Download or read book FRP Composites for Reinforced and Prestressed Concrete Structures written by Perumalsamy Balaguru and published by CRC Press. This book was released on 2008-11-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: High strength fibre composites (FRPs) have been used with civil structures since the 1980s, mostly in the repair, strengthening and retrofitting of concrete structures. This has attracted considerable research, and the industry has expanded exponentially in the last decade. Design guidelines have been developed by professional organizations in a number of countries including USA, Japan, Europe and China, but until now designers have had no publication which provides practical guidance or accessible coverage of the fundamentals. This book fills this void. It deals with the fundamentals of composites, and basic design principles, and provides step-by-step guidelines for design. Its main theme is the repair and retrofit of un-reinforced, reinforced and prestressed concrete structures using carbon, glass and other high strength fibre composites. In the case of beams, the focus is on their strengthening for flexure and shear or their stiffening. The main interest with columns is the improvement of their ductility; and both strengthening and ductility improvement of un-reinforced structures are covered. Methods for evaluating the strengthened structures are presented. Step by step procedures are set out, including flow charts, for the various structural components, and design examples and practice problems are used to illustrate. As infrastructure ages worldwide, and its demolition and replacement becomes less of an option, the need for repair and retrofit of existing facilities will increase. Besides its audience of design professionals, this book suits graduate and advanced undergraduate students.
Download or read book Anchorage Zone Reinforcement for Post tensioned Concrete Girders written by John Edward Breen and published by Transportation Research Board. This book was released on 1994 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Concrete Structures Using High strength Steel Reinforcement written by Bahram M. Shahrooz and published by Transportation Research Board. This book was released on 2011 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 679: Design of Concrete Structures Using High-Strength Steel Reinforcement evaluates the existing American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) Bridge Design Specifications relevant to the use of high-strength reinforcing steel and other grades of reinforcing steel having no discernible yield plateau. The report also includes recommended language to the AASHTO LRFD Bridge Design Specifications that will permit the use of high-strength reinforcing steel with specified yield strengths not greater than 100 ksi. The Appendixes to NCHRP Report 679 were published online.
Download or read book Examples for the Design of Structural Concrete with Strut and tie Models written by American Concrete Institute. Convention and published by . This book was released on 2002 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Prepared by members of ACI Subcommittee 445-1, Strut and Tie Models, for sessions at the Fall Convention in Phoenix, October 27 to November 1, 2002, and sponsored by Joint ACI-ASCE Committee 445, Shear and Torsion and ACI Committee 318-E, Shear and Torsion."
Download or read book Design of Reinforced Concrete written by Jack C. McCormac and published by . This book was released on 2005 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Bond of Reinforcement in Concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2000-01-01 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In 1993, the CEB Commission 2 Material and Behavior Modelling established the Task Group 2.5 Bond Models. It's terms of reference were ... to write a state-of-art report concerning bond of reinforcement in concrete and later recommend how the knowledge could be applied in practice (Model Code like text proposal)... {This work} covers the first part ... the state-of-art report."--Pref.
Download or read book Seismic Design of Precast Concrete Building Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this state-of-art report is to present current practices for use of precast and prestressed concrete in countries in seismic regions, to recommend good practice, and to discuss current developments. The report has been drafted by 30 contributors from nine different countries. This state-of-art report covers: state of the practice in various countries; advantages and disadvantages of incorporating precast reinforced and prestressed concrete in construction; lessons learned from previous earthquakes; construction concepts; design approaches; primary lateral load resisting systems (precast and prestressed concrete frame systems and structural walls including dual systems) diaphragms of precast and prestressed concrete floor units; modelling and analytical methods; gravity load resisting systems; foundations; and miscellaneous elements (shells, folded plates, stairs and architectural cladding panels). Design equations are reported where necessary, but the emphasis is on principles. Ordinary cast-in-place reinforced concrete is not considered in this report. This fib state-of-the-art report is intended to assist designers and constructors to provide safe and economical applications of structural precast concrete and at the same time to allow innovation in design and construction to continue. This Bulletin N° 27 was approved as an fib state-of-art report in autumn 2002 byfib Commission 7, Seismic design.
Download or read book Post tensioning Manual written by Post-Tensioning Institute and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PCI Journal written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Failures in Concrete Structures written by Robin Whittle and published by CRC Press. This book was released on 2012-11-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of the author‘s firsthand experience with incidents related to reinforced and prestressed concrete structures, helping readers gain an understanding of errors that can occur in order to avoid making them. He includes mistakes discovered at the design stage, ones that led to failures, and some that involved partial structure collapse all of which required remedial action to ensure safety. The book focuses on specific incidents that occurred at various points in the construction process, including mistakes related to structural misunderstanding, extrapolation of codes of practice, and poor construction.
Download or read book Fibre reinforced Polymer Reinforcement For Concrete Structures In 2 Volumes Proceedings Of The Sixth International Symposium On Frp Reinforcement For Concrete Structures Frprcs 6 written by Kiang Hwee Tan and published by World Scientific. This book was released on 2003-06-20 with total page 1526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced polymer (FRP) reinforcement has been used in construction as either internal or external reinforcement for concrete structures in the past decade. This book provides the latest research findings related to the development, design and application of FRP reinforcement in new construction and rehabilitation works. The topics include FRP properties and bond behaviour, externally bonded reinforcement for flexure, shear and confinement, FRP structural shapes, durability, member behaviour under sustained loads, fatigue loads and blast loads, prestressed FRP tendons, structural strengthening applications, case studies, and codes and standards.
Download or read book FRP Composites for Reinforced and Prestressed Concrete Structures written by Perumalsamy Balaguru and published by CRC Press. This book was released on 2008-11-05 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: High strength fibre composites (FRPs) have been used with civil structures since the 1980s, mostly in the repair, strengthening and retrofitting of concrete structures. This has attracted considerable research, and the industry has expanded exponentially in the last decade. Design guidelines have been developed by professional organizations in a nu
Download or read book Fibre Reinforced Polymer Reinforcement for Concrete Structures written by Kiang Hwee Tan and published by World Scientific. This book was released on 2003 with total page 1526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced polymer (FRP) reinforcement has been used in construction as either internal or external reinforcement for concrete structures in the past decade. This book provides the latest research findings related to the development, design and application of FRP reinforcement in new construction and rehabilitation works. The topics include FRP properties and bond behaviour, externally bonded reinforcement for flexure, shear and confinement, FRP structural shapes, durability, member behaviour under sustained loads, fatigue loads and blast loads, prestressed FRP tendons, structural strengthening applications, case studies, and codes and standards.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anchorage zone design written by Gregor P. Wollmann and published by . This book was released on 2000 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides guidance on comprehensive treatment of tendon anchorage zone requirements and analysis methods. Special emphasis on practical applications of strut and tie design approach, which is recommended by AASHTO and ACI. Step by step design analyses for a number of typical anchorage zone conditions.
Download or read book ACI Structural Journal written by and published by . This book was released on 2009 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:
