Download or read book Frontier Technology for Water Treatment and Pollutant Removal written by Puangrat Kajitvichyanukul and published by IWA Publishing. This book was released on 2019-11-15 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontier technology in water treatment and pollutant removal is needed not only for maximizing water reuse but also for the rapid detection of contaminants in the recycled water. The UN announced the years 2018 to 2028 as the ‘International Decade for Action–Water for Sustainable Development’. To realize this mission, innovative and frontier technologies for water treatment and pollutant removal are important components. This book aims to serve as a platform for updating the scientific community with recent progress in this area, covering frontier technologies in analytical technique, physicochemical treatment, chemical treatment, and biological treatment. In Focus – a book series that showcases the latest accomplishments in water research. Each book focuses on a specialist area with papers from top experts in the field. It aims to be a vehicle for in-depth understanding and inspire further conversations in the sector.
Download or read book Environmentally Friendly Bio Technologies for the Removal of Emerging Organic and Inorganic Pollutants from Water written by Eldon R. Rene and published by IWA Publishing. This book was released on 2019-08-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the impacts of emerging pollutants (both organic and inorganic) in water bodies and the role and performances of different water and wastewater treatment approaches that are presently being employed in the field of environmental engineering. Some of these approaches are focused on ‘end-of-pipe’ treatment, while most of these approaches are focused on the application of novel physic-chemical and biological techniques for wastewater treatment and reuse. The goal of this book is to present the emerging technologies and trends in the field of water and wastewater treatment. The papers in this book provide clear proof that environmentally friendly (bio)technologies are becoming more and more important and playing a critical role in removing a wide variety of organic and inorganic pollutants from water. In Focus – a book series that showcases the latest accomplishments in water research. Each book focuses on a specialist area with papers from top experts in the field. It aims to be a vehicle for in-depth understanding and inspire further conversations in the sector.
Download or read book Proceedings of the 5th International Symposium on Water Resource and Environmental Management written by Haoqing Xu and published by Springer Nature. This book was released on 2023-06-10 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to be the introductory work in the new Sustainable Development of Water Resource and Environmental Management Series and provides an in-depth look at sustainable development and management in the water sector across. In the face of current global changes, the availability and quality of water resources are under severe threat. Indeed, in all sectors related to water resources management, sustainable development is important for present and future generations. This book includes selected papers from the 5th International Symposium on Water Resource and Environmental Management (WREM 2022) and consists of themes pertaining to water resource and environmental management. It provides readers with comprehensive information on the principles of sustainable water resources management, as well as recent advances, directions for future research, and policy development for sustainable water resources management. As a reference, it is of interest to students, scientists, engineers, government officials, and water resource managers.
Download or read book Advances in Water Treatment and Pollution Prevention written by Sanjay K. Sharma and published by Springer Science & Business Media. This book was released on 2012-06-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Water Treatment and Pollution Prevention explores the most up-to-date studies in the field of water pollution. More specifically, this book examines the causes and effects of this threatening phenomenon and identifies the preventive measures that can be taken to contain, and even to defeat, water pollution worldwide. The papers gathered in this volume pinpoint the need to implement greener water treatments to prevent water pollution from impacting ecosystems, human well-being and economies any further. They also successfully outline the processes that have been studied, optimized and developed so far to sustain our environment. Advances in Water Treatment and Pollution Prevention will represent a valuable resource to academic researchers, students, institutions, environmentalists, and anyone interested in environmental policies aimed at safeguarding both the quality and the quantity of water.
Download or read book Nanomaterials for Water Treatment and Remediation written by Srabanti Ghosh and published by CRC Press. This book was released on 2021-12-29 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a comprehensive view of water-treatment technologies, Nanomaterials for Water Treatment and Remediation explores recent developments in the use of advanced nanomaterials (ANMs) for water treatment and remediation. In-depth reaction mechanisms in water-treatment technologies, including adsorption, catalysis, and membrane filtration for water purification using ANMs, are discussed in detail. The book includes an investigation of the fabrication processes of nanostructured materials and the fundamental aspects of surfaces at the nanoscale. The book also covers the removal of water-borne pathogens and microbes through a photochemical approach. FEATURES Explains various chemical treatments for the removal and separation of hazardous dyes, organic pollutants, pharmaceuticals, and heavy metals from aqueous solutions, including adsorption, advanced oxidation process, and photocatalysis Discusses the rational design of nanoporous materials with a tunable pore structure and fabrication of nanomaterials by surface chemistry engineering Covers the role of nanomaterials-assisted oxidation and reduction processes, design of nano-assisted membrane-based separation, and multifunctional nanomaterials and nanodevices for water treatment Provides an understanding of the structure–activity relationship and stability of ANMs under critical experimental conditions Identifies potential challenges in the application of multifunctional ANMs for future research Nanomaterials for Water Treatment and Remediation is aimed at researchers and industry professionals in chemical, materials, and environmental engineering as well as related fields interested in the application of advanced materials to water treatment and remediation.
Download or read book Microbial Approaches for Sustainable Green Technologies written by Jata Shankar and published by CRC Press. This book was released on 2024-06-06 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbial systems have a strong potential to develop green and sustainable technologies, including sources of renewable energy, alternative fuels, and biosynthetic materials for sustainable applications. Advances in these technologies are evolving to meet growing demand and industries are adapting to green technologies such as solar panels, bioethanol, hydroponics, and more. With the aid of sophisticated technology and integration strategies, these industries are moving toward being more environmentally friendly and sustainable. This book serves as a guide to the newest technologies that will enable the implementation of microbial technologies in fostering an eco-friendly industrial and environmental landscape, which will have widely positive impacts for generations to come. Provides recent insights on diverse technologies involved in green technologies Explains the application of microbes via fungi to remediate pollutants and examines the latest treatment technologies in bioleaching and electronic waste treatment Provides updated information on bioenergy and flexible fungal materials as alternatives to plastics Discusses the application of IOT and communication electronics in the development of green technologies
Download or read book World Economic and Social Survey 2018 written by United Nations Publications and published by . This book was released on 2018-10-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication reviews the advances in frontier technologies including automation, robotics, renewable energy technologies, electric vehicles, biotechnologies and artificial intelligence and analyzes their economic, social and environmental impact. These technologies present immense potentials for the 2030 Agenda, fostering growth, prosperity and environmental sustainability. They also pose significant risks of unemployment, underemployment and rising income and wealth inequality and raise new ethical and moral concerns. The Survey identifies policy measures at national levels with the capacity to both maximize the potential of these technologies and mitigate their risks, thereby striking a balance among economic efficiency, equity and ethical considerations
Download or read book Physical Chemical and Biological Treatment Processes for Water and Wastewater written by Tushar Kanti Sen and published by Nova Science Publishers. This book was released on 2015-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water pollution occurs when toxic pollutants of varying kinds (organic, inorganic, radioactive and so on) are directly or indirectly discharged into water bodies without adequate treatment to remove such potential pollutants. Today's sources of these potential pollutants, which cause high deterioration of freshwater quality, are city sewage and industrial waste discharge, human agricultural practices, industrial waste disposal practices, mining activities, civil and structural work activities and obviously natural contamination with climate change. When our water is polluted, it is not only devastating to the environment but also to human health. Therefore, development of water and wastewater treatment processes to alleviate water pollution has been a challenging and demanding task for engineers, scientists and researchers. Perhaps this is even more challenging for underdeveloped and developing countries, where water and wastewater treatment facilities, knowledge and infrastructure are limited. Water and wastewater treatment processes are broad and often multidisciplinary in nature, comprising a mixture of research areas including physical, chemical and biological methods to remove or transform various potential pollutants. This is in hopes to achieve acceptable water quality and satisfy governmental and environmental protection agencies' laws and regulations. With these objectives, this book has been written in order to provide various research results and compilation and up-to-date development on the current states of knowledge and techniques in the broad field of water and wastewater treatment processes. Basically, this book will give a comprehensive understanding and advancement and application of various physical, chemical and biological treatment methods in the reduction of potential pollutants (inorganics/organics) from water and wastewater. There are a total 18 book chapters contributed by large number of expert authors around the world, covering the following main research areas: Physical, chemical and biological water treatment processes such as adsorption, biosorption, coagulation/flocculation, electrocoagulation, denitration, membrane filtration/separation, photo-catalytic reduction, advanced oxidation, nutrients removal by struvite crystallisation and nanotechnology; Physical, chemical and biological methods for municipal wastewater and industrial wastewater treatment plants such as primary-secondary sludge treatments, anaerobic digestions, aerobic treatment, activated sludge processes, dewaterability by flocculants, pre-treatments of sludge and rheology of sludge in wastewater treatment; Various operational units/equipment and process control of wastewater treatment plant.
Download or read book Advanced Nanomaterials for Water Engineering Treatment and Hydraulics written by Saleh, Tawfik A. and published by IGI Global. This book was released on 2017-01-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: While nanotechnology has been a booming research field for years, the study of how it can be used alongside water engineering has not been deeply explored. By examining the ways in which nanomaterials can aid hydraulics, these tools can be used for water purification, water treatments, and a vast array of other uses that will make water engineering easier and safer. Advanced Nanomaterials for Water Engineering, Treatment, and Hydraulics is a comprehensive reference source for the latest research-based material on the use of progressive nanotechnologies for water technologies. Featuring coverage on relevant topics such as water purification, nano-metal oxides, chitosan nanoparticles, and contaminated waste water, this is an ideal reference source for engineers, students, academics, and researchers seeking innovative perspectives on the use of nanomaterials in water engineering.
Download or read book Advances in Civil Engineering and Building Materials written by Shuenn-Yih Chang and published by CRC Press. This book was released on 2012-10-31 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Civil Engineering and Building Materials presents the state-of-the-art development in: - Structural Engineering - Road & Bridge Engineering - Geotechnical Engineering - Architecture & Urban Planning - Transportation Engineering - Hydraulic Engineering - Engineering Management - Computational Mechanics - Construction Technology - Building Materials - Environmental Engineering - Computer Simulation - CAD/CAE Emphasis was given to basic methodologies, scientific development and engineering applications. Advances in Civil Engineering and Building Materials will be useful to professionals, academics, and Ph.D. students interested in the above mentioned areas.
Download or read book Water Pollution written by United States. Congress. Senate. Committee on Public Works. Subcommittee on Air and Water Pollution and published by . This book was released on 1965 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Biosensors and Intelligent Medical Devices in Health and Disease written by Zhiwei Luo and published by Frontiers Media SA. This book was released on 2022-06-29 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Pollution Hearing 89 1 1965 written by United States. Congress. Senate. Committee on Public Works and published by . This book was released on 1965 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Pollution written by DIANE Publishing Company and published by DIANE Publishing. This book was released on 1994-12 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses whether wastewater treatment costs could be reduced by using alternative wastewater treatment systems. Addresses (1) whether there are cost-effective alternatives to conventional systems for collecting & treating wastewater, (2) whether barriers are limiting the use of these alternatives, & (3) how EPA is addressing the development of future technologies. Charts & tables.
Download or read book Graphene based Nanotechnologies for Energy and Environmental Applications written by Mohammad Jawaid and published by Elsevier. This book was released on 2019-08-02 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene-Based Nanotechnologies for Energy and Environmental Applications explores how graphene-based materials are being used to make more efficient, reliable products and devices for energy storage and harvesting and environmental monitoring and purification. The book outlines the major sustainable, recyclable, and eco-friendly methods for using a range of graphene-based materials in innovative ways. It represents an important information source for materials scientists and engineers who want to learn more about the use of graphene-based nanomaterials to create the next generation of products and devices in energy and environmental science. Graphene-based nanotechnologies are at the heart of some of the most exciting developments in the fields of energy and environmental research. Graphene has exceptional properties, which are being used to create more effective products for electronic systems, environmental sensing devices, energy storage, electrode materials, fuel cell, novel nano-sorbents, membrane and photocatalytic degradation of environmental pollutants especially in the field of water and wastewater treatment. Covers synthesis, preparation and application of graphene based nanomaterials from different sources Demonstrates systematic approaches to the design, synthesis, characterization and applications of graphene-based nanocomposites in order to establish their important relationship with end-user applications Discusses the challenges in ensuring reliability and scalability of graphene-based nanotechnologies
Download or read book Electrochemical Membrane Technology for Water and Wastewater Treatment written by Zhiwei Wang and published by Elsevier. This book was released on 2022-04-04 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical membrane technology has drawn extensive attention worldwide during the past decade in water and wastewater treatment. Coupling electrochemical process with membrane technology not only enables a higher removal or decomposition of pollutants in waters, but also ensures a more effective control of membrane fouling as well as a more highly selective separation process. The recent development of electrochemical membrane technology has also extended its applications in desalination, energy harvest, and resource recovery from seawater and wastewaters. Electrochemical Membrane Technology for Water and Wastewater Treatment consolidates state-of-the-art research developments in electrochemical membrane technology in water reclamation and sustainability in terms of fundamental theories, membrane and electrode materials, reactor designs, fouling control mechanisms and applications. Electrochemical Membrane Technology for Water and Wastewater Treatment also introduces fundamental theories and applications of electrochemical membrane technology. The knowledge gaps and future research perspectives in electrochemical membrane technology are also addressed. This book is an excellent resource for the understanding of fundamental theories, latest developments and future prospects in electrochemical membrane technology, which can benefit a broad audience of researchers and engineers working in water purification, membrane technology and electrochemical process. Consolidates scattered knowledge of electrochemical membrane technology into a more accessible resource Provides a comprehensive review of fundamental theories, membrane materials and module design as well as the latest developments of electrochemical membrane technology Provides the state-of-art review on the applications of electrochemical membrane technology Includes detailed discussion on the challenges and prospects of electrochemical membrane technology in different applications
Download or read book 3D Printing Technology for Water Treatment Applications written by Jitendra Kumar Pandey and published by Elsevier. This book was released on 2022-10-30 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing Technology for Water Treatment Applications provides a state-of-the-art presentation on the application of 3D printing technology in water treatment. The book discusses numerous processes and their scope for improvement through the use of 3D-printing technology, including pollutant separation from water and an overview of the advantages and disadvantages of different 3D printed technology over current technologies. In addition, the future outlook for device development using 3D printing water purification is explored. Finally, sustainability issues relating to 3D printing-based water purification processes are discussed, describing specific technologies such as 3D printed membranes. This book will serve as a vital resource for scientists, engineers and environmental professionals working in water treatment technologies. Takes an in-depth look at state-of-the-art water treatment methods Includes discussion of the application of 3D printed devices in areas such as water treatment, resource recovery and toxic ion removal Looks at current developments in the integration of adsorption technology with 3D printing technology
