Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book Making Cars More Fuel Efficient written by European Conference of Ministers of Transport and published by ECMT/OECD. This book was released on 2005 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies show that cars use significantly more fuel per km than suggested by official certification test ratings, and some argue that this gap is growing as a percentage of the tested value. This has raised concerns that national fuel efficiency and carbon dioxide emissions reduction goals will not be met, and that consumers will lose faith in reported fuel economy figures. This publication analyses the fuel efficiency gap and examines technologies available that could reduce that gap and improve fuel economy, as well as considering policy options for encouraging uptake of these technologies by vehicle manufacturers and, in some cases, by consumers themselves.
Download or read book Transitions to Alternative Vehicles and Fuels written by National Research Council and published by National Academies Press. This book was released on 2013-04-14 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a century, almost all light-duty vehicles (LDVs) have been powered by internal combustion engines operating on petroleum fuels. Energy security concerns about petroleum imports and the effect of greenhouse gas (GHG) emissions on global climate are driving interest in alternatives. Transitions to Alternative Vehicles and Fuels assesses the potential for reducing petroleum consumption and GHG emissions by 80 percent across the U.S. LDV fleet by 2050, relative to 2005. This report examines the current capability and estimated future performance and costs for each vehicle type and non-petroleum-based fuel technology as options that could significantly contribute to these goals. By analyzing scenarios that combine various fuel and vehicle pathways, the report also identifies barriers to implementation of these technologies and suggests policies to achieve the desired reductions. Several scenarios are promising, but strong, and effective policies such as research and development, subsidies, energy taxes, or regulations will be necessary to overcome barriers, such as cost and consumer choice.
Download or read book Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance written by Richard Folkson and published by Woodhead Publishing. This book was released on 2022-07-27 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation, Second Edition provides a comprehensive view of key developments in advanced fuels and vehicle technologies to improve the energy efficiency and environmental impact of the automotive sector. Sections consider the role of alternative fuels such as electricity, alcohol and hydrogen fuel cells, as well as advanced additives and oils in environmentally sustainable transport. Other topics explored include methods of revising engine and vehicle design to improve environmental performance and fuel economy and developments in electric and hybrid vehicle technologies. This reference will provide professionals, engineers and researchers of alternative fuels with an understanding of the latest clean technologies which will help them to advance the field. Those working in environmental and mechanical engineering will benefit from the detailed analysis of the technologies covered, as will fuel suppliers and energy producers seeking to improve the efficiency, sustainability and accessibility of their work. - Provides a fully updated reference with significant technological advances and developments in the sector - Presents analyses on the latest advances in electronic systems for emissions control, autonomous systems, artificial intelligence and legislative requirements - Includes a strong focus on updated climate change predictions and consequences, helping the reader work towards ambitious 2050 climate change goals for the automotive industry
Download or read book Automotive Fuel Economy written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents realistic estimates for the level of fuel economy that is achievable in the next decade for cars and light trucks made in the United States and Canada. A source of objective and comprehensive information on the topic, this book takes into account real-world factors such as the financial conditions in the automotive industry, costs and benefits to consumers, and marketability of high-efficiency vehicles. The committee is composed of experts from the fields of science, technology, finance, and regulation and offers practical evaluations of technological improvements that could contribute to increased fuel efficiency. The volume also examines potential barriers to improvement, such as high production costs, regulations on safety and emissions, and consumer preferences. This practical book is of considerable interest to car and light truck manufacturers, policymakers, federal and state agencies, and the public.
Download or read book Effectiveness and Impact of Corporate Average Fuel Economy CAFE Standards written by National Research Council and published by National Academies Press. This book was released on 2002-01-29 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since CAFE standards were established 25 years ago, there have been significant changes in motor vehicle technology, globalization of the industry, the mix and characteristics of vehicle sales, production capacity, and other factors. This volume evaluates the implications of these changes as well as changes anticipated in the next few years, on the need for CAFE, as well as the stringency and/or structure of the CAFE program in future years.
Download or read book Energy Technology Innovation written by Arnulf Grubler and published by Cambridge University Press. This book was released on 2014 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: An edited volume on factors determining success or failure of energy technology innovation, for researchers and policy makers.
Download or read book Tires and Passenger Vehicle Fuel Economy written by and published by Transportation Research Board. This book was released on 2006 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Efficient Car Technology written by Mark L. Poulton and published by Computational Mechanics. This book was released on 1997 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents measures designed to reduce fuel consumption in passenger cars.
Download or read book The Guide to Electric Hybrid Fuel Efficient Cars written by Jacques Duval and published by Juniper Publishing. This book was released on 2016-06-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Passionate about sustainable development? Introducing the world’s first guide to electric cars! In the first edition of what promises to be the new bestseller in the world of cars, our authors explain the latest on electric vehicles. Speaking to amateurs and more seasoned enthusiasts alike, our two experts answer all your questions: how do you recharge and service an electric vehicle? Are electric cars built for North American winters? Can you even drive on electricity every day of the week? Do you really save money when you go electric? Do electric vehicles have the speed you need? Would a hydrogen car be a wiser choice? Are the batteries in electric cars harmful to the environment—are they dangerous like the oil companies say? Does the government chip in when you buy an electric vehicle? Jacques Duval and Daniel Breton have tested over 70 different models that are on the market now or will be in a matter of months. They get down to the nitty-gritty with in-depth commentary from page one. Learn all there is to know about tech features, pricing, energy consumption stats, greenhouse gas emissions and pollutants. Just fifteen years ago, electric cars were a novelty—now, they’re becoming increasingly central to the automobile industry. Soon, the entire world will turn to this eco-friendly mode of transportation!
Download or read book Vehicle Propulsion Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2007-09-21 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors of this text have written a comprehensive introduction to the modeling and optimization problems encountered when designing new propulsion systems for passenger cars. It is intended for persons interested in the analysis and optimization of vehicle propulsion systems. Its focus is on the control-oriented mathematical description of the physical processes and on the model-based optimization of the system structure and of the supervisory control algorithms.
Download or read book Autonomous Vehicle Technology written by James M. Anderson and published by Rand Corporation. This book was released on 2014-01-10 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry appears close to substantial change engendered by “self-driving” technologies. This technology offers the possibility of significant benefits to social welfare—saving lives; reducing crashes, congestion, fuel consumption, and pollution; increasing mobility for the disabled; and ultimately improving land use. This report is intended as a guide for state and federal policymakers on the many issues that this technology raises.
Download or read book The World s Most Fuel Efficient Vehicle written by Jean-Jacques Santin and published by vdf Hochschulverlag AG. This book was released on 2007 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the PAC-Car project, a joint undertaking of ETH Zurich and ist partners, was to build a vehicle powered by a hydrogen fuel cell system that uses as little fuel as possible. PAC-Car II set a new world record in fuel efficient driving (the equivalent of 5,385 km per liter of gasoline) during the Shell Eco-marathon in Ladoux (France) on June 26, 2005. This book, addressed to graduate students, engineering professors and others interested in fuel economy contests, is the frst to summarize the issues involved when designing and constructing a vehicle for fuel economy competitions. It describes the adventure of developing the PAC-Car II and others some specifc technical advice for anyone who wants to design an ultra-lightweight land vehicle, whatever its energy source. PAC-Car was a joint project of ETH Zurich and partners from academia and industry. The goal was to build a vehicle powered by a fuel cell system that uses as little fuel as possible. PAC-Car II set a new world record in fuel efficient driving (5,385 km per liter of petrol equivalent) during the Shell Eco-marathon in Ladoux (France) on June 26, 2005. This book is the first to summarize the design and construction issues of a vehicle for fuel economy contests. It deals with the adventure of developing this world-record vehicle and provides some specific technical tips. It will help anyone who is designing an ultra lightweight land vehicle, whatever its source of energy (thermal engine, human power, solar panels), and/or those who are interested in fuel cell applications. The book addresses graduate students and teachers of engineering disciplines as well as other people interested in fuel economy contests. Content: fuel economy competitions, design phase of a fuel economy vehicle, tires, vehicle behavior, aerodynamics, vehicle body structure, wheels, front axle and steering system, powertrain, fuel cell system, driving strategy, conclusion and outlook.
Download or read book Where Is My Flying Car written by J. Storrs Hall and published by Stripe Press. This book was released on 2021-11-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: From an engineer and futurist, an impassioned account of technological stagnation since the 1970s and an imaginative blueprint for a richer, more abundant future The science fiction of the 1960s promised us a future remade by technological innovation: we’d vacation in geodesic domes on Mars, have meaningful conversations with computers, and drop our children off at school in flying cars. Fast-forward 60 years, and we’re still stuck in traffic in gas-guzzling sedans and boarding the same types of planes we flew in over half a century ago. What happened to the future we were promised? In Where Is My Flying Car?, J. Storrs Hall sets out to answer this deceptively simple question. What starts as an examination of the technical limitations of building flying cars evolves into an investigation of the scientific, technological, and social roots of the economic stagnation that started in the 1970s. From the failure to adopt nuclear energy and the suppression of cold fusion technology to the rise of a counterculture hostile to progress, Hall recounts how our collective ambitions for the future were derailed, with devastating consequences for global wealth creation and distribution. Hall then outlines a framework for a future powered by exponential progress—one in which we build as much in the world of atoms as we do in the world of bits, one rich in abundance and wonder. Drawing on years of original research and personal engineering experience, Where Is My Flying Car?, originally published in 2018, is an urgent, timely analysis of technological progress over the last 50 years and a bold vision for a better future.
Download or read book Vehicle Power Management written by Xi Zhang and published by Springer Science & Business Media. This book was released on 2011-08-12 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle Power Management addresses the challenge of improving vehicle fuel economy and reducing emissions without sacrificing vehicle performance, reliability and durability. It opens with the definition, objectives, and current research issues of vehicle power management, before moving on to a detailed introduction to the modeling of vehicle devices and components involved in the vehicle power management system, which has been proven to be the most cost-effective and efficient method for initial-phase vehicle research and design. Specific vehicle power management algorithms and strategies, including the analytical approach, optimal control, intelligent system approaches and wavelet technology, are derived and analyzed for realistic applications. Vehicle Power Management also gives a detailed description of several key technologies in the design phases of hybrid electric vehicles containing battery management systems, component optimization, hardware-in-the-loop and software-in-the-loop. Vehicle Power Management provides graduate and upper level undergraduate students, engineers, and researchers in both academia and the automotive industry, with a clear understanding of the concepts, methodologies, and prospects of vehicle power management.
