and for students and faculty in materials scienceand engineering, this book provides the know-how and understandingcrucial to many industrial operations, offers many ideas forfurther research, and suggests future applications of thisimportant technology. This book offers an unprecedented opportunity to explore sinteringin both practical and theoretical terms, whether at the lab or inreal-world applications, and to acquire a broad, yet thorough,understanding of this important technology.

Download or read book Sintering of Ceramics written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2007-07-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering of Ceramics provides the only comprehensive treatment of the theories and principles of sintering and their application to the production of advanced ceramics with the required target microstructure. Stemming from the author's bestselling text, Ceramic Processing and Sintering, this book includes additional material selected

Download or read book Fundamentals of Ceramics written by Michel Barsoum and published by CRC Press. This book was released on 2002-11-27 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and improved, this revised edition of Michel Barsoum's classic text Fundamentals of Ceramics presents readers with an exceptionally clear and comprehensive introduction to ceramic science. Barsoum offers introductory coverage of ceramics, their structures, and properties, with a distinct emphasis on solid state physics and chemistry. Key equations are derived from first principles to ensure a thorough understanding of the concepts involved. The book divides naturally into two parts. Chapters 1 to 9 consider bonding in ceramics and their resultant physical structures, and the electrical, thermal, and other properties that are dependent on bonding type. The second part (Chapters 11 to 16) deals with those factors that are determined by microstructure, such as fracture and fatigue, and thermal, dielectric, magnetic, and optical properties. Linking the two sections is Chapter 10, which describes sintering, grain growth, and the development of microstructure. Fundamentals of Ceramics is ideally suited to senior undergraduate and graduate students of materials science and engineering and related subjects.

Download or read book Sintering Fundamentals written by G.S. Upadhyaya and published by Trans Tech Publications Ltd. This book was released on 2009-06-11 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). This book comprises state-of-the–art reviews written by acknowledged experts who are active in sintering science. It includes seven invited reviews by authors hailing from five countries: J-M.Chaix (France) discusses quantitative aspects of the microstructures and modeling of sintering; with the technical aspects of image-analysis - including that of nanostructured materials - adding extra value. Z.S. Nikolic (Serbia) provides a theoretical review of the simulation of liquid-phase sintering, particularly under microgravity conditions, and extensively and critically reviews the results reported in the sintering literature. A.L. Lisovsky (Ukraine) opens up the vista of deconsolidation of polycrystalline skeletons in sintered composite materials, and deals with systems having more than one refractory solid phase, and with nanodispersed composite materials. G.S. Upadhyaya ( India) reviews the Samsonov model for the electronic mechanism of sintering, and its relevance; pointing out that, although the model is a qualitative one, it has great utility as a predictive tool and that various case-studies drawn from real multi-phase material systems are a testimony to the value of Samsonov’s model.

Download or read book Ceramics and Composites Processing Methods written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the latest processing and fabrication methods There is increasing interest in the application of advanced ceramic materials in diverse areas such as transportation, energy, environmental protection and remediation, communications, health, and aerospace. This book guides readers through a broad selection of key processing techniques for ceramics and their composites, enabling them to manufacture ceramic products and components with the properties needed for various industrial applications. With chapters contributed by internationally recognized experts in the field of ceramics, the book includes traditional fabrication routes as well as new and emerging approaches in order to meet the increasing demand for more reliable ceramic materials. Ceramics and Composites Processing Methods is divided into three sections: * Densification, covering the fundamentals and practice of sintering, pulsed electric current sintering, and viscous phase silicate processing * Chemical Methods, examining colloidal methods, sol-gel, gel casting, polymer processing, chemical vapor deposition, chemical vapor infiltration, reactive melt infiltration, and combustion synthesis * Physical Methods, including directional solidification, solid free-form fabrication, microwave processing, electrophoretic deposition, and plasma spraying Each chapter focuses on a particular processing method or approach. Collectively, these chapters offer readers comprehensive, state-of-the-science information on the many approaches, techniques, and methods for the processing and fabrication of advanced ceramics and ceramic composites. With its coverage of the latest processing methods, Ceramics and Composites Processing Methods is recommended for researchers and students in ceramics, materials science, structural materials, biomedical engineering, and nanotechnology.

Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.

Download or read book Field Assisted Sintering written by Eugene A. Olevsky and published by Springer. This book was released on 2018-08-09 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first ever scientific monograph including an in-depth analysis of all major field-assisted sintering techniques. Until now, the electromagnetic field-assisted technologies of materials processing were lacking a systematic and generalized description in one fundamental publication; this work promotes the development of generalized concepts and of comparative analyses in this emerging area of materials fabrication. This book describes modern technologies for the powder processing-based fabrication of advanced materials. New approaches for the development of well-tailored and stable structures are thoroughly discussed. Since the potential of traditional thermo-mechanical methods of material treatment is limited due to inadequate control during processing, the book addresses ways to more accurately control the resultant material's structure and properties by an assisting application of electro-magnetic fields. The book describes resistance sintering, high-voltage consolidation, sintering by low-voltage electric pulses (including spark plasma sintering), flash sintering, microwave sintering, induction heating sintering, magnetic pulse compaction and other field-assisted sintering techniques. Includes an in-depth analysis of all major field-assisted sintering techniques; Explains new techniques and approaches for material treatment; Provides detailed descriptions of spark plasma sintering, microwave sintering, high-voltage consolidation, magnetic pulse compaction, and various other approaches when field-assisted treatment is applied.

Download or read book Fundamentals of Ceramic Powder Processing and Synthesis written by Terry A. Ring and published by Elsevier. This book was released on 1996-04-30 with total page 985 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic powder synthesis and processing are two of the most important technologies in chemical engineering and the ceramics-related area of materials science. This book covers both the processing and the synthesis ofceramic powders in great depth and is indeed the only up-to-date, comprehensive source on the subject available.The application of modern scientific and engineering methods to the field of ceramic powder synthesis has resulted in much greater control of properties. Fundamentals of Ceramic Powder Processing and Synthesis presents examples of these modern methods as they apply to ceramic powders. The book is organized to describe the natural and synthetic raw materials that comprise contemporary ceramics. It covers the three reactant processes used in synthetic ceramic powder synthesis: solid, liquid, andgas.Ceramic powder processing, as a field of materials processing, is undergoing rapid expansion. The present volume is intended as a complete and useful source on this subject of great current interest. It provides comprehensive coverage from a strong chemistry and chemical engineering perspective and is especially applicable to materials scientists, chemical engineers, and applied chemists.Key Features* The most complete and updated reference source on the subject* Comprehensive coverage from a stron chemical engineering and chemistry perspective* Emphasis on both natural and synthetic raw materials in ceramic powder synthesis* Information on reaction kinetics* Superior, more comprehensive coverage than that in existing texts* Sample problems and exercises* Problems at the end of each chapter which supplement the material

Download or read book Science of Sintering written by H. Palmour III and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, SCIENCE OF SINTERING: NEW DIRECTIONS FOR MATERIALS PROCESSING AND MICROSTRUCTURAL CONTROL, contains the edited Proceedings of the Seventh World Round Table Conference on Sintering, held in Herceg-Novi, Yugoslavia, Aug. 28 - Sept. 1, 1989. It was organized by the International Institute for the Science of Sintering (IISS), headquartered in Belgrade, Yugoslavia. Every fourth year since 1969, the Institute has organized such a Round Table Conference on Sintering; each has taken place at some selected location within Yugoslavia. A separate series of IISS Topical Sintering Symposia (Summer Schools) have also been held at four year intervals, but they have been offset by about two years, so they occur between the main Conferences. As a rule, the Topical Sintering Symposia have been devoted to more specific topics and they also take place in different countries. The aim of these Conferences and their related "Summer Schools" has been to bring together scientists from all over the world who work in various fields of science and technology concerned with sintering and sintered materials. A total of seven IISS Conferences have been held over the period 1969-1989, and they have been supplemented by the four Topical Sintering Symposia held in Yugoslavia, Poland, India and Japan (in 1975, 1979, 1983 and 1987, respectively). This most recent five day Conference addressed the fundamental scientific background as well as the technological state-of-the-art pertinent to science of sintering and high technology sintered materials.

Download or read book Ceramic Processing written by Mohamed Rahaman and published by CRC Press. This book was released on 2006-08-07 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.

Download or read book Sintering and Plastic Deformation written by L. J. Bonish and published by Springer. This book was released on 2013-12-19 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ceramic Materials written by Philippe Boch and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily an introduction to the vast family of ceramic materials. The first part is devoted to the basics of ceramics and processes: raw materials, powders synthesis, shaping and sintering. It discusses traditional ceramics as well as “technical” ceramics – both oxide and non-oxide – which have multiple developments. The second part focuses on properties and applications, and discusses both structural and functional ceramics, including bioceramics. The fields of abrasion, cutting and tribology illustrate the importance of mechanical properties. It also deals with the questions/answers of a ceramicist regarding electronuclear technology. As chemistry is an essential discipline for ceramicists, the book shows, in particular, what soft chemistry can contribute as a result of sol-gel methods.

Download or read book Sintering written by Ricardo Castro and published by Springer Science & Business Media. This book was released on 2012-09-09 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering process studies have re-emerged strongly in the past decade due to extensive discussions about the stabilization of nanoparticles and nanostructures, and the development of controlled nanograined bulk materials. This book presents the state-of-art in experiments and theory of novel sintering processes, traditional sintering and grain growth. The scope ranges from powder metallurgy to ceramic and composites processing. The challenges of conventional and novel sintering and grain growth in nanopowders and nanostructures are addressed, being useful for students as well as professionals interested in sintering at the nanoscale.