Download or read book Fundamentals of Combustion Processes written by Sara McAllister and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Combustion Processes is designed as a textbook for an upper-division undergraduate and graduate level combustion course in mechanical engineering. The authors focus on the fundamental theory of combustion and provide a simplified discussion of basic combustion parameters and processes such as thermodynamics, chemical kinetics, ignition, diffusion and pre-mixed flames. The text includes exploration of applications, example exercises, suggested homework problems and videos of laboratory demonstrations
Download or read book Combustion of Liquid Fuel Sprays written by Alan Williams and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion of Liquid Fuel Sprays outlines the fundamentals of the combustion of sprays in a unified way which may be applied to any technological application. The book begins with a discussion of the general nature of spray combustion, the sources of liquid fuels used in spray combustion, biomass sources of liquid fuels, and the nature and properties of fuel oils. Subsequent chapters focus on the properties of sprays, the atomization of liquid fuels, and the theoretical modeling of the behavior of a spray flame in a combustion chamber. The nature and control of pollutants from spray combustion, the formation of deposits in oil-fired systems, and the combustion of sprays in furnaces and engines are elucidated as well. The text is intended for students undertaking courses or research in fuel, combustion, and energy studies.
Download or read book Combustion Theory written by Forman A. Williams and published by CRC Press. This book was released on 2018-03-05 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Theory delves deeper into the science of combustion than most other texts and gives insight into combustions from a molecular and a continuum point of view. The book presents derivations of the basic equations of combustion theory and contains appendices on the background of subjects of thermodynamics, chemical kinetics, fluid dynamics, and transport processes. Diffusion flames, reactions in flows with negligible transport and the theory of pre-mixed flames are treated, as are detonation phenomena, the combustion of solid propellents, and ignition, extinction, and flamibility pehnomena.
Download or read book Combustion Technology written by Vasudevan Raghavan and published by John Wiley & Sons. This book was released on 2016-08-01 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the fundamentals aspects of combustion, covering fundamental thermodynamics and chemical kinetics through to practical burners. It provides a detailed analysis of the basic ideas and design characteristics of burners for gaseous, liquid and solid fuels. End of chapter review questions help the reader to evaluate their understanding of both the fundamental as well as the application aspects. Furthermore, a chapter on alternative renewable fuels has been included to bring out the need, characteristics and usage of alternative fuels along with fossil fuels. A section on future trends in fuels and burners is also provided. Several key research articles have been cited in the text and listed in the references.
Download or read book Combustion Processes written by Bernard Lewis and published by Princeton University Press. This book was released on 2015-12-08 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume II of the High Speed Aerodynamics and Jet Propulsion series. This volume includes treatments of all aspects of combustion necessary to the development of jet and rocket engines. Originally published in 1956. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Droplets and Sprays written by Sergei Sazhin and published by Springer. This book was released on 2014-05-19 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a clear and systematic description of droplets and spray dynamic models, this book maximises reader insight into the underlying physics of the processes involved, outlines the development of new physical and mathematical models and broadens understanding of interactions between the complex physical processes which take place in sprays. Complementing approaches based on the direct application of computational fluid dynamics (CFD), Droplets and Sprays treats both theoretical and practical aspects of internal combustion engine process such as the direct injection of liquid fuel, subcritical heating and evaporation. Including case studies that illustrate the approaches relevance to automotive applications, it is also anticipated that the described models can find use in other areas such as in medicine and environmental science.
Download or read book Droplets and Sprays written by Saptarshi Basu and published by Springer. This book was released on 2017-12-11 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on droplets and sprays relevant to combustion and propulsion applications. The book includes fundamental studies on the heating, evaporation and combustion of individual droplets and basic mechanisms of spray formation. The contents also extend to the latest analytical, numerical and experimental techniques for investigating the behavior of sprays in devices like combustion engines and gas turbines. In addition, the book explores several emerging areas like interactions between sprays and flames and the dynamic characteristics of spray combustion systems on the fundamental side, as well as the development of novel fuel injectors for specific devices on the application side. Given its breadth of coverage, the book will benefit researchers and professionals alike.
Download or read book Fluid Dynamics and Transport of Droplets and Sprays written by W. A. Sirignano and published by Cambridge University Press. This book was released on 2010-01-11 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the theoretical foundations of spray and droplet applications relevant to the technology for active control of sprays applied to new products and applications, improved product performance, cost reductions, and improved environmental outcomes. It also covers theory related to power and propulsion; materials processing and manufacturing technologies including droplet-based net form processing, coating, and painting; medication; pesticides and insecticides; and other consumer uses.
Download or read book Gas Turbine Combustion written by Arthur H. Lefebvre and published by CRC Press. This book was released on 2010-04-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the developments in gas turbine combustion technology that have occurred in the last decade, Gas Turbine Combustion: Alternative Fuels and Emissions, Third Edition provides an up-to-date design manual and research reference on the design, manufacture, and operation of gas turbine combustors in applications ranging from aeronautical to po
Download or read book Combustion Science and Engineering written by Kalyan Annamalai and published by CRC Press. This book was released on 2006-12-19 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Students embarking on their studies in chemical, mechanical, aerospace, energy, and environmental engineering will face continually changing combustion problems, such as pollution control and energy efficiency, throughout their careers. Approaching these challenges requires a deep familiarity with the fundamental theory, mathematics, and physical concepts of combustion. Based on more than two decades of teaching experience, Combustion Science and Engineering lays the necessary groundwork while using an illustrative, hands-on approach. Taking a down-to-earth perspective, the book avoids heavy mathematics in the first seven chapters and in Chapter 17 (pollutants formation and destruction), but considers molecular concepts and delves into engineering details. It begins with an outline of thermodynamics; basics of thermochemistry and chemical equilibrium; descriptions of solid, liquid, and gaseous fuels; chemical kinetics and mass transfer; and applications of theory to practical systems. Beginning in chapter 8, the authors provide a detailed treatment of differential forms of conservation equations; analyses of fuel combustion including jet combustion and boundary layer problems; ignition; flame propagation; interactive and group combustion; pollutant formation and control; and turbulent combustion. In addition, this textbook includes abundant examples, illustrations, and exercises, as well as spreadsheet software in combustion available for download. This software allows students to work out the examples found in the text. Combustion Science and Engineering imparts the skills and foundational knowledge necessary for students to successfully approach and solve new problems.
Download or read book Combustion written by Irvin Glassman and published by Academic Press. This book was released on 2014-12-02 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout its previous four editions, Combustion has made a very complex subject both enjoyable and understandable to its student readers and a pleasure for instructors to teach. With its clearly articulated physical and chemical processes of flame combustion and smooth, logical transitions to engineering applications, this new edition continues that tradition. Greatly expanded end-of-chapter problem sets and new areas of combustion engineering applications make it even easier for students to grasp the significance of combustion to a wide range of engineering practice, from transportation to energy generation to environmental impacts. Combustion engineering is the study of rapid energy and mass transfer usually through the common physical phenomena of flame oxidation. It covers the physics and chemistry of this process and the engineering applications—including power generation in internal combustion automobile engines and gas turbine engines. Renewed concerns about energy efficiency and fuel costs, along with continued concerns over toxic and particulate emissions, make this a crucial area of engineering. - New chapter on new combustion concepts and technologies, including discussion on nanotechnology as related to combustion, as well as microgravity combustion, microcombustion, and catalytic combustion—all interrelated and discussed by considering scaling issues (e.g., length and time scales) - New information on sensitivity analysis of reaction mechanisms and generation and application of reduced mechanisms - Expanded coverage of turbulent reactive flows to better illustrate real-world applications - Important new sections on stabilization of diffusion flames—for the first time, the concept of triple flames will be introduced and discussed in the context of diffusion flame stabilization
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Dust Explosion Dynamics written by Russell A. Ogle and published by Butterworth-Heinemann. This book was released on 2016-09-10 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dust Explosion Dynamics focuses on the combustion science that governs the behavior of the three primary hazards of combustible dust: dust explosions, flash fires, and smoldering. It explores the use of fundamental principles to evaluate the magnitude of combustible dust hazards in a variety of settings. Models are developed to describe dust combustion phenomena using the principles of thermodynamics, transport phenomena, and chemical kinetics. Simple, tractable models are described first and compared with experimental data, followed by more sophisticated models to help with future challenges. Dr. Ogle introduces the reader to just enough combustion science so that they may read, interpret, and use the scientific literature published on combustible dusts. This introductory text is intended to be a practical guide to the application of combustible dust models, suitable for both students and experienced engineers. It will help you to describe the dynamics of explosions and fires involving dust and evaluate their consequences which in turn will help you prevent damage to property, injury and loss of life from combustible dust accidents. - Demonstrates how the fundamental principles of combustion science can be applied to understand the ignition, propagation, and extinction of dust explosions - Explores fundamental concepts through model-building and comparisons with empirical data - Provides detailed examples to give a thorough insight into the hazards of combustible dust as well as an introduction to relevant scientific literature
Download or read book Vapor Liquid Equilibria Using Unifac written by Aage Fredenslund and published by Elsevier. This book was released on 2012-12-02 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vapor-Liquid Equilibria Using UNIFAC: A Group-Contribution Method focuses on the UNIFAC group-contribution method used in predicting quantitative information on the phase equilibria during separation by estimating activity coefficients. Drawing on tested vapor-liquid equilibrium data on which UNIFAC is based, it demonstrates through examples how the method may be used in practical engineering design calculations. Divided into nine chapters, this volume begins with a discussion of vapor and liquid phase nonidealities and how they are calculated in terms of fugacity and activity coefficients, respectively. It then introduces the reader to the UNIFAC method and how it works, the procedure used in establishing the parameters needed for the model, prediction of binary and multicomponent vapor-liquid equilibria for a large number of systems, the potential of UNIFAC for predicting liquid-liquid equilibria, and how UNIFAC can be used to solve practical distillation design problems. This book will benefit process design engineers who want to reliably predict phase equilibria for designing distillation columns and other separation processes.
Download or read book Basic Considerations in the Combustion of Hydrocarbon Fuels with Air written by Lewis Flight Propulsion Laboratory. Propulsion Chemistry Division and published by . This book was released on 1958 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Internal Combustion Processes of Liquid Rocket Engines written by Zhen-Guo Wang and published by John Wiley & Sons. This book was released on 2016-08-29 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on modeling and numerical simulations of combustion in liquid rocket engines, covering liquid propellant atomization, evaporation of liquid droplets, turbulent flows, turbulent combustion, heat transfer, and combustion instability. It presents some state of the art models and numerical methodologies in this area. The book can be categorized into two parts. Part 1 describes the modeling for each subtopic of the combustion process in the liquid rocket engines. Part 2 presents detailed numerical methodology and several representative applications in simulations of rocket engine combustion.
Download or read book Introduction to Physics and Chemistry of Combustion written by Michael A. Liberman and published by Springer Science & Business Media. This book was released on 2010-03-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the material covered in this book deals with the fundamentals of chemistry and physics of key processes and fundamental mechanisms for various combustion and combustion related phenomena in gaseous combustible mixture. It provides the reader with basic knowledge of burning processes and mechanisms of reaction wave propagation. The combustion of a gas mixture (flame, explosion, detonation) is necessarily accompanied by motion of the gas. The process of combustion is therefore not only a chemical phenomenon but also one of gas dynamics. The material selection focuses on the gas phase and with premixed gas combustion. Premixed gas combustion is of practical importance in engines, modern gas turbine and explosions, where the fuel and air are essentially premixed, and combustion occurs by the propagation of a front separating unburned mixture from fully burned mixture. Since premixed combustion is the most fundamental and potential for practical applications, the emphasis in the present work is be placed on regimes of premixed combustion. This text is intended for graduate students of different specialties, including physics, chemistry, mechanical engineering, computer science, mathematics and astrophysics.
