Download or read book Fundamentals of Engineering High Performance Actuator Systems written by Kenneth Hummel and published by SAE International. This book was released on 2016-12-01 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Actuators are the key to allowing machines to become more sophisticated and perform complex tasks that were previously done by humans, providing motion in a safe, controlled manner. As defined in this book, actuator design is a subset of mechanical design. It involves engineering the mechanical components necessary to make a product move as desired. Fundamentals of Engineering High-Performance Actuator Systems, by Ken Hummel, was written as a text to supplement actuator design courses, and a reference to engineers involved in the design of high-performance actuator systems. It highlights the design approach and features what should be considered when moving a payload at precision levels and/or speeds that are not as important in low-performance applications. The main areas covered in this book are: Fundamentals of actuator design Actuator performance Loads that the actuator and its surrounding structure must accommodate Constraints which determine the type of load the actuator needs to accommodate The design margin applied to components of any given design Environment which must include the interactions between product and the conditions it will have to perform under Component strength to ensure safety from failure Component stiffness Maintainability Reliability Cost
Download or read book Actuators and Their Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-03 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: As demand has increased for new types of equipment that are more suited to the ever-evolving world of industry, demand for both new and traditional types of actuators has soared. From automotive and aeronautical to biomedical and robotics, engineers are constantly developing actuating devices that are adapted to their particular needs in their particular field, and actuators are used in almost every field of engineering that there is. This volume not only lays out the fundamentals of actuators, such as how they operate, the different kinds, and their various applications, but it also informs the engineer or student about the new actuators that are being developed and the state-of-the-art of actuators. Edited and written by highly experienced and well-respected engineers with a deep understanding of their subject, there is no other volume on actuators that is more current or comprehensive. Whether as a guide for the latest innovations in actuators, a refresher reference work for the veteran engineer, or an introductory text for the engineering student, this is a must-have for any engineer’s or university’s library. Covering the theory and the practical applications, this breakthrough volume is a “one stop shop” for any engineer or student interested in actuators.
Download or read book Design Rules for Actuators in Active Mechanical Systems written by Oriol Gomis-Bellmunt and published by Springer Science & Business Media. This book was released on 2009-10-29 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Design Rules for Actuators in Active Mechanical Systems" deals with the formulation of model-based design rules to be used in the conception of optimized mechatronic and adaptronic systems. The book addresses the comparison of different actuator classes for given applications and offers answers to the following questions: What is the relationship between actuator geometry and primary output quantities? How scalable are actuators based on the same principle? How are energetic output quantities (work and power) related to mechanical load and geometry? How should actuators be designed and sized to obtain the best performance for the chosen actuator kind, and for a given application? "Design Rules for Actuators in Active Mechanical Systems" will be of use to industry professionals, such as actuator and machine designers, as well as to researchers and students of mechanical engineering, mechatronics, and electrical engineering.
Download or read book Emerging Actuator Technologies written by José L. Pons and published by John Wiley & Sons. This book was released on 2005-09-27 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Actuators are devices that convert electrical energy into mechanical work, traditionally used in electrical, pneumatic and hydraulic systems. As the demand for actuator technologies grows in biomedical, prosthetic and orthotic applications, there is an increasing need for complex and sophisticated products that perform efficiently also when scaled to micro and nano domains. Providing a comprehensive overview of actuators for novel applications, this excellent book: * Presents a mechatronic approach to the design, control and integration of a range of technologies covering piezoelectric actuators, shape memory actuators, electro-active polymers, magnetostrictive actuators and electro- and magnetorheological actuators. * Examines the characteristics and performance of emerging actuators upon scaling to micro and nano domains. * Assesses the relative merits of each actuator technology and outlines prospective application fields. Offering a detailed analysis on current advances in the field, this publication will appeal to practising electrical and electronics engineers developing novel actuator systems. Mechanical and automation engineers, computer scientists and researchers will also find this a useful resource.
Download or read book Actuators written by Hartmut Janocha and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by a team of acknowledged experts, this book presents a multidisciplinary view of the state of the art in the field of actuators. The goal of the book is to provide a comprehensive overview of the properties, applications, and potential applications of traditional and unconventional actuators, together with their corresponding power electronics. Special attention is paid to the objective assessment of competing actuator principles. The book is written primarily for designers and engineers in research and development, but will also be valuable as a textbook for students of automation engineering, mechatronics and adaptronics.
Download or read book The Development of a Full Architecture For High Performance Actuators For Navy Applications written by and published by . This book was released on 2000 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research conducted under the auspices of this ONR Research Proposal represents a significant foundation for the development of high performance actuator systems. Collectively, this research addresses several major component technologies (Prime Movers, Sensors, and Software) within the actuator, as well as providing a foundation for the development of multi-criteria decision-making techniques to support actuator intelligence. Together, these technologies merit consideration for continued development and eventual inclusion in the development of SABBs to support future naval demands for high performance automation systems. Notably, while all of these reports describe promising technologies and approaches to the challenges facing automation systems, further research is required in numerous areas to realize their full potential as deployable components.
Download or read book Advances in Electric Propulsion written by Jean L Broge and published by SAE International. This book was released on 2017-05-18 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aviation propulsion development continues to rely upon fossil fuels for the vast majority of commercial and military applications. Until these fuels are depleted or abandoned, burning them will continue to jeopardize air quality and provoke increased regulation. With those challenges in mind, research and development of more efficient and electric propulsion systems will expand. Fuel-cell technology is but one example that addresses such emission and resource challenges, and others, including negligible acoustic emissions and the potential to leverage current infrastructure models. For now, these technologies are consigned to smaller aircraft applications, but are expected to mature toward use in larger aircraft. Additionally, measures such as electric/conventional hybrid configurations will ultimately increase efficiencies and knowledge of electric systems while minimizing industrial costs. Requirements for greater flight time, stealth characteristics, and thrust-to-power ratios adds urgency to the development of efficient propulsion methods for applications such as UAVs, which looks to technologies such as asymmetrical capacitors to enhance electric propulsion efficiency. This book will take the reader through various technologies that will enable a more-electric aircraft future, as well as design methods and certification requirements of more-electric engines.
Download or read book Automotive Software Engineering written by Thomas Zurawka and published by SAE International. This book was released on 2016-09-18 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early seventies, the development of the automobile has been characterized by a steady increase in the deploymnet of onboard electronics systems and software. This trend continues unabated and is driven by rising end-user demands and increasingly stringent environmental requirements. Today, almost every function onboard the modern vehicle is electronically controlled or monitored. The software-based implementation of vehicle functions provides for unparalleled freedoms of concept and design. However, automobile development calls for the accommodation of contrasting prerequisites – such as higher demands on safety and reliability vs. lower cost ceilings, longer product life cycles vs. shorter development times – along with growing proliferation of model variants. Automotive Software Engineering has established its position at the center of these seemingly conflicting opposites. This book provides background basics as well as numerous suggestions, rare insights, and cases in point concerning those processes, methods, and tools that contribute to the surefooted mastery of the use of electronic systems and software in the contemporary automobile.
Download or read book On Drive Systems for High Performance Machines and Design of an Air Motor particle Brake Actuator written by Kenneth Alan Pasch and published by . This book was released on 1984 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensors and Actuators written by Clarence W. de Silva and published by CRC Press. This book was released on 2007-01-29 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a unified and integrated coverage, this book introduces practical applications and tools of control system instrumentation. It includes topics such as component interconnection, analog sensors and transducers, signal conditioning, performance specification, stepper motors, and digital transducers.
Download or read book The High Speed Electromechanical Actuator written by Burkhard Deter and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration and Coupling of High Performance Dielectric Elastomer Actuator Systems written by Andrew Hinitt and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensors Actuators and Their Interfaces written by Nathan Ida and published by . This book was released on 2013-12-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This undergraduate textbook introduces students to the principles and applications of sensors and actuators, crossing multiple disciplines including aerospace, biomedical, chemical, civil, electrical and mechanical engineering. An excellent professional reference for those needing to learn the basics of sensing and actuation, this book is a good choice for industry training seminars. This book "connects the dots" of theory and circuits basics into meaningful systems and real-world applications. Designed to introduce students and practitioners to the principles and applications of sensors and actuators, this book discusses processing hardware and the embedded systems software that connects them. It is written based on the theory that a system is made of three components: Inputs, Outputs and Processors and looks at sensors and actuators based on the broad area of detection. Important coverage is given to interfacing (the processes and mechanisms between the sensor and actuator) that make a system work reliably and accurately. The material is presented with clear explanations, examples and diagrams, making it ideal for students and practitioners concerned with systems engineering in a broad variety of fields, especially those that depend on sensors for detecting pre-determined conditions. Supplementary materials for professors are available via email to [email protected].
Download or read book Electro hydraulic Actuation Systems written by J. Jaidev Vyas and published by . This book was released on 2019 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves as a unique integrated platform, which not only describes the design methodology of electro-hydraulic actuation systems but also provides insights into the design of the servo valve, which is the most important component in the system. It presents a step-by-step design process, comparative tables, illustrative figures, and detailed explanations. The book focuses on the design and testing of electro-hydraulic actuation systems, which are increasingly being used in motion control applications, particularly in those where precision actuation at high operational rates is of prime importance. It describes in detail the design philosophy of such high-performance systems, presenting a system used as a physical test setup together with experimental results to corroborate the calculations. Of particular interest are the electro-hydraulic servo valves that form the heart of these actuations. These valves are complex and not much data is available in open literature due to OEM propriety issues. In this context, the book discusses the elaborate mathematical models that have been derived and an approach to validate the mathematical models with test results. Presenting the complex methodology in simple language, it will prove to be a valuable resource for students, researchers, and professional engineers alike.
Download or read book Aeronautical Engineering A Cumulative Index to a Continuing Bibliography supplement 261 written by and published by . This book was released on 1991 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Fundamentals An Introduction to Engineering SI Edition written by Saeed Moaveni and published by Cengage Learning. This book was released on 2011-01-01 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically designed as an introduction to the exciting world of engineering, ENGINEERING FUNDAMENTALS: AN INTRODUCTION TO ENGINEERING encourages students to become engineers and prepares them with a solid foundation in the fundamental principles and physical laws. The book begins with a discovery of what engineers do as well as an inside look into the various areas of specialization. An explanation on good study habits and what it takes to succeed is included as well as an introduction to design and problem solving, communication, and ethics. Once this foundation is established, the book moves on to the basic physical concepts and laws that students will encounter regularly. The framework of this text teaches students that engineers apply physical and chemical laws and principles as well as mathematics to design, test, and supervise the production of millions of parts, products, and services that people use every day. By gaining problem solving skills and an understanding of fundamental principles, students are on their way to becoming analytical, detail-oriented, and creative engineers. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.