Download or read book Fundamentals and Emerging Applications of Low Dimensional Magnets written by Ram K. Gupta and published by CRC Press. This book was released on 2022-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides fundamentals of low dimensional magnets and a comprehensive discussion on magnetic nanomaterials for emerging applications.
Download or read book Emerging Applications of Low Dimensional Magnets written by Ram K. Gupta and published by CRC Press. This book was released on 2022-11-28 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-dimensional magnetic materials find their wide applications in many areas, including spintronics, memory devices, catalysis, biomedical, sensors, electromagnetic shielding, aerospace, and energy. This book provides a comprehensive discussion on magnetic nanomaterials for emerging applications. Fundamentals along with applications of low-dimensional magnetic materials in spintronics, catalysis, memory, biomedicals, toxic waste removal, aerospace, telecommunications, batteries, supercapacitors, flexible electronics, and many more are covered in detail to provide a full spectrum of their advanced applications. This book offers fresh aspects of nanomagnetic materials and innovative directions to scientists, researchers, and students. It will be of particular interest to materials scientists, engineers, physicists, chemists, and researchers in electronic and spintronic industries, and is suitable as a textbook for undergraduate and graduate studies.
Download or read book Fundamentals of Low Dimensional Magnets written by Ram K. Gupta and published by CRC Press. This book was released on 2022-08-29 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: A low-dimensional magnet is a key to the next generation of electronic devices. In some respects, low-dimensional magnets refer to nanomagnets (nanostructured magnets) or single-molecule magnets (molecular nanomagnets). They also include the group of magnetic nanoparticles, which have been widely used in biomedicine, technology, industries, and environmental remediation. Low-dimensional magnetic materials can be used effectively in the future in powerful computers (hard drives, magnetic random-access memory, ultra-low power consumption switches, etc.). The properties of these materials largely depend on the doping level, phase, defects, and morphology. This book covers various nanomagnets and magnetic materials. The basic concepts, various synthetic approaches, characterizations, and mathematical understanding of nanomaterials are provided. Some fundamental applications of 1D, 2D, and 3D materials are covered. This book provides the fundamentals of low-dimensional magnets along with synthesis, theories, structure-property relations, and applications of ferromagnetic nanomaterials. This book broadens our fundamental understanding of ferromagnetism and mechanisms for realization and advancement in devices with improved energy efficiency and high storage capacity.
Download or read book Fundamentals of Low Dimensional Magnets written by Ram K. Gupta and published by CRC Press. This book was released on 2022-08-29 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: A low-dimensional magnet is a key to the next generation of electronic devices. In some respects, low-dimensional magnets refer to nanomagnets (nanostructured magnets) or single-molecule magnets (molecular nanomagnets). They also include the group of magnetic nanoparticles, which have been widely used in biomedicine, technology, industries, and environmental remediation. Low-dimensional magnetic materials can be used effectively in the future in powerful computers (hard drives, magnetic random-access memory, ultra-low power consumption switches, etc.). The properties of these materials largely depend on the doping level, phase, defects, and morphology. This book covers various nanomagnets and magnetic materials. The basic concepts, various synthetic approaches, characterizations, and mathematical understanding of nanomaterials are provided. Some fundamental applications of 1D, 2D, and 3D materials are covered. This book provides the fundamentals of low-dimensional magnets along with synthesis, theories, structure-property relations, and applications of ferromagnetic nanomaterials. This book broadens our fundamental understanding of ferromagnetism and mechanisms for realization and advancement in devices with improved energy efficiency and high storage capacity.
Download or read book Low Dimensional Magnetism written by A.N. Vasiliev and published by CRC Press. This book was released on 2019-07-16 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-dimensional magnetism physics involves the search for new magnetic compounds and improving their characteristics to meet the needs of innovative technologies. A comprehensive overview of key materials, their formulation data and characteristics are detailed by the author. Key selling features: Explores dominant mechanisms of magnetic interaction to determine the parameters of exchange interactions in new magnetic materials. Describes how magnetism and superconductivity not only compete, but also "help" each other. Details characteristics of key materials in the magnetic subsystem. Results of several internationally renowned research groups are included and cited. Suitable for a wide range of readers in physics, materials science, and chemistry interested in the problems of the structure of matter.
Download or read book Emerging Energy Materials written by Govind Nair and published by CRC Press. This book was released on 2024-03-14 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Energy Materials: Applications and Challenges guides the reader through materials used in progressive energy systems. It tackles their use in energy storage across solar, bio, geothermal, wind, fossil, hydrogen, nuclear, and thermal energy. Specific chapters are dedicated to energy reaping systems currently in development. This book contributes to the current literature by highlighting concerns that are frequently overlooked in energy materials textbooks. Awareness of these challenges and contemplation of possible solutions is critical for advancing the field of energy material technologies. Key features: Provides up-to-date information on the synthesis, characterization, and a range of applications using various physical and chemical methods Presents the latest advances in future energy materials and technologies subjected to specific applications Includes applied illustrations, references, and advances in order to explain the challenges and trade-offs in the field of energy material research and development Includes coverage of solar cell and photovoltaic, hydro power, nuclear energy, fuel cell, battery electrode, supercapacitor and hydrogen storage applications This book is a timely reference for researchers looking to improve their understanding of emerging energy materials, as well as postgraduate students considering a career within materials science, renewable energy and materials chemistry.
Download or read book Bioelectronics written by Anuj Kumar and published by CRC Press. This book was released on 2022-12-08 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioelectronics is emerging as a new area of research where electronics can selectively detect, record, and monitor physiological signals. This is a rapidly expanding area of medical research, that relies heavily on multidisciplinary technology development and cutting-edge research in chemical, biological, engineering, and physical science. This book provides extensive information on the (i) fundamental concepts of bioelectronics, (ii) materials for the developments of bioelectronics such as implantable electronics, self-powered devices, bioelectronic sensors, flexible bioelectronics, etc, and (iii) an overview of the trends and gathering of the latest bioelectronic progress. This book will broaden our knowledge about newer technologies and processes used in bioelectronics.
Download or read book Hydrogels written by Anuj Kumar and published by CRC Press. This book was released on 2023-09-27 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for advanced energy devices such as high-performance batteries, supercapacitors, fuel cells, electrolyzers, and flexible/wearable devices is increasing rapidly. To meet such demand, high-performance and stable materials that could be used as active materials in these devices are much needed. This book focuses on the use of hydrogels in such emerging applications. The main objective of this book is to provide current, state-of-the-art development in hydrogel-based materials, their applications in energy, and their future challenges. This book covers the entire spectrum of hydrogels for their applications in a range of energy devices in terms of materials, various synthetic approaches, architectural aspects, design and technology of energy devices, and challenges. This book covers the fundamentals of hydrogels, various composites of hydrogels, design concepts, different technologies, and applications in the diverse energy area. All chapters are written by experts in these areas around the world, making this a suitable textbook for students and providing new guidelines to researchers and industries working in these areas. This book includes topics such as various approaches to synthesizing hydrogels, their characterizations, and emerging applications in the energy area. Fundamentals of energy devices, working principles, and their challenges are also covered. This book will provide new directions to scientists, researchers, and students to better understand hydrogel-based materials and their emerging applications in energy.
Download or read book Handbook of Silicon Carbide Materials and Devices written by Zhe Chuan Feng and published by CRC Press. This book was released on 2023-07-10 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents the key properties of silicon carbide (SiC), the power semiconductor for the 21st century. It describes related technologies, reports the rapid developments and achievements in recent years, and discusses the remaining challenging issues in the field. The book consists of 15 chapters, beginning with a chapter by Professor W. J. Choyke, the leading authority in the field, and is divided into four sections. The topics include presolar SiC history, vapor-liquid-solid growth, spectroscopic investigations of 3C-SiC/Si, developments and challenges in the 21st century; CVD principles and techniques, homoepitaxy of 4H-SiC, cubic SiC grown on 4H-SiC, SiC thermal oxidation processes and MOS interface, Raman scattering, NIR luminescent studies, Mueller matrix ellipsometry, Raman microscopy and imaging, 4H-SiC UV photodiodes, radiation detectors, and short wavelength and synchrotron X-ray diffraction. This comprehensive work provides a strong contribution to the engineering, materials, and basic science knowledge of the 21st century, and will be of interest to material growers, designers, engineers, scientists, postgraduate students, and entrepreneurs.
Download or read book Magnetic Materials written by Otitoaleke Gideon Akinola and published by . This book was released on 2021 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two dimensional magnetic materials hold the promise of helping to achieve beyond CMOS computing tasks. 2D magnetic materials can be used in fabricating magnetic tunnel junctions with higher tunnel magnetoresistance which can then be applied to making new neuromorphic computing architectures primarily geared towards artificial intelligence and machine learning applications. In this work I summarize my synthesis and investigation of the properties of Cr2C which belongs to the group of 2D transition metal carbides or nitrides called MXenes. Cr2C has been predicted to have intrinsic half metallic ferromagnetic behaviors. These magnetic behaviors can be tuned based on the level of functionalization of the surface of the material. I show different parameters such as etchant, reaction temperature, and molar concentration that I have tuned in order to optimally derive Cr2C from its parent MAX phase Cr2AlC by removing the Al layer with a fluoride salt and hydrochloric acid. I also show how magnetic tunnel junctions (MTJs), which are two ferromagnetic layers with a tunnel barrier in between, can be used to make a synapse which is a neuromorphic computing primitive. The synapse circuit that I have proposed displays spike timing dependent plasticity which is an integral component of learning and memory in the brain. I show how different delay conditions between the presynaptic signal and the postsynaptic signal lead to currents of different magnitudes flowing through the ferromagnetic layer of the magnetic tunnel junction synapse. I also show how these currents move the domain wall both in micromagnetic simulation and using a domain wall MTJ Spice model that has been developed. I went on to wire four of these synapses together to observe the temporal dynamics of the system. My results show that the lower the delay between the presynaptic pulse and the postsynaptic pulse, the higher the current through the MTJ synapse and hence the larger the domain wall displacement. These studies pave the way for empirical understanding of the Cr2C MXene, including its potential magnetic properties, as well as doing online machine learning classification tasks with arrays of magnetic synapses
Download or read book Advances in 3D Bioprinting written by Roger J. Narayan and published by CRC Press. This book was released on 2023-08-11 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: "3D bioprinting" refers to processes in which an additive manufacturing approach is used to create devices for medical applications. This volume considers exciting applications for 3D bioprinting, including its use in manufacturing artificial tissues, surgical models, and orthopedic implants. The book includes chapters from leaders in the field on 3D bioprinting of tissues and organs, biomedical applications of digital light processing, biomedical applications of nozzle-free pyro-electrohydrodynamic jet printing of buffer-free bioinks, additive manufacturing of surgical models, dental crowns, and orthopedic implants, 3D bioprinting of dry electrodes, and 3D bioprinting for regenerative medicine and disease modeling of the ocular surface. This is an accessible reference for students and researchers on current 3D bioprinting technology, providing helpful information on the important applications of this technology. It will be a useful resource to students, researchers, and practitioners in the rapidly growing global 3D bioprinting community.
Download or read book Fundamentals and Emerging Applications of Polyaniline written by Masoud Mozafari and published by Elsevier. This book was released on 2019-08-09 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Emerging Applications of Polyaniline presents in-depth coverage of synthetic routes, characterization tools, experimental procedures, and the preparation of PANI-based materials for advanced applications. Sections examine the various synthetic routes available for the polymerization of aniline, covering both conventional methods and new approaches, specific PANI-based materials, and their potential applications. Users will be able to understand how to use these methods in areas such as electromagnetic interference shielding, rechargeable batteries, light emitting diodes, super capacitors, anti-static packaging and coatings, photonics, biomedical applications, chemical and biochemical sensors. This is a highly valuable source of information for researchers, scientists and graduate students in polymer science, polymer composites, polymer chemistry, nanotechnology, physics and materials science. Covers the latest synthetic approaches, such as ultrasound-assisted polymerization, irradiation path and electrochemical polymerization Offers detailed information on PANI-based composites, including graphene, CNT and functionalized polyaniline Explains how different PANI-based materials can be geared for specific cutting-edge applications across a range of fields
Download or read book Handbook of Spintronics written by Yongbing Xu and published by Springer. This book was released on 2015-10-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over two volumes and 1500 pages, the Handbook of Spintronics will cover all aspects of spintronics science and technology, including fundamental physics, materials properties and processing, established and emerging device technology and applications. Comprising 60 chapters from a large international team of leading researchers across academia and industry, the Handbook provides readers with an up-to-date and comprehensive review of this dynamic field of research. The opening chapters focus on the fundamental physical principles of spintronics in metals and semiconductors, including an introduction to spin quantum computing. Materials systems are then considered, with sections on metallic thin films and multilayers, magnetic tunnelling structures, hybrids, magnetic semiconductors and molecular spintronic materials. A separate section reviews the various characterisation methods appropriate to spintronics materials, including STM, spin-polarised photoemission, x-ray diffraction techniques and spin-polarised SEM. The third part of the Handbook contains chapters on the state of the art in device technology and applications, including spin valves, GMR and MTJ devices, MRAM technology, spin transistors and spin logic devices, spin torque devices, spin pumping and spin dynamics and other topics such as spin caloritronics. Each chapter considers the challenges faced by researchers in that area and contains some indications of the direction that future work in the field is likely to take. This reference work will be an essential and long-standing resource for the spintronics community.
Download or read book Handbook of Semiconductors written by Ram K. Gupta and published by CRC Press. This book was released on 2024-07-10 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with state-of-the-art knowledge of established and emerging semiconducting materials, their processing, and the fabrication of chips and microprocessors. In addition to covering the fundamentals of these materials, it details the basics and workings of many semiconducting devices and their role in modern electronics and explores emerging semiconductors and their importance in future devices. • Provides readers with latest advances in semiconductors. • Covers diodes, transistors, and other devices using semiconducting materials. • Covers advances and challenges in semiconductors and their technological applications. • Discusses fundamentals and characteristics of emerging semiconductors for chip manufacturing. This book provides directions to scientists, engineers, and researchers in materials engineering and related disciplines to help them better understand the physics, characteristics, and applications of modern semiconductors.
Download or read book Fundamentals of Micro Optics written by Hans Zappe and published by Cambridge University Press. This book was released on 2010-09-30 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: From optical fundamentals to advanced applications, this comprehensive guide to micro-optics covers all the key areas for those who need an in-depth introduction to micro-optic devices, technologies, and applications. Topics covered range from basic optics, optical materials, refraction, and diffraction, to micro-mirrors, micro-lenses, diffractive optics, optoelectronics, and fabrication. Advanced topics, such as tunable and nano-optics, are also discussed. Real-world case studies and numerous worked examples are provided throughout, making complex concepts easier to follow, whilst an extensive bibliography provides a valuable resource for further study. With exercises provided at the end of each chapter to aid and test understanding, this is an ideal textbook for graduate and advanced undergraduate students taking courses in optics, photonics, micro-optics, microsystems, and MEMs. It is also a useful self-study guide for research engineers working on optics development.
Download or read book The Search for Molecular based Magnets written by Wanru Zhang and published by . This book was released on 1995 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Approaches to the Lattice Engineering of Transparent Low dimensional Magnets written by Gayatri Vyas and published by . This book was released on 1995 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
