Download or read book Full Field Measurements and Identification in Solid Mechanics written by Michel Grediac and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book presents cutting-edge developments by experts in the field on the rapidly developing and scientifically challenging area of full-field measurement techniques used in solid mechanics – including photoelasticity, grid methods, deflectometry, holography, speckle interferometry and digital image correlation. The evaluation of strains and the use of the measurements in subsequent parameter identification techniques to determine material properties are also presented. Since parametric identification techniques require a close coupling of theoretical models and experimental measurements, the book focuses on specific modeling approaches that include finite element model updating, the equilibrium gap method, constitutive equation gap method, virtual field method and reciprocity gap method. In the latter part of the book, the authors discuss two particular applications of selected methods that are of special interest to many investigators: the analysis of localized phenomenon and connections between microstructure and constitutive laws. The final chapter highlights infrared measurements and their use in the mechanics of materials. Written and edited by knowledgeable scientists, experts in their fields, this book will be a valuable resource for all students, faculties and scientists seeking to expand their understanding of an important, growing research area
Download or read book Full field measurements and identification in solid mechanics written by François Hild and published by . This book was released on 2007 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Full Field Measurements and Identification in Solid Mechanics 2011 written by and published by . This book was released on 2013 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Virtual Fields Method written by Fabrice Pierron and published by Springer Science & Business Media. This book was released on 2012-03-21 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Virtual Fields Method: Extracting Constitutive Mechanical Parameters from Full-field Deformation Measurements is the first and only one on the Virtual Fields Method, a recent technique to identify materials mechanical properties from full-field measurements. It contains an extensive theoretical description of the method as well as numerous examples of application to a wide range of materials (composites, metals, welds, biomaterials etc.) and situations(static, vibration, high strain rate etc.). Finally, it contains a detailed training section with examples of progressive difficulty to lead the reader to program the VFM. This is accompanied with a set of commented Matlab programs as well as with a GUI Matlab based software for more general situations.
Download or read book Application of Imaging Techniques to Mechanics of Materials and Structures Volume 4 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2012-08-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This the fourth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 58 chapters on Application of Imaging Techniques to Mechanics of Materials and Structure. It presents findings from experimental and computational investigations involving a range of imaging techniques including Recovery of 3D Stress Intensity Factors From Surface Full-field Measurements, Identification of Cohesive-zone Laws From Crack-tip Deformation Fields, Application of High Speed Digital Image Correlation for Vibration Mode Shape Analysis, Characterization of Aluminum Alloys Using a 3D Full Field Measurement, and Low Strain Rate Measurements on Explosives Using DIC.
Download or read book Lagrangian Mechanics written by Anh Le Van and published by John Wiley & Sons. This book was released on 2019-06-03 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lagrangian Mechanics explains the subtleties of analytical mechanics and its applications in rigid body mechanics. The authors demonstrate the primordial role of parameterization, which conditions the equations and thus the information obtained; the essential notions of virtual kinematics, such as the virtual derivative and the dependence of the virtual quantities with respect to a reference frame; and the key concept of perfect joints and their intrinsic character, namely the invariance of the fields of compatible virtual velocities with respect to the parameterization. Throughout the book, any demonstrated results are stated with the respective hypotheses, clearly indicating the applicability conditions for the results to be ready for use. Numerous examples accompany the text, facilitating the understanding of the calculation mechanisms. The book is mainly intended for Bachelor's, Master's or engineering students who are interested in an in-depth study of analytical mechanics and its applications.
Download or read book Proceedings of the RILEM International Symposium on Bituminous Materials written by Hervé Di Benedetto and published by Springer Nature. This book was released on 2021-09-25 with total page 1806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in bituminous materials and structures and asphalt pavement technology, as presented by leading international researchers and engineers at the RILEM International Symposium on Bituminous Materials (ISBM), held in Lyon, France on December 14-16, 2020. The symposium represents a joint effort of three RILEM Technical Committees from Cluster F: 264-RAP “Asphalt Pavement Recycling”, 272-PIM “Phase and Interphase Behaviour of Bituminous Materials”, and 278-CHA “Crack-Healing of Asphalt Pavement Materials”. It covers a diverse range of topics concerning bituminous materials (bitumen, mastics, mixtures) and road, railway and airport pavement structures, including: recycling, phase and interphase behaviour, cracking and healing, modification and innovative materials, durability and environmental aspects, testing and modelling, multi-scale properties, surface characteristics, structure performance, modelling and design, non-destructive testing, back-analysis, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations.
Download or read book Compressible Flow Propulsion and Digital Approaches in Fluid Mechanics written by Michel Ledoux and published by John Wiley & Sons. This book was released on 2017-01-18 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide an efficient methodology of solving a fluid mechanics problem, based on an awareness of the physical. It meets different objectives of the student, the future engineer or scientist: Simple sizing calculations are required to master today's numerical approach for solving complex practical problems.
Download or read book Virtual Work Approach to Mechanical Modeling written by Jean Salençon and published by John Wiley & Sons. This book was released on 2018-02-21 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is centred about the Principle of virtual work and the related method for mechanical modelling. It aims at showing and enhancing the polyvalence and versatility of the virtual work approach in the mechanical modelling process. The virtual work statement is set as the principle at the root of a force modelling method that can be implemented on any geometrical description. After experimentally induced hypotheses have been made on the geometrical parameters that describe the concerned system and subsystems, the method provides a unifying framework for building up consistently associated force models where external and internal forces are introduced through their virtual rates of work. Systems described as three-dimensional, curvilinear or planar continua are considered: force models are established with the corresponding equations of motion; the validation process points out that enlarging the domain of relevance of the model for practical applications calls for an enrichment of the geometrical description that takes into account the underlying microstructure.
Download or read book Mechanics of Aeronautical Composite Materials written by Christophe Bouvet and published by John Wiley & Sons. This book was released on 2017-08-10 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the principles of composite laminate sizing widely used for composite structures. The focus is on aeronautics in particular, including the concepts of limit loads and ultimate loads. After a brief overview of the main composite materials used in aeronautics, the basic theory of laminated plates and the associated rupture criteria are given. The author presents two fundamental cases of the sizing of aeronautical composite structures: the calculation of the holed structures and their subsequent multi-bolt joints, and the calculation of the buckling. The concept of damage tolerance is also explored, with a focus on its application for tolerance to impact damage. These notions are fundamental for understanding the specificities of the sizing of aeronautical composite structures. The book also contains corrected exercises for the reader to test their understanding of the different topics covered.
Download or read book ICPMG2014 Physical Modelling in Geotechnics written by Christophe Gaudin and published by CRC Press. This book was released on 2019-01-08 with total page 1366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Physical Modelling in Geotechnics (ICPMG2014) was organised by the Centre for Offshore Foundation Systems at the University of Western Australia under the auspices of the Technical Committee 104 for Physical Modelling in Geotechnics of the International Society of Soil Mechanics and Geotechnical Engineering. This quadrennial conference is the traditional focal point for the physical modelling community of academics, scientists and engineers to present and exchange the latest developments on a wide range of physical modelling aspects associated with geotechnical engineering. These proceedings, together with the seven previous proceedings dating from 1988, present an inestimable collection of the technical and scientific developments and breakthroughs established over the last 25 years. These proceedings include 10 keynote lectures from scientific leaders within the physical modelling community and 160 peer-reviewed papers from 26 countries. They are organised in 14 themes, presenting the latest developments in physical modelling technology, modelling techniques and sensors, through a wide range of soil-structure interaction problems, including shallow and deep foundations, offshore geotechnics, dams and embankments, excavations and retaining structures and slope stability. Fundamental aspects of earthquake engineering, geohazards, ground reinforcements and improvements, and soil properties and behaviour are also covered, demonstrating the increasing complexity of modelling arising from state-of-the-art technological developments and increased understanding of similitude principles. A special theme on education presents the latest developments in the use of physical modelling techniques for instructing undergraduate and postgraduate students in geotechnical engineering.
Download or read book International Digital Imaging Correlation Society written by Michael Sutton and published by Springer. This book was released on 2017-03-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection represents a single volume of technical papers presented at the Annual International DIC Society Conference and SEM Fall Conference organized by the Society for Experimental Mechanics and Sandia National Laboratories and held in Philadelphia, PA, November 7-10, 2016. The volume presents early findings from experimental, standards development and various other investigations concerning digital image correlation - an important area within Experimental Mechanics. The area of Digital Image Correlation has been an integral track within the SEM Annual Conference spearheaded by Professor Michael Sutton from the University of South Carolina. In 2016, the SEM and Sandia joined their collaborative strengths to launch a standing fall meeting focusing specifically on developments in the area of Digital Image Correlation. The contributed papers within this volume span numerous technical aspects of DIC including standards development for the industry.
Download or read book MECHANICAL ENGINEERING ENERGY SYSTEMS AND SUSTAINABLE DEVELOPMENT Volume V written by Konstantin V. Frolov and published by EOLSS Publications. This book was released on 2009-04-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering, Energy Systems and Sustainable Development theme is a component of Encyclopedia of Physical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Mechanical Engineering, Energy Systems and Sustainable Development with contributions from distinguished experts in the field discusses mechanical engineering - the generation and application of heat and mechanical power and the design, production, and use of machines and tools. These five volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers, NGOs and GOs.
Download or read book From Prognostics and Health Systems Management to Predictive Maintenance 2 written by Brigitte Chebel-Morello and published by John Wiley & Sons. This book was released on 2017-07-17 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second volume in a set of books dealing with the evolution of technology, IT and organizational approaches and what this means for industrial equipment. The authors address this increasing complexity in two parts, focusing specifically on the field of Prognostics and Health Management (PHM). Having tackled the PHM cycle in the first volume, the purpose of this book is to tackle the other phases of PHM, including the traceability of data, information and knowledge, and the ability to make decisions accordingly. The book concludes with a summary analysis and perspectives regarding this emerging domain, since without traceability, knowledge and decision, any prediction of the health state of a system cannot be exploited.
Download or read book Advanced Numerical Methods with Matlab 1 written by Bouchaib Radi and published by John Wiley & Sons. This book was released on 2018-03-15 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most physical problems can be written in the form of mathematical equations (differential, integral, etc.). Mathematicians have always sought to find analytical solutions to the equations encountered in the different sciences of the engineer (mechanics, physics, biology, etc.). These equations are sometimes complicated and much effort is required to simplify them. In the middle of the 20th century, the arrival of the first computers gave birth to new methods of resolution that will be described by numerical methods. They allow solving numerically as precisely as possible the equations encountered (resulting from the modeling of course) and to approach the solution of the problems posed. The approximate solution is usually computed on a computer by means of a suitable algorithm. The objective of this book is to introduce and study the basic numerical methods and those advanced to be able to do scientific computation. The latter refers to the implementation of approaches adapted to the treatment of a scientific problem arising from physics (meteorology, pollution, etc.) or engineering (structural mechanics, fluid mechanics, signal processing, etc.) .
Download or read book Advanced Numerical Methods with Matlab 2 written by Bouchaib Radi and published by John Wiley & Sons. This book was released on 2018-05-24 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to introduce and study numerical methods basic and advanced ones for scientific computing. This last refers to the implementation of appropriate approaches to the treatment of a scientific problem arising from physics (meteorology, pollution, etc.) or of engineering (mechanics of structures, mechanics of fluids, treatment signal, etc.). Each chapter of this book recalls the essence of the different methods resolution and presents several applications in the field of engineering as well as programs developed under Matlab software.
Download or read book Reliability of Maintained Systems Subjected to Wear Failure Mechanisms written by Franck Bayle and published by John Wiley & Sons. This book was released on 2019-04-10 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, the reliability of systems has become a major issue in most industrial applications. The theoretical approach to estimating reliability was largely developed in the 1960s for maintenance-free systems, and more recently, in the late 1990s, it was developed for maintenance-based systems. Customers’ expectations concerning reliability (as well as maintenance, safety, etc.) are growing ever more demanding over the generations of systems. However, the theoretical methods used to handle the systems are not suitable when aging mechanisms are present. This book proposes a theoretical approach to estimate all of these quantities correctly. In addition to the theoretical aspect, it details a number of issues that any industrial system will meet sooner or later, whether due to design flaws, the batch of components, manufacturing problems or new technologies that result in the aging of mechanisms during their operational use.
