Download or read book Hydrogen Batteries and Fuel Cells written by Bengt Sundén and published by Academic Press. This book was released on 2019-07-02 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen, Batteries and Fuel Cells provides the science necessary to understand these important areas, considering theory and practice, practical problem-solving, descriptions of bottlenecks, and future energy system applications. The title covers hydrogen as an energy carrier, including its production and storage; the application and analysis of electrochemical devices, such as batteries, fuel cells and electrolyzers; and the modeling and thermal management of momentum, heat, mass and charge transport phenomena. This book offers fundamental and integrated coverage on these topics that is critical to the development of future energy systems. Combines coverage of hydrogen, batteries and fuel cells in the context of future energy systems Provides the fundamental science needed to understand future energy systems in theory and practice Gives examples of problems and solutions in the use of hydrogen, batteries and fuel cells Considers basic issues in understanding hydrogen and electrochemical devices Describes methods for modeling and thermal management in future energy systems
Download or read book Microfluidic Fuel Cells and Batteries written by Erik Kjeang and published by Springer. This book was released on 2014-06-14 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidic fuel cells and batteries represent a special type of electrochemical power generators that can be miniaturized and integrated in a microfluidic chip. Summarizing the initial ten years of research and development in this emerging field, this SpringerBrief is the first book dedicated to microfluidic fuel cell and battery technology for electrochemical energy conversion and storage. Written at a critical juncture, where strategically applied research is urgently required to seize impending technology opportunities for commercial, analytical, and educational utility, the intention is for this book to be a ‘one-stop shop’ for current and prospective researchers in the general area of membraneless, microfluidic electrochemical energy conversion. As the overall goal of the book is to provide a comprehensive resource for both research and technology development, it features extensive descriptions of the underlying fundamental theory, fabrication methods, and cell design principles, as well as a thorough review of previous contributions in this field and a future outlook with recommendations for further work. It is hoped that the content will entice and enable new research groups and engineers to rapidly gain traction in their own laboratories towards the development of next generation microfluidic electrochemical cells.
Download or read book Handbook of Batteries and Fuel Cells written by David Linden and published by McGraw-Hill Companies. This book was released on 1984 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Cells and Fuel Batteries written by H. A. Liebhafsky and published by John Wiley & Sons. This book was released on 1968 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Next Generation Batteries and Fuel Cells for Commercial Military and Space Applications written by A.R. Jha and published by CRC Press. This book was released on 2016-04-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distilling complex theoretical physical concepts into an understandable technical framework, Next-Generation Batteries and Fuel Cells for Commercial, Military, and Space Applications describes primary and secondary (rechargeable) batteries for various commercial, military, spacecraft, and satellite applications for covert communications, surveillan
Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. Chapters written by experts in each area Extensive bibliography supporting each chapter Detailed index Up-to-date diagrams and full colour illustrations
Download or read book Electrochemical Power Sources written by Vladimir S. Bagotsky and published by John Wiley & Sons. This book was released on 2015-01-07 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Power Sources (EPS) provides in a concise way the operational features, major types, and applications of batteries, fuel cells, and supercapacitors • Details the design, operational features, and applications of batteries, fuel cells, and supercapacitors • Covers improvements of existing EPSs and the development of new kinds of EPS as the results of intense R&D work • Provides outlook for future trends in fuel cells and batteries • Covers the most typical battery types, fuel cells and supercapacitors; such as zinc-carbon batteries, alkaline manganese dioxide batteries, mercury-zinc cells, lead-acid batteries, cadmium storage batteries, silver-zinc batteries and modern lithium batteries
Download or read book Metal Oxide Based Nanostructured Electrocatalysts for Fuel Cells Electrolyzers and Metal Air Batteries written by Teko Napporn and published by Elsevier. This book was released on 2021-01-30 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries is a comprehensive book summarizing the recent overview of these new materials developed to date. The book is motivated by research that focuses on the reduction of noble metal content in catalysts to reduce the cost associated to the entire system. Metal oxides gained significant interest in heterogeneous catalysis for basic research and industrial deployment. Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries puts these opportunities and challenges into a broad context, discusses the recent researches and technological advances, and finally provides several pathways and guidelines that could inspire the development of ground-breaking electrochemical devices for energy production or storage. Its primary focus is how materials development is an important approach to produce electricity for key applications such as automotive and industrial. The book is appropriate for those working in academia and R&D in the disciplines of materials science, chemistry, electrochemistry, and engineering. Includes key aspects of materials design to improve the performance of electrode materials for energy conversion and storage device applications Reviews emerging metal oxide materials for hydrogen production, hydrogen oxidation, oxygen reduction and oxygen evolution Discusses metal oxide electrocatalysts for water-splitting, metal-air batteries, electrolyzer, and fuel cell applications
Download or read book Fuel Cells written by Detlef Stolten and published by John Wiley & Sons. This book was released on 2016-05-31 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ready reference is unique in collating in one scientifically precise and comprehensive handbook the widespread data on what is feasible and realistic in modern fuel cell technology. Edited by one of the leading scientists in this exciting area, the short, uniformly written chapters provide economic data for cost considerations and a full overview of demonstration data, covering such topics as fuel cells for transportation, fuel provision, codes and standards. The result is highly reliable facts and figures for engineers, researchers and decision makers working in the field of fuel cells.
Download or read book Fuel Cell Fundamentals written by Ryan O'Hayre and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete, up-to-date, introductory guide to fuel cell technology and application Fuel Cell Fundamentals provides a thorough introduction to the principles and practicalities behind fuel cell technology. Beginning with the underlying concepts, the discussion explores fuel cell thermodynamics, kinetics, transport, and modeling before moving into the application side with guidance on system types and design, performance, costs, and environmental impact. This new third edition has been updated with the latest technological advances and relevant calculations, and enhanced chapters on advanced fuel cell design and electrochemical and hydrogen energy systems. Worked problems, illustrations, and application examples throughout lend a real-world perspective, and end-of chapter review questions and mathematical problems reinforce the material learned. Fuel cells produce more electricity than batteries or combustion engines, with far fewer emissions. This book is the essential introduction to the technology that makes this possible, and the physical processes behind this cost-saving and environmentally friendly energy source. Understand the basic principles of fuel cell physics Compare the applications, performance, and costs of different systems Master the calculations associated with the latest fuel cell technology Learn the considerations involved in system selection and design As more and more nations turn to fuel cell commercialization amidst advancing technology and dropping deployment costs, global stationary fuel cell revenue is expected to grow from $1.4 billion to $40.0 billion by 2022. The sector is forecasted to explode, and there will be a tremendous demand for high-level qualified workers with advanced skills and knowledge of fuel cell technology. Fuel Cell Fundamentals is the essential first step toward joining the new energy revolution.
Download or read book Battery Technology Handbook written by H.A. Kiehne and published by CRC Press. This book was released on 2003-08-29 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference remains the most comprehensive guide to the fundamental theories, techniques, and strategies used for battery operation and design. It includes new and revised chapters focusing on the safety, performance, quality, and enhancement of various batteries and battery systems. From automotive, electrochemical, and high-energy applications to system implementation, selection, and standardization, the Second Edition presents expert discussions on electrochemical energy storage, the advantages of battery-powered traction, the disposal and recycling of used batteries, hazard prevention, and the chemistry and physics of lithium primary batteries.
Download or read book Solid Oxide Fuel Cells written by Bin Zhu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents innovative approaches towards affordable, highly efficient, and reliable sustainable energy systems Written by leading experts on the subject, this book provides not only a basic introduction and understanding of conventional fuel cell principle, but also an updated view of the most recent developments in this field. It focuses on the new energy conversion technologies based on both electrolyte and electrolyte-free fuel cells?from advanced novel ceria-based composite electrolyte low temperature solid oxide fuel cells to non-electrolyte fuel cells as advanced fuel-to-electricity conversion technology. Solid Oxide Fuel Cells: From Electrolyte-Based to Electrolyte-Free Devices is divided into three parts. Part I covers the latest developments of anode, electrolyte, and cathode materials as well as the SOFC technologies. Part II discusses the non-electrolyte or semiconductor-based membrane fuel cells. Part III focuses on engineering efforts on materials, technology, devices and stack developments, and looks at various applications and new opportunities of SOFC using both the electrolyte and non-electrolyte principles, including integrated fuel cell systems with electrolysis, solar energy, and more. -Offers knowledge on how to realize highly efficient fuel cells with novel device structures -Shows the opportunity to transform the future fuel cell markets and the possibility to commercialize fuel cells in an extended range of applications -Presents a unique collection of contributions on the development of solid oxide fuel cells from electrolyte based to non-electrolyte-based technology -Provides a more comprehensive understanding of the advances in fuel cells and bridges the knowledge from traditional SOFC to the new concept -Allows readers to track the development from the conventional SOFC to the non-electrolyte or single-component fuel cell Solid Oxide Fuel Cells: From Electrolyte-Based to Electrolyte-Free Devices will serve as an important reference work to students, scientists, engineers, researchers, and technology developers in the fuel cell field.
Download or read book Fuel Cells written by Paul Breeze and published by Academic Press. This book was released on 2017-02-09 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells is a concise, up-to-date and accessible guide to the evolution of the use of electrochemistry to generate power. The author provides a comprehensive exploration of the history of fuel cells, the environmental concerns which came into prominence in the 1980s and the economic factors associated with this method of power generation. Examples discussed include Alkaline Fuel Cells, Phosphoric Acid Fuel Cells, Molton Carbonate Fuel Cells and Solid Oxide Fuel Cells, making this a valuable and insightful read for those in the power generation market and those in electrochemistry, such as engineers, managers and academics. Explores multiple variations of fuel cell technology and evaluates their cost and application Provides detailed historical context, beginning in 1839 with the development of electrolysis Discusses the most up-to-date advancements and methods of fuel cell technology today
Download or read book New Carbon Based Materials for Electrochemical Energy Storage Systems Batteries Supercapacitors and Fuel Cells written by Igor V. Barsukov and published by Springer Science & Business Media. This book was released on 2006-07-07 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews research work on electrochemical power sources in the former Warsaw Pact countries. It explores the role carbon plays in the cathodes and anodes of power sources and reveals the latest research into the development of metal air batteries, supercapacitors, fuel cells and lithium-ion and lithium-ion polymer batteries. For the first time, a full chapter was devoted to metal-carbon composites as electrode materials of lithium-ion batteries
Download or read book Fuel Cells and Hydrogen Production written by Timothy E. Lipman and published by Springer. This book was released on 2018-10-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expected end of the “oil age” will lead to increasing focus and reliance on alternative energy conversion devices, among which fuel cells have the potential to play an important role. Not only can phosphoric acid and solid oxide fuel cells already efficiently convert today’s fossil fuels, including methane, into electricity, but other types of fuel cells, such as polymer electrolyte membrane fuel cells, have the potential to become the cornerstones of a possible future hydrogen economy. This handbook offers concise yet comprehensive coverage of the current state of fuel cell research and identifies key areas for future investigation. Internationally renowned specialists provide authoritative introductions to a wide variety of fuel cell types and hydrogen production technologies, and discuss materials and components for these systems. Sustainability and marketing considerations are also covered, including comparisons of fuel cells with alternative technologies.
Download or read book New Promising Electrochemical Systems for Rechargeable Batteries written by V. Barsukov and published by Springer Science & Business Media. This book was released on 1996-02-29 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity is the most important secondary energy source, the present production rate, mainly from thermal electric power stations, being of the order of 1.3 TW. However, the total capacity of primary and rechargeable batteries currently in use is the same as the output of the world's power stations. But present battery systems will not meet future needs for the economical storage of large amounts of electrical energy for vehicles, public transport, road levelling, solar energy utilisation, civil video and audio, terrestrial and space communications, etc. Current accumulators based on aqueous acid or alkali systems do not have sufficient output and, moreover, the materials employed (Pb, Cd, Ni) are environmental pollutants that require safe recycling. Further, stocks of these strategic metals are being rapidly depleted. This book discusses actual field results with novel systems, such as rechargeable lithium batteries, zinc/air cells, metal-free accumulators, graphite/carbon devices and others, including fuel cells. The book stresses that a universal electrochemical system is not feasible: the choice of any system must depend on the concrete field of application and must be taken in consideration of a large number of technical, economic and environmental circumstances.
Download or read book Proceedings of the Symposium on Batteries and Fuel Cells for Stationary and Electric Vehicle Applications written by Albert R. Landgrebe and published by The Electrochemical Society. This book was released on 1993 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
