Download or read book Fundamentals of Nanoindentation and Nanotribology IV Volume 1049 written by Materials Research Society. Meeting and published by . This book was released on 2008-05-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners. This book is a snapshot of the state of the art in nanoindentation and nanotribology, and highlights emerging topics including the development of new methods for characterizing nanoscale mechanical and tribological properties.
Download or read book Fundamentals of Nanoindentation and Nanotribology IV written by Eric Le Bourhis and published by Cambridge University Press. This book was released on 2014-06-05 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoindentation and nanotribology are fundamental, evolving, and complementary disciplines within materials science. In recent years there has been rapid convergence of the biomechanical and materials disciplines, as well as explosive growth of the nanotube and nanostructured materials fields. The expansion of nanomechanical testing into these new fields has been accompanied by similarly rapid growth in our understanding of, and ability to perform, mechanical tests with ever-smaller forces and displacements. The understanding of fundamental mechanical measurement techniques must continue to advance to design new systems and materials to meet the challenges of technology. This book is a snapshot of the state of the art in nanoindentation and nanotribology, and highlights emerging topics including the development of new methods for characterizing nanoscale mechanical and tribological properties. Additional topics include: size effects and indentation of thin films; nanotribology and friction; modeling, simulation and analysis of indentation data and nanomechanics of polymers, time-dependent characterization.
Download or read book Fundamentals of Nanoindentation and Nanotribology written by and published by . This book was released on 2004 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Nanoindentation and Nanotribology written by and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Nanoindentation and Nanotribology written by and published by . This book was released on 1998 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Nanoindentation and Nanotribology II written by Shefford P. Baker and published by . This book was released on 2001 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Nanoindentation and Nanotribology written by and published by . This book was released on 1998 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Nanoindentation and Nanotribology III written by Kathryn J. Wahl and published by . This book was released on 2005 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on methods to measures and model small-volume mechanical and tribological properties. Nanoscale characterization of the mechanical and tribological properties of surfaces is important in many engineering applications.
Download or read book Fundamentals of Nanoindentation and Nanotribology IV Volume 1049 written by Eric Le Bourhis and published by Cambridge University Press. This book was released on 2008-05-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoindentation and nanotribology are fundamental, evolving, and complementary disciplines within materials science. In recent years there has been rapid convergence of the biomechanical and materials disciplines, as well as explosive growth of the nanotube and nanostructured materials fields. The expansion of nanomechanical testing into these new fields has been accompanied by similarly rapid growth in our understanding of, and ability to perform, mechanical tests with ever-smaller forces and displacements. The understanding of fundamental mechanical measurement techniques must continue to advance to design new systems and materials to meet the challenges of technology. This book is a snapshot of the state of the art in nanoindentation and nanotribology, and highlights emerging topics including the development of new methods for characterizing nanoscale mechanical and tribological properties. Additional topics include: size effects and indentation of thin films; nanotribology and friction; modeling, simulation and analysis of indentation data and nanomechanics of polymers, time-dependent characterization.
Download or read book Experimental Mechanics written by Emmanuel E. Gdoutos and published by Springer Nature. This book was released on 2021-11-15 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents in a clear, simple, straightforward, novel and unified manner the most used methods of experimental mechanics of solids for the determination of displacements, strains and stresses. Emphasis is given on the principles of operation of the various methods, not in their applications to engineering problems. The book is divided into sixteen chapters which include strain gages, basic optics, geometric and interferometric moiré, optical methods (photoelasticity, interferometry, holography, caustics, speckle methods, digital image correlation), thermoelastic stress analysis, indentation, optical fibers, nondestructive testing, and residual stresses. The book will be used not only as a learning tool, but as a basis on which the researcher, the engineer, the experimentalist, the student can develop their new own ideas to promote research in experimental mechanics of solids.
Download or read book Mechanical Testing of Materials written by Emmanuel Gdoutos and published by Springer Nature. This book was released on 2024-01-19 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and in-depth exploration of the most widely used test methods for characterizing the deformation and failure behavior of materials. It presents a thorough treatise on mechanical testing, providing a valuable resource for researchers, engineers, and students seeking to understand the mechanical properties and performance of materials across various applications. The book is organized into ten chapters dedicated to specific test methods including tensile, compression, bending, torsion, multiaxial, indentation, fracture, fatigue, creep, high strain rates, nondestructive evaluation, ensuring a thorough examination of each technique's principles, procedures, and applications. It features two special chapters focusing specifically on the mechanical characterization of concrete and fiber composite materials. These chapters delve into the unique aspects and challenges associated with testing and analyzing these specific materials.
Download or read book Experimental and Applied Mechanics Volume 4 written by Yong Zhu and published by Springer. This book was released on 2016-09-16 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of ten from the Conference, brings together contributions to important areas of research and engineering. The collection presents early findings and case studies on a wide range of topics, including: Hybrid Experimental & Computational Techniques Advanced Experimental Mechanics Methods Integration of Models & Experiments Soft Materials Education & Research in Progress Applications
Download or read book Micro and Nanoscale Phenomena in Tribology written by Yip-Wah Chung and published by CRC Press. This book was released on 2011-10-19 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from presentations at a recent National Science Foundation Summer Institute on Nanomechanics, Nanomaterials, and Micro/Nanomanufacturing, Micro- and Nanoscale Phenomena in Tribology explores the convergence of the multiple science and engineering disciplines involved in tribology and the connection from the macro to nano world. Written by specialists from computation, materials science, mechanical engineering, surface physics, and chemistry, each chapter provides up-to-date coverage of both basic and advanced topics and includes extensive references for further study. After discussing the evolution of tribology in the micro and nano world, the book describes contact conditions spanning between macroscale and nanoscale contacts. It presents an overview of fundamental continuum treatments of interfacial contact and lubrication under a wide range of conditions, including novel advances in contact simulation. It also gives a thorough account of the nature of surface energies and forces in nanostructures as well as adhesion in dry and wet environments. The book then explains how to perform friction measurements at the nanoscale and interpret friction data before demonstrating how micro- and nanotextured surfaces affect adhesion, friction, and wetting. The final chapters emphasize the importance of surface chemistry and molecular dynamics simulation in tribology. With numerous examples and figures throughout, this volume presents a thorough account of important advancements in tribology that offer insight into micro- and nanoscale phenomena. By enabling a better understanding of fundamental micro- and nanoscale interactions, the book helps readers effectively design and fabricate durable tribological components for various engineering and biological systems.
Download or read book Polymer Tribology written by Sujeet K. Sinha and published by World Scientific. This book was released on 2009 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the new and now-expanding field of friction, wear, and other surface-related mechanical phenomena for polymers. Polymers have been used in various forms such as bulk, films, and composites in applications where their friction, wear resistance, and other surface-related properties have been effectively utilized. There are also many examples in which polymers have performed extremely well, such as in tyres, shoes, brakes, gears, bearings, small moving parts in electronics and MEMS, cosmetics/hair products, and artificial human joints. Around the world, much research is currently being undertaken to develop new polymers, in different forms, for further enhancing tribological performance and for finding novel applications. Keeping in view the importance of tribology of polymers for research and technology as well as the vast literature that is now available in research papers and review articles, this timely book brings together a wealth of research data for an understanding of the basic principles of the subject.
Download or read book III V and IV IV Materials and Processing Challenges for Highly Integrated Microelectronics and Optoelectronics Volume 535 written by S. A. Ringel and published by . This book was released on 1999-08-11 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of two symposia - 'Integration of Dissimilar Materials in Micro- and Optoelectronics' and 'III-V and SiGe Group IV Device/IC Processing Challenges for Commercial Applications'. The publication stems from the desire to achieve new levels of device functionality and higher levels of performance via integration of devices based on dissimilar semiconductors, where the constraint of lattice-matching on the breadth of attainable devices can be reduced. It covers fundamental topics germane to integration of a wide range of dissimilar materials spanning wide-bandgap III-V nitrides, III-V/Si integration, II-VI and II-VI/III-V compounds, heterovalent structures, oxides, photonic bandgap structures and others. Topics such as compliancy, dislocation control, selective area growth, bonding methodologies, etc. are featured. It also addresses processing issues in the manufacturing of III-V and Si-based heterostructures for commercial products. Here, the success enjoyed by silicon germanium technology is contrasted by the promise of silicon-carbon alloys which have opportunities and challenges for the new generation of process developers.
Download or read book Review of Instrumented Indentation written by and published by DIANE Publishing. This book was released on with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanomechanical Analysis of High Performance Materials written by Atul Tiwari and published by Springer Science & Business Media. This book was released on 2013-08-13 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for researchers who are interested in investigating the nanomechanical properties of materials using advanced instrumentation techniques. The chapters of the book are written in an easy-to-follow format, just like solved examples. The book comprehensively covers a broad range of materials such as polymers, ceramics, hybrids, biomaterials, metal oxides, nanoparticles, minerals, carbon nanotubes and welded joints. Each chapter describes the application of techniques on the selected material and also mentions the methodology adopted for the extraction of information from the raw data. This is a unique book in which both equipment manufacturers and equipment users have contributed chapters. Novices will learn the techniques directly from the inventors and senior researchers will gain in-depth information on the new technologies that are suitable for advanced analysis. On the one hand, fundamental concepts that are needed to understand the nanomechanical behavior of materials is included in the introductory part of the book. On the other hand, dedicated chapters describe the utilization of advanced numerical modeling in understanding the properties of complex materials. This book is useful for students and researchers from diverse backgrounds including chemistry, physics, materials science & engineering, biotechnology and biomedical engineering. It is well suited as a textbook for students and as a reference book for researchers.